04 Sep, 2011
6 commits
-
Move the environment outside the u-boot for some boards
and enlarge the u-boot size in some env settings.Signed-off-by: Jason Jin
-
There is no network device on ColdFire 52277EVB board.But the default
cmd include NFS define which make the build error.Signed-off-by: Jason Jin
-
Signed-off-by: Jason Jin
-
Introduce the --gc-sections for ColdFire platform and clean up the
corresponding lds file.Signed-off-by: TsiChung Liew
Signed-off-by: Jason Jin -
Remove compiler version check for gcc 4.1 in config.mk.
Signed-off-by: TsiChung Liew
Signed-off-by: Jason Jin -
Some typoes in Makefile and boards.cfg make the M54455 board
and M53017 board configuration broken.Signed-off-by: Jason Jin
01 Sep, 2011
2 commits
-
Commit 7616e78 "Add Ethernet hardware MAC address framework to usbnet"
increased the code size and broke building for the ETX094 board.
Adjust the linker script to make it build again.While we are at it, remove unused u-boot.lds.debug
Signed-off-by: Wolfgang Denk
-
The PHY driver was too verbose and corrupted the boot message display
like this:...
Net: TSEC0 connected to Marvell 88E1111S
TSEC1 connected to Marvell 88E1111S
TSEC0, TSEC1
...Turn printf() into debug() so we het the expected output again:
...
Net: TSEC0, TSEC1
...Signed-off-by: Wolfgang Denk
Cc: Kumar Gala
26 Aug, 2011
2 commits
-
* 'master' of git://git.denx.de/u-boot-sh:
sh: add calling mmc_initialize in board.c
sh: sh7757lcr: Add KEEP order to start.o section
usb: r8a66597: Fix argument mistake of inl
sh: Clean up rsk7264 board settings
sh: sh2a: Add sh2a optimize to config.mk
sh: Fix rsk7203 alignment problem
sh: Add support for SH2A freestanding build
sh: Add Renesas rsk7264 board -
* 'master' of git://git.denx.de/u-boot-ubi:
ubifs: Fix bad free() sequence in ubifs_finddir()
22 Aug, 2011
8 commits
-
Some SH have MMC controller. So, if we need it, we have to call
the mmc_initialize().Signed-off-by: Yoshihiro Shimoda
Signed-off-by: Nobuhiro Iwamatsu -
The sh7757lcr has a local u-boot.lds because the sh7757lcr is only
supported the SPI booting.
This patch refers from the commit "sh: Add KEEP order to start.o section"
(commit ID: b52da2aed8c2c388661f369052a97d5b5c9ed00a).Signed-off-by: Yoshihiro Shimoda
Signed-off-by: Nobuhiro Iwamatsu -
Fail in build, because argument of inl used in r8a66597_read_fifo is wrong.
r8a66597.h:441:35: error: macro "inl" passed 2 arguments, but takes just 1
In file included from r8a66597-hcd.c:25:
r8a66597.h: In function ‘r8a66597_read_fifo’:
r8a66597.h:441: error: ‘inl’ undeclared (first use in this function)
r8a66597.h:441: error: (Each undeclared identifier is reported only once
r8a66597.h:441: error: for each function it appears in.)Signed-off-by: Nobuhiro Iwamatsu
-
Adjusted default settings so that we can boot zImages and uImages.
Removed unused settings, use default commands and where possible
calculate all other settings.Signed-off-by: Phil Edworthy
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
Only the optimization of sh2 had been supported up.
This adds the optimization of sh2a.Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
Signed-off-by: Phil Edworthy
Signed-off-by: Nobuhiro Iwamatsu -
SH2A toolchains often only provide an fdpic version of libgcc. This
can't be used with bare-metal software like U-Boot, so this patch
provides the necessary functions extracted from libgcc.Signed-off-by: Phil Edworthy
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
The rsk7264 (also know as rsk2+sh7264) is an SH2A based board
with 64MB NAND flash and 64MB SDRAM. It is very similar to the
rsk7203 board.Signed-off-by: Phil Edworthy
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
19 Aug, 2011
1 commit
-
Free private_data member element before freeing file structure.
