07 May, 2018
1 commit
-
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.Signed-off-by: Tom Rini
29 Dec, 2017
1 commit
-
Secure boot is not enabled in warp imximage.cfg, add support for it.
Signed-off-by: Breno Lima
Reviewed-by: Fabio Estevam
12 Jul, 2017
2 commits
-
Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/.This change is also coherent with the structure in kernel.
Signed-off-by: Stefano Babic
CC: Fabio Estevam
CC: Akshay Bhat
CC: Ken Lin
CC: Marek Vasut
CC: Heiko Schocher
CC: "Sébastien Szymanski"
CC: Christian Gmeiner
CC: Stefan Roese
CC: Patrick Bruenn
CC: Troy Kisky
CC: Nikita Kiryanov
CC: Otavio Salvador
CC: "Eric Bénard"
CC: Jagan Teki
CC: Ye Li
CC: Peng Fan
CC: Adrian Alonso
CC: Alison Wang
CC: Tim Harvey
CC: Martin Donnelly
CC: Marcin Niestroj
CC: Lukasz Majewski
CC: Adam Ford
CC: "Albert ARIBAUD (3ADEV)"
CC: Boris Brezillon
CC: Soeren Moch
CC: Richard Hu
CC: Wig Cheng
CC: Vanessa Maegima
CC: Max Krummenacher
CC: Stefan Agner
CC: Markus Niebel
CC: Breno Lima
CC: Francesco Montefoschi
CC: Jaehoon Chung
CC: Scott Wood
CC: Joe Hershberger
CC: Anatolij Gustschin
CC: Simon Glass
CC: "Andrew F. Davis"
CC: "Łukasz Majewski"
CC: Patrice Chotard
CC: Nobuhiro Iwamatsu
CC: Hans de Goede
CC: Masahiro Yamada
CC: Stephen Warren
CC: Andre Przywara
CC: "Álvaro Fernández Rojas"
CC: York Sun
CC: Xiaoliang Yang
CC: Chen-Yu Tsai
CC: George McCollister
CC: Sven Ebenfeld
CC: Filip Brozovic
CC: Petr Kulhavy
CC: Eric Nelson
CC: Bai Ping
CC: Anson Huang
CC: Sanchayan Maity
CC: Lokesh Vutla
CC: Patrick Delaunay
CC: Gary Bisson
CC: Alexander Graf
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam
Reviewed-by: Christian Gmeiner -
CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT is not the correct method
to set I/O to 1.8. To boards that does not support vqmmc-supply,
use vs18_enable in fsl_esdhc_cfg. If regulator is supported,
use fixed 1.8V regulator for vqmmc-supply.Signed-off-by: Peng Fan
Cc: Jaehoon Chung
Cc: York Sun
Cc: Stefano Babic
26 Oct, 2016
1 commit
-
Fixed typo for doc/README.imximage on respective imximage.cfg files.
Cc: Tom Rini
Cc: Stefano Babic
Cc: Fabio Estevam
Acked-by: Peng Fan
Signed-off-by: Jagan Teki
07 Sep, 2016
1 commit
-
Since commit a13d3757f7df ("warp: Use imx_ddr_size() for calculating the
DDR size") warp board no longer boots.The reason for the breakage is that the warp board is using the DDR
configuration from mx6slevk. A fundamental difference between warp and
mx6slevk is that warp only uses one DDR chip select while mx6slevk uses two.The imx_ddr() function calculates the RAM size in runtime by reading the
values of registers MDCTL and MDMISC.So in order to fix this warp boot issue, create a imximage DDR file specific
to warp, where the MDCTL register is configured to only activates a single
chip select.Reported-by: Breno Lima
Signed-off-by: Fabio Estevam
Tested-by: Breno Lima
28 Jul, 2016
1 commit
-
imx_ddr_size() can be used to calculate the DDR size in runtime.
By using this function we no longer need to define PHYS_SDRAM_SIZE.
Signed-off-by: Fabio Estevam
06 Feb, 2016
1 commit
-
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).Signed-off-by: Bin Meng
Reviewed-by: Heiko Schocher
Reviewed-by: Simon Glass
Reviewed-by: Minkyu Kang
13 Sep, 2015
1 commit
-
Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Heiko Schocher
Cc: Christian Gmeiner
Cc: Stefan Roese
Cc: Troy Kisky
Cc: Nikita Kiryanov
Cc: "Eric Bénard"
Cc: Fabio Estevam
Cc: Tim Harvey
Cc: Marek Vasut
Cc: Markus Niebel
Cc: Otavio Salvador
Acked-by: Stefan Roese
Acked-by: Marek Vasut
Acked-by: Christian Gmeiner
Acked-by: Markus Niebel
Acked-by: Troy Kisky
Acked-by: Igor Grinberg
26 Jul, 2015
1 commit
-
Warp has a MAX77696 PMIC connected via I2C1 bus.
Add support for it.
Signed-off-by: Fabio Estevam
28 May, 2015
1 commit
-
After the mx6 config consolidation, 'save' command is no longer
recognized.Pass the full command name 'saveenv' instead.
Signed-off-by: Fabio Estevam
16 May, 2015
1 commit
-
Fix the spelling of 'successful'.
Signed-off-by: Fabio Estevam
13 Mar, 2015
1 commit
-
Provide instructions on how to upgrade U-boot in the eMMC.
Signed-off-by: Fabio Estevam
Acked-by: Otavio Salvador
02 Mar, 2015
1 commit
-
With UMS support we are able to flash the eMMC from U-boot, which is very
convenient.Add UMS support to make the eMMC flashing process easier.
Signed-off-by: Fabio Estevam
Acked-by: Otavio Salvador
23 Feb, 2015
1 commit
-
The WaRP Board is a Wearable Reference Plaform. The board features:
- Freescale i.MX6 SoloLite processor with 512MB of RAM
- Freescale FXOS8700CQ 6-axis Xtrinsic sensor
- Freescale Kinetis KL16 MCU
- Freescale Xtrinsic MMA955xL intelligent motion sensing platformThe board implements a hybrid architecture to address the evolving
needs of the wearables market. The platform consists of a main board
and an example daughtercard with the ability to add additional
daughtercards for different usage models.For more information about the project, visit:
http://www.warpboard.org/
Signed-off-by: Otavio Salvador
Reviewed-by: Marek Vasut
Acked-by: Stefano Babic