Commit aa3fba9753d6def6a144054b0279588e1fdec573
Committed by
Stefano Babic
Stefano Babic
1 parent
c4a4346775
Exists in
smarc_8mq_lf_v2020.04
and in
9 other branches
mx6sabreauto: set SYS_MALLOC_F for video
Sabre Auto boards currently hang with: ``` U-Boot 2019.07-rc3-00057-gc41940c406 (Jun 03 2019 - 14:42:41 +0200) CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C)Reset cause: WDOG Model: Freescale i.MX6 Quad Plus SABRE Automotive Board Board: MX6Q-Sabreauto revA I2C: ready DRAM: 2 GiB Video device 'ipu@2400000' cannot allocate frame buffer memory -ensure the device is set up before relocation Error binding driver 'ipuv3_video': -28 Video device 'ipu@2800000' cannot allocate frame buffer memory -ensure the device is set up before relocation Error binding driver 'ipuv3_video': -28 Some drivers failed to bind Error binding driver 'generic_simple_bus': -28 Some drivers failed to bind initcall sequence 8ffe00b8 failed at call 1780e93b (err=-28) ``` Set SYS_MALLOC_F_LEN to reserve_video to work. This is similar to the change Peng Fan did for mx6sabresd (9002e735e717) Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Showing 1 changed file with 1 additions and 1 deletions Side-by-side Diff
configs/mx6sabreauto_defconfig
| ... | ... | @@ -4,6 +4,7 @@ |
| 4 | 4 | CONFIG_SPL_GPIO_SUPPORT=y |
| 5 | 5 | CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| 6 | 6 | CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| 7 | +CONFIG_SYS_MALLOC_F_LEN=0x4000 | |
| 7 | 8 | CONFIG_TARGET_MX6SABREAUTO=y |
| 8 | 9 | CONFIG_SPL_MMC_SUPPORT=y |
| 9 | 10 | CONFIG_SPL_SERIAL_SUPPORT=y |
| ... | ... | @@ -11,7 +12,6 @@ |
| 11 | 12 | CONFIG_SPL=y |
| 12 | 13 | CONFIG_SPL_LIBDISK_SUPPORT=y |
| 13 | 14 | CONFIG_NXP_BOARD_REVISION=y |
| 14 | -# CONFIG_SYS_MALLOC_F is not set | |
| 15 | 15 | CONFIG_FIT=y |
| 16 | 16 | CONFIG_SPL_FIT_PRINT=y |
| 17 | 17 | CONFIG_SPL_LOAD_FIT=y |