This was causing malloc to crash. Also remove unnecessary variable
assigments as file structure gets free'd as well.Signed-off-by: Rod Boyce
Signed-off-by: Wolfgang Denk
Cc: Stefan Roese
Signed-off-by: Stefan Roese
09 Aug, 2011
8 commits
-
If you take a look at 96820a35, you'll see the original timeout was
CONFIG_SYS_HZ. Which is 1000. After the mentioned change, non-bulk timeout
was changed to 100. This causes timeout failures on the dreamplug platform
when trying to initialize the usb microsd reader.Signed-off-by: Jason Cooper
Acked-by: Mike Frysinger -
Signed-off-by: Marek Vasut
-
Signed-off-by: Marek Vasut
-
Fail in build, because argument of inl used in r8a66597_read_fifo is wrong.
r8a66597.h:441:35: error: macro "inl" passed 2 arguments, but takes just 1
In file included from r8a66597-hcd.c:25:
r8a66597.h: In function ‘r8a66597_read_fifo’:
r8a66597.h:441: error: ‘inl’ undeclared (first use in this function)
r8a66597.h:441: error: (Each undeclared identifier is reported only once
r8a66597.h:441: error: for each function it appears in.)Signed-off-by: Nobuhiro Iwamatsu
-
This is a small clean-up patch.
Signed-off-by: Simon Glass
Tested-by: Eric Bénard -
This describes what it is for, devices supported, how to enable for your
board in U-Boot, setting up the server, and notes about MAC addresses.Signed-off-by: Simon Glass
Tested-by: Eric Bénard -
Built-in Ethernet adapters support setting the mac address by means of a
ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).This adds similar support to the USB network side, using the names
usbethaddr, usbeth1addr, etc. They are kept separate since we don't want
a USB device taking the MAC address of a built-in device or vice versa.Signed-off-by: Simon Glass
Tested-by: Eric Bénard -
The SMSC95XX is a USB hub with a built-in Ethernet adapter. This adds support
for this, using the USB host network framework.Signed-off-by: Simon Glass
Tested-by: Eric Bénard
05 Aug, 2011
11 commits
-
There was a mix of UTF-8 and ISO-8859 files in the U-Boot source
tree, which could cause issues with the patchwork review system.
This commit converts all ISO-8859 files to UTF-8.Signed-off-by: Albert ARIBAUD
-
On newer rev5 hardware the extension board EEPROM I2C address
has been changed to 0x54. Make this I2C address configurable
depending on CONFIG_DIGSY_REV5 so that extention board presence
detection works correctly on newer hardware.Signed-off-by: Anatolij Gustschin
-
The U-Boot Design Principles[1] clearly say:
Initialize devices only when they are needed within U-Boot, i.e. don't
initialize the Ethernet interface(s) unless U-Boot performs a download
over Ethernet; don't initialize any IDE or USB devices unless U-Boot
actually tries to load files from these, etc. (and don't forget to
shut down these devices after using them - otherwise nasty things may
happen when you try to boot your OS).So, do not initialize and read the sensors on startup.
Signed-off-by: Heiko Schocher
cc: Wolfgang Denk
cc: Holger Brunck -
* 'master' of git://git.denx.de/u-boot-arm:
drivers/rtc: add Marvell Integrated RTC
Armada100: Add Board Support for Marvell GuruPlug-Display
Armada100: MFP macro naming correction
arm: auto gen asm-offsets.h for mb86r0x
spear: fix build errors for spear3xx/spear600 platforms
cosmetic: arm: lib/board.c: Coding Style cleanup
ARM: versatile: fix board support
SMDKV310: Enable device tree support
SMDKV310: MMC_SPL: Fix building when using "make O="
arm: a320: enable tagged list support
arm: a320: fix multiline comment style
ARMv7: u8500_href: Add missing header to fix compiler warning
Removed unused define, CONFIG_ARMV7.
