Eric Lee / smarc-uboot

Download as
Browse Code ยป

Commit c91d0c74cfe4c6c6e155392a6b057fa868719297

Authored by Jagannadha Sutradharudu Teki
Committed by Albert ARIBAUD
1 parent 9e0802bf82
Exists in master and in 50 other branches 8qm-imx_v2020.04_5.4.70_2.3.0, emb_lf_v2022.04, imx_v2015.04_4.1.15_1.0.0_ga, pitx_8mp_lf_v2020.04, smarc-8m-android-10.0.0_2.6.0, smarc-8m-android-11.0.0_2.0.0, smarc-8mp-android-11.0.0_2.0.0, smarc-emmc-imx_v2014.04_3.10.53_1.1.0_ga, smarc-emmc-imx_v2014.04_3.14.28_1.0.0_ga, smarc-imx-l5.0.0_1.0.0-ga, smarc-imx6_v2018.03_4.14.98_2.0.0_ga, smarc-imx7_v2017.03_4.9.11_1.0.0_ga, smarc-imx7_v2018.03_4.14.98_2.0.0_ga, smarc-imx_v2014.04_3.14.28_1.0.0_ga, smarc-imx_v2015.04_4.1.15_1.0.0_ga, smarc-imx_v2017.03_4.9.11_1.0.0_ga, smarc-imx_v2017.03_4.9.88_2.0.0_ga, smarc-imx_v2017.03_o8.1.0_1.3.0_8m, smarc-imx_v2018.03_4.14.78_1.0.0_ga, smarc-m6.0.1_2.1.0-ga, smarc-n7.1.2_2.0.0-ga, smarc-rel_imx_4.1.15_2.0.0_ga, smarc_8m-imx_v2018.03_4.14.98_2.0.0_ga, smarc_8m-imx_v2019.04_4.19.35_1.1.0, smarc_8m_00d0-imx_v2018.03_4.14.98_2.0.0_ga, smarc_8mm-imx_v2018.03_4.14.98_2.0.0_ga, smarc_8mm-imx_v2019.04_4.19.35_1.1.0, smarc_8mm-imx_v2020.04_5.4.24_2.1.0, smarc_8mp_lf_v2020.04, smarc_8mq-imx_v2020.04_5.4.24_2.1.0, smarc_8mq_lf_v2020.04, ti-u-boot-2015.07, v2014.01, v2014.04, v2014.04-smarct33, v2014.04-smarct33-emmc, v2014.04-smartmen, v2014.07, v2014.07-smarct33, v2014.07-smartmen, v2015.07-smarct33, v2015.07-smarct33-emmc, v2015.07-smarct4x, v2016.05-dlt, v2016.05-smarct3x, v2016.05-smarct3x-emmc, v2016.05-smarct4x, v2017.01-smarct3x, v2017.01-smarct3x-emmc, v2017.01-smarct4x

zynq: Enable CONFIG_DEFAULT_DEVICE_TREE 

Enabled default dts files on respective pre-board config
files this is way MAKEALL will works. and it's upto user
to build specific dts by specifying at build time.

$ make zynq_zc70x_config
$ make -->  with default dts zynq-zc702.dts
or
$ make DEVICE_TREE=zynq-zc702 --> Same configuration with zynq-zc706.dts

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>

Showing 4 changed files with 6 additions and 0 deletions Side-by-side Diff

include/configs/zynq_microzed.h
Diff comments   View file @ c91d0c7
... ... @@ -19,6 +19,7 @@
19 19 #define CONFIG_SYS_NO_FLASH
20 20  
21 21 #define CONFIG_ZYNQ_SDHCI0
  22 +#define CONFIG_DEFAULT_DEVICE_TREE zynq-microzed
22 23  
23 24 #include <configs/zynq-common.h>
24 25  
include/configs/zynq_zc70x.h
Diff comments   View file @ c91d0c7
... ... @@ -22,6 +22,7 @@
22 22 #define CONFIG_ZYNQ_I2C0
23 23 #define CONFIG_ZYNQ_EEPROM
24 24 #define CONFIG_ZYNQ_BOOT_FREEBSD
  25 +#define CONFIG_DEFAULT_DEVICE_TREE zynq-zc702
25 26  
26 27 #include <configs/zynq-common.h>
27 28  
include/configs/zynq_zc770.h
Diff comments   View file @ c91d0c7
... ... @@ -20,15 +20,18 @@
20 20 # define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
21 21 # define CONFIG_ZYNQ_SDHCI0
22 22 # define CONFIG_ZYNQ_SPI
  23 +# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm010
23 24  
24 25 #elif defined(CONFIG_ZC770_XM012)
25 26 # define CONFIG_ZYNQ_SERIAL_UART1
26 27 # undef CONFIG_SYS_NO_FLASH
  28 +# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm012
27 29  
28 30 #elif defined(CONFIG_ZC770_XM013)
29 31 # define CONFIG_ZYNQ_SERIAL_UART0
30 32 # define CONFIG_ZYNQ_GEM1
31 33 # define CONFIG_ZYNQ_GEM_PHY_ADDR1 7
  34 +# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm013
32 35  
33 36 #else
34 37 # define CONFIG_ZYNQ_SERIAL_UART0
include/configs/zynq_zed.h
Diff comments   View file @ c91d0c7
... ... @@ -20,6 +20,7 @@
20 20  
21 21 #define CONFIG_ZYNQ_SDHCI0
22 22 #define CONFIG_ZYNQ_BOOT_FREEBSD
  23 +#define CONFIG_DEFAULT_DEVICE_TREE zynq-zed
23 24  
24 25 #include <configs/zynq-common.h>
25 26