Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

05 Dec, 2019

3 commits

22 Nov, 2019

1 commit

21 Nov, 2019

3 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 48f23dd6a   ARM: socfpga: Fix default mtdparts ... Browse Code »

    The default mtdparts value grew a trailing zero during the Kconfig
    conversion. This is because the mtdparts value in the header file
    had a \0 at the end, which got misconverted into plain 0 instead of
    being dropped.

    Signed-off-by: Marek Vasut
    Fixes: 43ede0bca7fc ("Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT")
    Reviewed-by: Tom Rini

    Marek Vasut
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

08 Nov, 2019

1 commit

25 Oct, 2019

1 commit

  • 832ce2027   mtd: spi: Clean up usage of CONFIG_SPI_FLASH_MTD ... Browse Code »

    Most boards currently use SPI_FLASH_MTD only in U-Boot proper, not in
    SPL. They often rely on hacks in the board header files to include
    this option conditionally. To be able to fix this, we previously
    introduced a separate option SPL_SPI_FLASH_MTD.

    Therefore we can now adjust the Makefile and change the code in
    sf_probe.c and sf_internal.h to use CONFIG_IS_ENABLED(SPI_FLASH_MTD).

    We also need to move all occurences of CONFIG_SPI_FLASH_MTD from the
    header files to the according defconfigs. The affected boards are
    socfpga, aristainetos, cm_fx6, display5, ventana, rcar-gen2, dh_imx6
    and da850evm.

    We do this all in one patch to guarantee bisectibility.

    This change was tested with buildman to make sure it does not
    introduce any regressions by comparing the resulting binary sizes.

    Signed-off-by: Frieder Schrempf
    Reviewed-by: Stefan Roese
    Reviewed-by: Simon Goldschmidt
    Acked-by: Lukasz Majewski
    Reviewed-by: Heiko Schocher
    Reviewed-by: Jagan Teki

    Frieder Schrempf
     

07 Oct, 2019

1 commit

23 Sep, 2019

1 commit

26 Aug, 2019

1 commit

15 May, 2019

1 commit

  • 990ed4452   arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board ... Browse Code »

    Re-add support for Aries Embedded MCV SoM, which is CycloneV based
    and the associated MCVEVK and MCVEVP baseboard. The board can boot
    from eMMC. Ethernet and USB is supported.

    The Aries Embedded boards have been removed with commit 03b54997d568
    ("board/aries: Remove"). I will now take care of them.

    The device-tree files are from mainline Linux commit e93c9c99a629
    ("Linux v5.1)".

    Signed-off-by: Wolfgang Grandegger
    CC: Marek Vasut
    CC: Simon Goldschmidt

    Wolfgang Grandegger
     

03 Jul, 2018

1 commit

  • 03b54997d   board/aries: Remove ... Browse Code »
    12

    The various Aries Embedded boards have been orphaned for a year and no
    one has come forward to take care of them. Remove.

    Signed-off-by: Tom Rini

    Tom Rini
     

04 Jun, 2018

1 commit

28 Apr, 2018

2 commits

  • 37dc72f5a   configs: Resync with savedefconfig ... Browse Code »

    Rsync all defconfig files using moveconfig.py

    Signed-off-by: Tom Rini

    Tom Rini
     
  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

17 Apr, 2018

3 commits

12 Apr, 2018

1 commit

09 Apr, 2018

1 commit

08 Apr, 2018

1 commit

23 Feb, 2018

1 commit

11 Feb, 2018

2 commits

25 Jan, 2018

1 commit

  • 1c7fa7931   arm: socfpga: allow configs without network support ... Browse Code »

    Currently, socfpga_common.h does not allow configurations without
    network support. This is because CONFIG_CMD_PXE is defined in this
    file and distro mode has DHCP hard-coded as available.

    Fix this by moving CONFIG_CMD_PXE and CONFIG_MENU to the defconfigs
    and by making DHCP optional in BOOT_TARGET_DEVICES(func).

    Signed-off-by: Simon Goldschmidt

    Simon Goldschmidt
     

09 Jan, 2018

1 commit

06 Nov, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

04 Oct, 2017

1 commit

  • a95aee6af   usb: gadget: Make g_dnl USB settings common ... Browse Code »

    The g_dnl USB settings for the vendor ID, product ID and manufacturer are
    actually common settings that can and should be shared by all the gadgets.

    Make them common by renaming them, and convert all the users.

    Reviewed-by: Simon Glass
    Reviewed-by: Lukasz Majewski
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

28 Aug, 2017

1 commit

15 Aug, 2017

2 commits

09 Aug, 2017

1 commit

26 Jul, 2017

2 commits

  • fa23ba1aa   kconfig: Convert FPGA_SOCFPGA configuration to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_FPGA_SOCFPGA

    Signed-off-by: Tien Fong Chee
    Reviewed-by: Ley Foon Tan
    Reviewed-by: Dinh Nguyen

    Tien Fong Chee
     
  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

11 Jul, 2017

1 commit

14 Apr, 2017

1 commit