avr32: add grasshopper (ICnova AP7000) board
AT91/SPI: fix atmel_dataflash_spi.c to allow building without warnings
MAKEALL: remove AT91 boards that are in boards.cfg
AT91: Makes AT91SAM9263-EK build correctly against u-boot-atmel/master
AT91: Makes AT91SAM9263 SoC build correctly against u-boot-atmel/master
AT91: Board fix for AT91SAM9261-EK
AT91: SoC fix at91sam9261_matrix.h
AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master
AT91: Makes AT91SAM9RL SoC build correctly against u-boot-atmel/master
AT91: change common at91sam9261 files to compile with new scheme
AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init)
a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART
README: fix arm920t/at91 path
net/eth.c: drop obsolete at91rm9200 support
README.at91-soc: remove AT91(RM9200) joining notice
a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning
MAKEALL: remove obsolete at91rm9200 soc
ARM: remove obsolete at91rm9200
omap4: clock init support for omap4460
omap4: support TPS programming
omap: reuse omap3 gpio support in omap4
omap4: sdram init changes for omap4460
omap4: add omap4460 revision detection
mkimage: Add OMAP boot image support
omap: add MMC and FAT support to SPL
omap: add basic SPL support
armv7: start.S: fixes and enhancements for SPL
omap4: automatic sdram detection
omap4: calculate EMIF register values
omap4: add sdram init support
omap4: add clock support
omap4: add OMAP4430 revision check
omap4: cleanup pin mux data
omap4: utility function to identify the context of hw init
DA8xx: fix LPSC constants
DA8xx: switch an enum to defines for consistency
DA8xx: add MMC/SD controller addresses
DaVinci EMAC: declare function for all DA8xx CPUs
DA8xx: add generic GPIO driver
DaVinci: rename gpio_defs.h to gpio.h
omap3evm: eth: Include functions only when necessary
omap3evm: Update ethernet reset sequence for Rev.G board
omap3evm: eth: split function setup_net_chip
omap3: Include array definition only when it is used
omap730p2: fix build breaks
omap2420h4: fix build breaks
omap1610inn: fix build breaks
omap1510inn: fix build breaks
omap5912osk: fix build breaks
omap1610h2: fix build breaks -
Signed-off-by: Anatolij Gustschin
-
Add detection of Coral-PA and configure Coral CCF an MMR parameters
using CONFIG_SYS_MB862xx_CCF and CONFIG_SYS_MB862xx_MMR macros.
Use CCF and MMR parameters for Coral-P Eval. Board if the appropriate
macros weren't defined.Signed-off-by: Anatolij Gustschin
-
The SHARP LQ084S3LG01 is a TFT LCD used on the P1022DS (revision "C") board.
This device only supports 800x600 resolution, so if that resolution is selected,
assume that this is the device. The device is attached to the LVDS port
on the P1022DS board.The existing 800x600 entry (for the PDM360NG board) is actually 800x480,
so we fix that. To support two different 800x resolutions, the Y-resolution
is now passed to fsl_diu_init() and both values are used to pick the proper
fb_videomode structure.The data for the 800x600 video mode is originally from Jiang Yutang.
Signed-off-by: Timur Tabi
Signed-off-by: Jiang Yutang -
This driver can be used for kirkwood SoCs by enabling CONFIG_RTC_MV. Tested on
Global Scale Technologies Dreamplug.Signed-off-by: Jason Cooper
-
This patch adds basic board support with DRAM and UART functionality
Signed-off-by: Prafulla Wadaskar
Signed-off-by: Ajay Bhargav
Acked-by: Tanmay Upadhyay -
MFP macros for UART3 updated.
Signed-off-by: Ajay Bhargav
04 Aug, 2011
2 commits
-
auto gen asm-offsets.h for mb86r0x
Signed-off-by: Matthias Weisser
-
Signed-off-by: Shiraz Hashim
Acked-by: Vipin Kumar
