sunxi: Add support for gt90h-v4 tablets

The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot. The pmic setup on this board is somewhat special, dcdc2 MUST be set to 1.1V instead of the usual 1.2V otherwise the board is very unstable. aldo1 is used to power the micro sd slot, dldo1 is used for wifi. This commit adds a defconfig + dts (as submitted to the kernel) for the gt90h-v4 pcb. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>

sunxi: Add support for gt90h-v4 tablets
The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot. The pmic setup on this board is somewhat special, dcdc2 MUST be set to 1.1V instead of the usual 1.2V otherwise the board is very unstable. aldo1 is used to power the micro sd slot, dldo1 is used for wifi. This commit adds a defconfig + dts (as submitted to the kernel) for the gt90h-v4 pcb. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede
1 parent 7a0bbe64d8
Showing 4 changed files with 173 additions and 0 deletions Side-by-side Diff
arch/arm/dts/Makefile
arch/arm/dts/sun8i-a23-gt90h-v4.dts
board/sunxi/MAINTAINERS
configs/gt90h_v4_defconfig
@@ -134,6 +134,7 @@
 	sun7i-a20-yones-toptech-bd1078.dtb
 dtb-$(CONFIG_MACH_SUN8I_A23) += \
 	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
 	sun8i-a23-ippo-q8h-v5.dtb \
 	sun8i-a23-ippo-q8h-v1.2.dtb
 dtb-$(CONFIG_MACH_SUN8I_A33) += \
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Allwinner GT90H Quad Core Tablet (v4)";
+	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button@600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
+	/* FIXME this really is aldo1, correct once we've pmic support */
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
@@ -40,6 +40,7 @@
 F:	configs/Wits_Pro_A20_DKT_defconfig
 F:	include/configs/sun8i.h
 F:	configs/ga10h_v1_1_defconfig
+F:	configs/gt90h_v4_defconfig
 F:	configs/Ippo_q8h_v1_2_defconfig
 F:	configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
 F:	include/configs/sun9i.h
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A23=y
+CONFIG_DRAM_CLK=480
+CONFIG_DRAM_ZQ=32767
+CONFIG_MMC0_CD_PIN="PB4"
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
+CONFIG_AXP_GPIO=y
+CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:55000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_POWER="PH7"
+CONFIG_VIDEO_LCD_BL_EN="PH6"
+CONFIG_VIDEO_LCD_BL_PWM="PH0"
+CONFIG_USB_MUSB_HOST=y
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-gt90h-v4"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_AXP221_DCDC2_VOLT=1100
+CONFIG_AXP221_DLDO1_VOLT=3300
+CONFIG_AXP221_ALDO1_VOLT=3000
...	...	@@ -134,6 +134,7 @@
134	134	sun7i-a20-yones-toptech-bd1078.dtb
135	135	dtb-$(CONFIG_MACH_SUN8I_A23) += \
136	136	sun8i-a23-evb.dtb \
	137	+ sun8i-a23-gt90h-v4.dtb \
137	138	sun8i-a23-ippo-q8h-v5.dtb \
138	139	sun8i-a23-ippo-q8h-v1.2.dtb
139	140	dtb-$(CONFIG_MACH_SUN8I_A33) += \
	1	+/*
	2	+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
	3	+ *
	4	+ * This file is dual-licensed: you can use it either under the terms
	5	+ * of the GPL or the X11 license, at your option. Note that this dual
	6	+ * licensing only applies to this file, and not this project as a
	7	+ * whole.
	8	+ *
	9	+ * a) This file is free software; you can redistribute it and/or
	10	+ * modify it under the terms of the GNU General Public License as
	11	+ * published by the Free Software Foundation; either version 2 of the
	12	+ * License, or (at your option) any later version.
	13	+ *
	14	+ * This file is distributed in the hope that it will be useful,
	15	+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	+ * GNU General Public License for more details.
	18	+ *
	19	+ * Or, alternatively,
	20	+ *
	21	+ * b) Permission is hereby granted, free of charge, to any person
	22	+ * obtaining a copy of this software and associated documentation
	23	+ * files (the "Software"), to deal in the Software without
	24	+ * restriction, including without limitation the rights to use,
	25	+ * copy, modify, merge, publish, distribute, sublicense, and/or
	26	+ * sell copies of the Software, and to permit persons to whom the
	27	+ * Software is furnished to do so, subject to the following
	28	+ * conditions:
	29	+ *
	30	+ * The above copyright notice and this permission notice shall be
	31	+ * included in all copies or substantial portions of the Software.
	32	+ *
	33	+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	34	+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	35	+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	36	+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	37	+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	38	+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	39	+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	40	+ * OTHER DEALINGS IN THE SOFTWARE.
