Eric Lee / smarc-uboot

29 Feb, 2020

1 commit

23 Jan, 2020

1 commit

05 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

13 Nov, 2019

1 commit

05 Oct, 2019

1 commit

26 Aug, 2019

1 commit

14 Aug, 2019

1 commit

02 Aug, 2019

1 commit

  • 37304aaf6   Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig ... Browse Code »
    4

    This converts the following to Kconfig:
    CONFIG_USE_PREBOOT
    CONFIG_PREBOOT

    Both are together in one commit, since otherwise the former causes kconfig
    to define the latter, which gives duplicate symbol errors.

    Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
    backslash lands in the wrong place. Similarly with socfpga_vining_fpga.

    Signed-off-by: Simon Glass

    Simon Glass
     

09 Jul, 2019

1 commit

  • a9221f3eb   at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs ... Browse Code »
    12

    Enable the extended ENV options for AT91 and OMAP2PLUS in order to be
    able to use CONFIG_ENV_UBI_* on these architectures.

    As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE,
    ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to
    KConfig.

    This migration was run using an extended moveconfig.py which evaluates
    expressions such as "(512 << 10)". See patch ("moveconfig: expand
    simple expressions").

    All modified boards were built with SOURCE_DATE_EPOCH=0 before and
    after the change and successfully confirmed that the identical binary
    is generated (the only exception was igep00x0, which does not define
    CONFIG_ENV_IS_IN_UBI in the original board header. Once that is
    defined, the test passes too).

    hs: rebased patch to:
    68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT"

    Signed-off-by: Markus Klotzbuecher
    Cc: Heiko Schocher
    Cc: Eugen Hristev
    Cc: Tom Rini

    Markus Klotzbuecher
     

30 Apr, 2019

1 commit

19 Feb, 2019

1 commit

  • eaba7df70   board/BuR/brxre1: convert do DM ... Browse Code »

    This commit converts the brxre1 board to DM,
    for this we have todo following things:

    - add a devicetree-file for this board
    - drop all obsolete settings from board header-file
    - use dm_i2c_xxx calls for read/write to the resetcontroller
    - request gpios before operate them

    Serues-cc: trini@konsulko.com
    Signed-off-by: Hannes Schmelzer

    Hannes Schmelzer
     

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

04 Jun, 2018

1 commit

17 Apr, 2018

1 commit

09 Apr, 2018

1 commit

08 Apr, 2018

1 commit

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

23 Jan, 2018

1 commit

21 Oct, 2017

1 commit

  • 0a9ef4515   Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_NAND_MXC
    CONFIG_NAND_OMAP_GPMC
    CONFIG_NAND_OMAP_GPMC_PREFETCH
    CONFIG_NAND_OMAP_ELM
    CONFIG_SPL_NAND_AM33XX_BCH
    CONFIG_SPL_NAND_SIMPLE
    CONFIG_SYS_NAND_BUSWIDTH_16BIT

    Signed-off-by: Adam Ford
    Reviewed-by: Heiko Schocher
    [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues,
    add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

08 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

19 Jun, 2017

1 commit

10 Jun, 2017

1 commit

  • f2d78c1ce   am33xx: Finish migration of CONFIG_AM33XX/AM43XX ... Browse Code »

    Almost all users of CONFIG_AM33XX/AM43XX have been migrated. Finish
    moving the last few over to Kconfig, and put all of the boards under the
    appropriate Kconfig chocie now. This board choice is non-optional, so
    remove that keyword on am33xx.

    Signed-off-by: Tom Rini

    Tom Rini
     

04 Jun, 2017

1 commit

  • 91d27a17c   Kconfig: Migrate FS_FAT / FAT_WRITE ... Browse Code »

    Now that these symbols are in Kconfig, migrate all users. Use imply on
    a number of platforms that default to having this enabled. As part of
    this we must migrate some straglers for CMD_FAT and DOS_PARTITION.

    Signed-off-by: Tom Rini

    Tom Rini
     

01 May, 2017

1 commit

30 Apr, 2017

1 commit

28 Apr, 2017

1 commit

14 Mar, 2017

1 commit

09 Feb, 2017

1 commit

  • e9d33e732   cmd: move CONFIG_CMD_UNZIP and CONFIG_CMD_ZIP to Kconfig ... Browse Code »

    CONFIG_CMD_ZIP is not defined by any board. I am moving
    CONFIG_CMD_UNZIP to defconfig files except UniPhier SoC family.

    I am the maintainer of UniPhier platform, so I know "select CMD_UNZIP"
    is better for this platform.

    Signed-off-by: Masahiro Yamada
    Acked-by: Michal Simek
    Acked-by: Stefan Roese
    Acked-by: Ryan Harkin
    Tested-by: Ryan Harkin

    Masahiro Yamada
     

26 Jan, 2017

1 commit

24 Jan, 2017

1 commit

22 Jan, 2017

1 commit

11 Jan, 2017

1 commit

  • 1d2c0506d   mmc: move more driver config options to Kconfig ... Browse Code »

    Move (and rename) the following CONFIG options to Kconfig:

    CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI)
    CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS)
    CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC)
    CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS)
    CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA)
    CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI)

    They are the same option names as used in Linux.

    This commit was created as follows:

    [1] Rename the options with the following command:

    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e '
    s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g
    s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g
    s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g
    s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g
    s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g
    s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g
    '

    [2] Commit the changes

    [3] Create entries in driver/mmc/Kconfig.
    (copied from Linux)

    [4] Move the options with the following command
    tools/moveconfig.py -y -r HEAD \
    MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI

    [5] Sort and align drivers/mmc/Makefile for readability

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Marek Vasut

    Masahiro Yamada