Eric Lee / smarc-uboot

07 Feb, 2020

1 commit

  • 8a6ffeda9   video: enable VIDEO_ANSI and all VIDEO_BBP options ... Browse Code »

    This partially reverts changes by commit 2cc393f32fd9
    ("video: make BPP and ANSI configs optional") since it
    caused issues with other boards (missing LCD console
    output on pinebook, x86 platform or sandbox). Enable
    all disabled options again and opt out of not supported
    color depth in board defconfigs.

    Signed-off-by: Anatolij Gustschin
    Reported-by: Vagrant Cascadian

    Anatolij Gustschin
     

06 Dec, 2019

1 commit

  • 2cc393f32   video: make BPP and ANSI configs optional ... Browse Code »
    12

    Many boards do not use all selected framebuffer depth
    configurations, for such boards there is some unused
    code in video and console uclass routines. Make depth
    specific code optional to avoid dead code and slightly
    reduce binary size. Also make ANSI code optional for
    the same reason. When i.e. using only VIDEO_BPP16 the
    code size shrinks (below values when using gcc-7.3.0):

    $ ./tools/buildman/buildman -b video-wip -sS wandboard
    ...
    01: Merge git://git.denx.de/u-boot-sh
    02: video: add guards around 16bpp/32bbp code
    03: video: make BPP and ANSI configs optional
    arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0

    Signed-off-by: Anatolij Gustschin
    Tested-by: Eugen Hristev
    Tested-by: Patrice Chotard
    Tested-by: Steffen Dirkwinkel

    Anatolij Gustschin
     

05 Dec, 2019

3 commits

04 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

23 Sep, 2019

1 commit

10 Aug, 2019

1 commit

  • f028c9f43   colibri/apalis tegra: drop DFU support ... Browse Code »

    We never really added a sensible DFU configuration for platforms
    based on eMMC. Most of the things one might want to do can also be done
    with UMS or fastboot, so drop the DFU configuration.

    Signed-off-by: Igor Opaniuk
    Reviewed-by: Philippe Schenker
    Signed-off-by: Tom Warren

    Igor Opaniuk
     

21 Jun, 2019

1 commit

15 Jun, 2019

2 commits

12 Jun, 2019

1 commit

  • 529faf80c   Merge tag 'u-boot-imx-20190612' of git://git.denx.de/u-boot-imx ... Browse Code »

    u-boot-imx-20190612
    --------------------

    - Board fixes:
    - imx6logic
    - wandboard
    - mx6sabre boots again
    - imx8qm_mek
    - pico-* boards
    - Toradex apalis / colibri
    - engicam imx6 (environment)
    - KP MX53
    - opos6ul
    - Switch to DM:
    - vining2000
    - dh MX6
    - Toradex colibri i.MX7
    - Novena
    - Security : fix CSF size for HAB
    - Other:
    - imx: fix building for i.mx8 without spl
    - pcie and switch to DM

    mx6sabreauto: Enable SPL SDP support

    Tom Rini
     

11 Jun, 2019

1 commit

  • cd7e76ffb   toradex apalis/colibri: extend CONFIG_SYS_MALLOC_F_LEN ... Browse Code »

    Extend size of the malloc() pool for use before relocation, from 0x400
    (default one) to 0x2000 (CONFIG_SYS_MALLOC_F_LEN=0x2000),
    as adding of DM_FLAG_PRE_RELOC flag to simple-bus driver introduced a
    regression on multiple boards, because of more intensive usage of malloc()
    pool and therefore a broken boot as the size of pool isn't sufficient.

    Fixes: 3a7c45f6a7 ("simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus")
    Signed-off-by: Igor Opaniuk
    Reviewed-by: Bin Meng

    Igor Opaniuk
     

05 Jun, 2019

1 commit

30 Apr, 2019

2 commits

22 Feb, 2019

1 commit

21 Feb, 2019

2 commits

  • 747fed56d   Kconfig: tegra: Migrate USB_EHCI_TEGRA ... Browse Code »

    Migrate USB_EHCI_TEGRA from headers to Kconfig

    Signed-off-by: Peter Robinson
    Cc: Tom Warren
    Cc: Stephen Warren
    Cc: Marek Vasut
    Cc: Marcel Ziswiler
    Cc: Peter.Chubb@data61.csiro.au
    Cc: Lucas Stach
    Cc: Stefan Agner
    Cc: Alban Bedel
    Cc: Allen Martin
    Signed-off-by: Tom Warren

    Peter Robinson
     
  • 02253d4d1   Kconfig: tegra: Migrate SYS_I2C_TEGRA ... Browse Code »

    Migrate SYS_I2C_TEGRA from headers to Kconfig

    Signed-off-by: Peter Robinson
    Cc: Tom Warren
    Cc: Stephen Warren
    Cc: Heiko Schocher
    Cc: Marcel Ziswiler
    Cc: Peter.Chubb@data61.csiro.au
    Cc: Lucas Stach
    Cc: Stefan Agner
    Cc: Alban Bedel
    Cc: Allen Martin
    Signed-off-by: Tom Warren

    Peter Robinson
     

08 Jan, 2019

1 commit

14 Nov, 2018

1 commit

  • cbabe7f87   configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS ... Browse Code »

    Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
    that had been enabling it turn it on by hand. This exposed that we had
    not yet migrated CMD_MTDPARTS fully, so do so now.

    Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()")
    Signed-off-by: Tom Rini

    Tom Rini
     

04 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 May, 2018

1 commit

17 Apr, 2018

1 commit

  • 4f67b93fb   part: Disable CONFIG_SPL_ISO_PARTITION by default ... Browse Code »

    We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot
    could load distro images that usually get shipped as iso images. These images
    usually come with a board agnostic boot environment.

    However, there is very little point in having ISO support enabled (for anyone
    really) in SPL, as the whole idea of SPL is to load U-Boot proper which again
    is board specific. So the fact that we enable ISO support in U-Boot proper does
    not mean at all that we want ISO support in U-Boot SPL.

    Hence, let's remove the Kconfig dependency. Along the way, let's also clean up
    all those default configs that disabled SPL ISO support.

    Signed-off-by: Alexander Graf

    Alexander Graf
     

09 Apr, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

06 Nov, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

04 Oct, 2017

1 commit

  • a95aee6af   usb: gadget: Make g_dnl USB settings common ... Browse Code »

    The g_dnl USB settings for the vendor ID, product ID and manufacturer are
    actually common settings that can and should be shared by all the gadgets.

    Make them common by renaming them, and convert all the users.

    Reviewed-by: Simon Glass
    Reviewed-by: Lukasz Majewski
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

08 Sep, 2017

2 commits

28 Aug, 2017

1 commit

16 Aug, 2017

1 commit

15 Aug, 2017

1 commit

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass