16 Feb, 2016
20 commits
-
This provides runtime test coverage in Travis, in addition to the existing
build coverage.Signed-off-by: Stephen Warren
Reviewed-by: Roger Meier
Reviewed-by: Heiko Schocher
Acked-by: Simon Glass -
The code replaced pexpect with custom code long ago. Don't import the
unused module so it doesn't need to be installed.Signed-off-by: Stephen Warren
Acked-by: Simon Glass -
Add documentation describing the new --gdbserver feature, and some common
pytest options.Signed-off-by: Stephen Warren
Acked-by: Simon Glass -
Invoke each "ut"-based unit test as a separate pytest.
Now that the DM unit test runs under test/py, remove the manual shell
script that invokes it.Signed-off-by: Stephen Warren
Acked-by: Simon Glass
Tested-by: Simon Glass # v2, on sandbox -
This information may be useful for both debugging, and processes that want
to perform simple forms of introspection on the U-Boot binary, such as
determining the set of "ut" subtests that are compiled in.Signed-off-by: Stephen Warren
Acked-by: Simon Glass -
This is broken - we need to look at the first two characters to distinguish
'gpio status' from 'gpio set'.Fixes: 0ffe6ab5 (gpio: Allow 's' as an abbreviation for 'status')
Reported-by: Soeren Moch
Signed-off-by: Simon Glass
Tested-by: Soeren Moch
Reviewed-by: Bin Meng
Tested-by: Hannes Schmelzer -
$ make tools-all
...
In file included from tools/env/env_flags.c:1:0:
tools/env/../../common/env_flags.c: In function
‘env_flags_parse_varaccess_from_binflags’:
tools/env/../../common/env_flags.c:156:18: warning: implicit declaration
of function ‘ARRAY_SIZE’ [-Wimplicit-function-declaration]
for (i = 0; i < ARRAY_SIZE(env_flags_varaccess_mask); i++)
^
Seems like the other utilities just add a copy of ARRAY_SIZE since
there's nowhere to include it from (tools/imagetool.h,
tools/mxsimage.h). Let's do the same here.Signed-off-by: Lubomir Rintel
-
The kernel gets much too sad when the ramdisk is loaded too high into the 1GiB
of memory on Raspberry Pi 2:## Flattened Device Tree blob at 00000100
Booting using the fdt blob at 0x000100
Loading Ramdisk to 39c14000, end 3ab45067 ... OK
Using Device Tree in place at 00000100, end 000045ea
...
[ 0.599346] Unpacking initramfs...
[ 0.602924] Unable to handle kernel paging request at virtual address f9c14000Placement of the device tree was fixed in 89ca1000 (ARM: rpi: set fdt_high
in the default environment).Signed-off-by: Lubomir Rintel
Acked-by: Stephen Warren -
If BUILD_TAG is part of KBUILD_CFLAGS, then any time the value changes,
all files get rebuilt. In a continuous integration environment, the value
will change every build. This wastes time, assuming that incremental
builds would otherwise occur.To solve this, remove BUILD_TAG from KBUILD_CFLAGS and add it to CFLAGS
for just the one file that uses it. This does have the disadvantage that
if any other files want to use the flag, we'll need to duplicate this
custom CFLAGS setup logic. However, it seems unlikely we'll need this.An alternative would be to add BUILD_TAG to the "local version" and remove
the special case code from display_options.c. However, that would affect
the format of the U-Boot signon message, which may negatively affect
people looking for specific data there. The approach of using
file-specific CFLAGS was suggested by Masahiro Yamada.Signed-off-by: Stephen Warren
Reviewed-by: Tom Rini
Reviewed-by: Masahiro Yamada
Acked-by: Simon Glass -
With the recent addition of UBI support, this patch will add the preset
parameters to allow for mouting an UBIFS from the 'fs' partition in NAND.-V2: ubi.mtd=fs instead of ubi.mtd=4
Signed-off-by: Adam Ford
Reviewed-by: Tom Rini -
CONFIG_SF_DEFAULT_MODE is used to select default SPI mode when using
sf commands. Therefore fix am43xx to use CONFIG_SF_DEFAULT_MODE instead
of CONFIG_DEFAULT_SPI_MODE.Signed-off-by: Vignesh R
Reviewed-by: Tom Rini
Reviewed-by: Jagan Teki -
According to Data Manual(SPRS915P) of AM572x, TI QSPI controller on
DRA74 EVM(rev 1.1+) can support up to 64MHz in MODE-0, whereas MODE-3 is
limited to 48MHz. Hence, switch to MODE-0 for better throughput.
Also, add IODelay parameters for the same.Signed-off-by: Vignesh R
Reviewed-by: Tom Rini -
Signed-off-by: David Müller
-
Signed-off-by: David Müller
-
Signed-off-by: David Müller
-
Signed-off-by: David Müller
-
Fixes typo of pxe_addr_r with pxefile_addr_r.
