24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
19 Oct, 2017
1 commit
-
Adjust VGA rom address to 0xfffb0000 so that u-boot.rom image
can be built again.Signed-off-by: Bin Meng
Reviewed-by: Stefan Roese
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
24 Aug, 2017
1 commit
-
Let's imply the 'pci' command to access the de facto interconnect
bus in an x86 system.Signed-off-by: Bin Meng
Reviewed-by: Stefan Roese
15 Aug, 2017
2 commits
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
-
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.Signed-off-by: Sam Protsenko
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini
12 Aug, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_PCISigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
01 Aug, 2017
13 commits
-
Like other peripheral drivers, move USB related drivers to platform
Kconfig as well.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
Only a specific type of SPI flash exists on a board, having board
Kconfig to select the SPI flash seems to make more sense. Other
flash types are not necessary except coreboot, which implies all
available flash drivers there.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
BayTrail integrates lots of peripherals that have U-Boot drivers.
Imply those in the platform Kconfig.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
Now that all x86 boards have been converted to use DM, we can imply
these uclass drivers (DM_ETH, DM_RTC, DM_USB, DM_VIDEO) from the
top level.Previously DM_GPIO, DM_KEYBOARD, DM_SERIAL, DM_SPI, DM_SPI_FLASH
are selected. Change to use 'imply' to allow them to be removed.Note with this change, chromebook_link64 build fails:
common/built-in.o:(.data.env_htab+0xc): undefined reference to 'env_flags_validate'
lib/built-in.o: In function `hsearch_r':
lib/hashtable.c:380: undefined reference to 'env_callback_init'
lib/hashtable.c:382: undefined reference to 'env_flags_init'
make[1]: *** [spl/u-boot-spl] Error 1CONFIG_SPL_ENV_SUPPORT is required for chromebook_link64 to build
again. This is just a workaround as it is not needed at all. See
commit bda40d5 "x86: qemu: Add a config for 64-bit U-Boot" for
the same issue seen on QEMU 64-bit target.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
This is a must have for all x86 boards.
Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
Platform knows whether MRC cache is implemented, but using it can
be a choice of a specific board.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
arch_misc_init() is intended to do architecture-dependent stuff.
This is required by each platform.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
CONFIG_BOARD_EARLY_INIT_F literally indicates board-specific codes
and should be not 'default y' for all x86 boards.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
Intel Management Engine is required by the platform, however it's
not a must have when building a U-Boot image. For example, during
development normally programming ME firmware is a one-time effort.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
PCI is the de facto interconnect bus in an x86 system.
Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
x86 is using the built-in libgcc implementation and this cannot be
turned off.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
Without a timer, U-Boot just doesn't boot. This is not something
we can turn off.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
30 Jul, 2017
1 commit
-
Kbuild complains if USB is not selected before any of host driver.
warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)
warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)Select it for X86.
Fixes: 64d6ac5bc4a9 ("Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig")
Signed-off-by: Andy Shevchenko
[bmeng: Update all x86 boards' defconfig files to remove CONFIG_USB]
Signed-off-by: Bin Meng
29 Jul, 2017
1 commit
-
BayTrail SoC supports both EHCI and xHCI controllers. However only
one host controller (either EHCI or xHCI) can be used. To enable
HSIC and SS ports, xHCI must be used. This turns on xHCI support on
Intel MinnowMax board.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass
Reviewed-by: Stefan Roese
Tested-by: Stefan Roese
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_SPI_FLASHSigned-off-by: Simon Glass
12 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_SCSISigned-off-by: Simon Glass
Reviewed-by: Bin Meng
19 Jun, 2017
1 commit
-
Signed-off-by: Tom Rini
17 May, 2017
1 commit
-
This turns on ACPI S3 resume for minnowmax board.
Signed-off-by: Bin Meng
Reviewed-by: Simon Glass
Tested-by: Stefan Roese
21 Mar, 2017
1 commit
-
We don't want pci_mmc to compile every time x86 compiles, only when
there's a platform that needs it. For that reason, we're adding a new
CONFIG_MMC_PCI which platforms can choose to enable.Suggested-by: Jaehoon Chung
Reviewed-by: Bin Meng
Signed-off-by: Felipe Balbi
Signed-off-by: Andy Shevchenko
28 Jan, 2017
4 commits
-
We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
Signed-off-by: Tom Rini -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
26 Jan, 2017
3 commits
-
This converts the following to Kconfig:
CONFIG_ARCH_MISC_INITSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_ARCH_EARLY_INIT_RSigned-off-by: Simon Glass
30 Dec, 2016
4 commits
-
While I moved the options, I also renamed them so that they are all
prefixed with MMC_SDHCI_.This commit was created in the following steps.
[1] Rename with the following command
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_MMC_SDMA/CONFIG_MMC_SDHCI_SDMA/g
s/CONFIG_BCM2835_SDHCI/CONFIG_MMC_SDHCI_BCM2835/g
s/CONFIG_KONA_SDHCI/CONFIG_MMC_SDHCI_KONA/g
s/CONFIG_MV_SDHCI/CONFIG_MMC_SDHCI_MV/g
s/CONFIG_S5P_SDHCI/CONFIG_MMC_SDHCI_S5P/g
s/CONFIG_SPEAR_SDHCI/CONFIG_MMC_SDHCI_SPEAR/g
'[2] create the Kconfig entries in drivers/mmc/Kconfig
[3] Move the options by the following command
tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \
MMC_SDHCI_KONA MMC_SDHCI_MV MMC_SDHCI_S5P MMC_SDHCI_SPEAR[4] Sort drivers/mmc/Makefile for readability
Signed-off-by: Masahiro Yamada
Reviewed-by: Tom Rini
Reviewed-by: Jaehoon Chung -
Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI.
My motivation for the rename is, ultimately, to make all the MMC
options prefixed with MMC_ and SDHCI options with MMC_SDHCI_,
like Linux.This commit was created as follows:
[1] Rename the config option with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g'[2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig
[3] run "tools/moveconfig.py -y MMC_SDHCI"
[4] add "depends on MMC_SDHCI" to existing SDHCI driver entries
Signed-off-by: Masahiro Yamada
Reviewed-by: Tom Rini
Reviewed-by: Jaehoon Chung -
Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
a Kconfig entry for this option without any actual moves, then
commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
instances only for SUNXI.We generally do not like such partial moves. This kind of work
is automated by tools/moveconfig.py, so it is pretty easy to
complete this move.I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
This shortens the configs and will ease new board porting.This commit was created as follows:
[1] Edit Kconfig (remove the "depends on", add the "default",
copy the prompt and help message from Linux)[2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'
Signed-off-by: Masahiro Yamada
Reviewed-by: Jaehoon Chung -
Generated by "tools/moveconfig -s".
This will make config moves easier.
Signed-off-by: Masahiro Yamada
24 Oct, 2016
1 commit
-
This converts the following to Kconfig:
CONFIG_USB_KEYBOARDSigned-off-by: Simon Glass
[trini: Fixup MPC86* configs]
Signed-off-by: Tom Rini