	41	+ */
	42	+
	43	+/dts-v1/;
	44	+#include "sun8i-a23.dtsi"
	45	+#include "sunxi-common-regulators.dtsi"
	46	+
	47	+#include <dt-bindings/gpio/gpio.h>
	48	+#include <dt-bindings/input/input.h>
	49	+#include <dt-bindings/pinctrl/sun4i-a10.h>
	50	+
	51	+/ {
	52	+ model = "Allwinner GT90H Quad Core Tablet (v4)";
	53	+ compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33";
	54	+
	55	+ aliases {
	56	+ serial0 = &r_uart;
	57	+ };
	58	+
	59	+ chosen {
	60	+ stdout-path = "serial0:115200n8";
	61	+ };
	62	+};
	63	+
	64	+&ehci0 {
	65	+ status = "okay";
	66	+};
	67	+
	68	+&i2c0 {
	69	+ pinctrl-names = "default";
	70	+ pinctrl-0 = <&i2c0_pins_a>;
	71	+ status = "okay";
	72	+};
	73	+
	74	+&i2c1 {
	75	+ pinctrl-names = "default";
	76	+ pinctrl-0 = <&i2c1_pins_a>;
	77	+ status = "okay";
	78	+};
	79	+
	80	+&lradc {
	81	+ vref-supply = <&reg_vcc3v0>;
	82	+ status = "okay";
	83	+
	84	+ button@200 {
	85	+ label = "Volume Up";
	86	+ linux,code = <KEY_VOLUMEUP>;
	87	+ channel = <0>;
	88	+ voltage = <200000>;
	89	+ };
	90	+
	91	+ button@400 {
	92	+ label = "Volume Down";
	93	+ linux,code = <KEY_VOLUMEDOWN>;
	94	+ channel = <0>;
	95	+ voltage = <400000>;
	96	+ };
	97	+
	98	+ button@600 {
	99	+ label = "Back";
	100	+ linux,code = <KEY_BACK>;
	101	+ channel = <0>;
	102	+ voltage = <600000>;
	103	+ };
	104	+};
	105	+
	106	+&mmc0 {
	107	+ pinctrl-names = "default";
	108	+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
	109	+ /* FIXME this really is aldo1, correct once we've pmic support */
	110	+ vmmc-supply = <&reg_vcc3v0>;
	111	+ bus-width = <4>;
	112	+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
	113	+ cd-inverted;
	114	+ status = "okay";
	115	+};
	116	+
	117	+&pio {
	118	+ mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
	119	+ allwinner,pins = "PB4";
	120	+ allwinner,function = "gpio_in";
	121	+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	122	+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
	123	+ };
	124	+};
	125	+
	126	+&r_uart {
	127	+ pinctrl-names = "default";
	128	+ pinctrl-0 = <&r_uart_pins_a>;
	129	+ status = "okay";
	130	+};
	131	+
	132	+/*
	133	+ * FIXME for now we only support host mode and rely on u-boot to have
	134	+ * turned on Vbus which is controlled by the axp223 pmic on the board.
	135	+ *
	136	+ * Once we have axp223 support we should switch to fully supporting otg.
	137	+ */
	138	+&usb_otg {
	139	+ dr_mode = "host";
	140	+ status = "okay";
	141	+};
	142	+
	143	+&usbphy {
	144	+ status = "okay";
	145	+};
...	...	@@ -40,6 +40,7 @@
40	40	F: configs/Wits_Pro_A20_DKT_defconfig
41	41	F: include/configs/sun8i.h
42	42	F: configs/ga10h_v1_1_defconfig
	43	+F: configs/gt90h_v4_defconfig
43	44	F: configs/Ippo_q8h_v1_2_defconfig
44	45	F: configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
45	46	F: include/configs/sun9i.h
	1	+CONFIG_ARM=y
	2	+CONFIG_ARCH_SUNXI=y
	3	+CONFIG_MACH_SUN8I_A23=y
	4	+CONFIG_DRAM_CLK=480
	5	+CONFIG_DRAM_ZQ=32767
	6	+CONFIG_MMC0_CD_PIN="PB4"
	7	+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
	8	+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
	9	+CONFIG_USB0_ID_DET="PH8"
	10	+CONFIG_AXP_GPIO=y
	11	+CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:55000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
	12	+CONFIG_VIDEO_LCD_DCLK_PHASE=0
	13	+CONFIG_VIDEO_LCD_POWER="PH7"
	14	+CONFIG_VIDEO_LCD_BL_EN="PH6"
	15	+CONFIG_VIDEO_LCD_BL_PWM="PH0"
	16	+CONFIG_USB_MUSB_HOST=y
	17	+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-gt90h-v4"
	18	+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
	19	+CONFIG_SPL=y
	20	+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
	21	+# CONFIG_CMD_IMLS is not set
	22	+# CONFIG_CMD_FLASH is not set
	23	+# CONFIG_CMD_FPGA is not set
	24	+CONFIG_AXP221_DCDC2_VOLT=1100
	25	+CONFIG_AXP221_DLDO1_VOLT=3300
	26	+CONFIG_AXP221_ALDO1_VOLT=3000