Signed-off-by: Vagrant Cascadian
Reviewed-by: Stephen Warren -
I will take this over from Peter Barada, since I work with it daily
at Logic PD.Signed-off-by: Adam Ford
Acked-by: Peter Barada -
Based on the work done by Overo, this seems to help some compilers
that have a hard time fitting all the code into the allocated space.Signed-off-by: Adam Ford
Reviewed-by: Tom Rini -
Boot with the Linux zImage and am3517-evm.dtb pair, when SD/MMC media
is present. This behavior can be overridden by creating a 'uEnv.txt'
file with 'uenvcmd' defined.To boot an existing 'uImage', create the following 'uEnv.txt':
[start]-----------------------------------------------------------------
loaduimage=fatload mmc 0:1 ${loadaddr} ${bootfile}
uenvcmd=run loaduimage; run mmcargs; bootm ${loadaddr}[end]-------------------------------------------------------------------
Inspired by similar patches, for other OMAP3 boards, from EEWiki
- https://github.com/eewiki/u-boot-patches/tree/master/v2016.01Signed-off-by: Derald D. Woods
Reviewed-by: Tom Rini
14 Feb, 2016
20 commits
-
Initial commit for PH1-Pro4 Ace and Sanji boards.
Note:
There are two variants for the Ace board in terms of the amount of
DDR memory; 1GB or 2GB.Signed-off-by: Masahiro Yamada
-
This is used for on-board inter-connection.
Signed-off-by: Masahiro Yamada
-
This board has an EEPROM connected to the I2C channel 0 of the SoC.
Its slave address is 0x54.Signed-off-by: Masahiro Yamada
-
This environment define has been here to work around the LMB
allocation error introduced by commit 9c11135ce053 ("image: fix
getenv_bootm_size() function").It is no longer needed because the root cause was fixed by commit
0cb389dd1a38 ("image: fix getenv_bootm_size() function again").Signed-off-by: Masahiro Yamada
-
It turned out that DDR channel 2 was not working on ProXstream2
Vodka board. Add the missing ACBLDR0 register setting to adjust
the delay between the clock lines and the address/command lines.Signed-off-by: Masahiro Yamada
-
If CONFIG_CMD_DDRMPHY_DUMP is enabled, the build fails.
Fixes: 93d92d46cd01 ("ARM: uniphier: add dump command for DDR Multi PHY registers")
Signed-off-by: Masahiro Yamada -
The U-Boot proper building needs to descend arch/arm/mach-uniphier/dram
to build these commands.Fixes: 93d92d46cd01 ("ARM: uniphier: add dump command for DDR Multi PHY registers")
Signed-off-by: Masahiro Yamada -
This header is no longer used.
This is the last file in arch/arm/mach-uniphier/include/mach/.
At last, I've succeeded in eliminating the mach directory.Signed-off-by: Masahiro Yamada
-
These pin mux settings are cared by the pinctrl drivers.
Remove the ad-hoc code.Signed-off-by: Masahiro Yamada
-
Now, all this driver does can be covered by the generic EHCI driver
(drivers/usb/host/ehci-generic.c). UniPhier SoCs have switched to
use it. Delete this driver rather than bothering to convert it to
Driver Model.Signed-off-by: Masahiro Yamada
Acked-by: Marek Vasut -
The UniPhier EHCI driver (drivers/usb/host/ehci-uniphier.c) does
nothing special but set the base address and handle reset/clock.Since commit 4feefdcfe916 ("usb: add clock support for generic EHCI"),
the generic one (drivers/usb/host/ehci-generic.c) can do those, too.We no longer need to stick to the dedicated driver.
Signed-off-by: Masahiro Yamada
-
This allows the EHCI driver to get clocks from device tree.
Signed-off-by: Masahiro Yamada
-
This block provides clock and reset control for MIO (Media I/O)
hardware blocks such as USB2.0, SD card, eMMC, etc.Signed-off-by: Masahiro Yamada
-
This block provides clock and reset control for peripherals such as
UART, I2C, IC card, etc.Signed-off-by: Masahiro Yamada
-
These are mainly used for controlling clocks and resets.
Signed-off-by: Masahiro Yamada
-
Add master clock nodes generated by crystal oscillators.
PH1-sLD3, PH1-LD4: 24.576 MHz
PH1-Pro4, ProXstream2: 25.000 MHz
PH1-Pro5: 20.000 MHzSigned-off-by: Masahiro Yamada
-
This is the initial commit for the UniPhier clock drivers.
Currently, only the Media I/O clock is supported.Signed-off-by: Masahiro Yamada
-
The USB boot code is too fat and complicated to be included in SPL
(at least for now). So, it was implemented as a separate project
(what we call USB-loader).The expected boot sequence is as follows:
Boot ROM -> USB-loader -> SPL -> U-Boot proper
The USB-loader loads the SPL and U-Boot proper from a USB memory
onto the locked L2 cache. Then, SPL needs to copy the U-Boot proper
to DRAM, so this mode looks like a NOR boot from the view of SPL.
However, we want to distinguish between (genuine) NOR boot and USB
boot in some places.Signed-off-by: Masahiro Yamada
-
This function is for local use in the file.
Signed-off-by: Masahiro Yamada
