Eric Lee / smarc-uboot

04 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

23 Sep, 2019

1 commit

26 Aug, 2019

1 commit

18 May, 2019

1 commit

  • a0aba8a2e   CONFIG_SYS_[DI]CACHE_OFF: convert to Kconfig ... Browse Code »

    CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig
    parameters; only for the ARC architecture. This patch turns these two
    parameters into Kconfig items everywhere else they are found.

    All of the include/configs/* and defconfig changes in this patch are
    for arm machines only. The Kconfig changes for arc, nds32, riscv,
    and xtensa have been included since these symbols are found in code
    under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined
    include/configs/* or defconfigs for these architectures exist which
    include these symbols.

    These results have been confirmed with tools/moveconfig.py.

    Acked-by: Alexey Brodkin
    Signed-off-by: Trevor Woerner
    [trini: Re-migrate for a few more boards]
    Signed-off-by: Tom Rini

    Trevor Woerner
     

30 Apr, 2019

1 commit

22 Feb, 2019

1 commit

04 Sep, 2018

1 commit

17 Apr, 2018

1 commit

08 Apr, 2018

1 commit

28 Feb, 2018

1 commit

23 Feb, 2018

1 commit

15 Feb, 2018

1 commit

  • 75670c81e   configs: Migrate CONFIG_SPL_FRAMEWORK ... Browse Code »

    Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the
    current set of options we have in Kconfig. We will need to have some
    options available for SPL and !SPL_FRAMEWORK so this is important. In a
    few cases we re-order existing options so that we have less escapes from
    the SPL_FRAMEWORK guard.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

02 Feb, 2018

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

04 Oct, 2017

1 commit

  • a95aee6af   usb: gadget: Make g_dnl USB settings common ... Browse Code »

    The g_dnl USB settings for the vendor ID, product ID and manufacturer are
    actually common settings that can and should be shared by all the gadgets.

    Make them common by renaming them, and convert all the users.

    Reviewed-by: Simon Glass
    Reviewed-by: Lukasz Majewski
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

15 Aug, 2017

1 commit

12 Aug, 2017

1 commit

05 Jun, 2017

1 commit

28 Jan, 2017

3 commits

11 Jan, 2017

1 commit

  • 55ed3b469   mmc: move CONFIG_DWMMC to Kconfig, renaming to CONFIG_MMC_DW ... Browse Code »

    This commit was created as follows:

    [1] Rename the option with the following command:
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e 's/CONFIG_DWMMC/CONFIG_MMC_DW/g'

    [2] create the entry for MMC_DW in drivers/mmc/Kconfig
    (the prompt and help were copied from Linux)

    [3] run "tools/moveconfig.py -y MMC_DW"

    [4] add "depends on MMC_DW" to the MMC_DW_ROCKCHIP entry

    [5] Clean-up doc/README.socfpga by hand

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Marek Vasut

    Masahiro Yamada
     

30 Dec, 2016

3 commits

  • 45a68fe26   mmc: move some SDHCI related options to Kconfig ... Browse Code »

    While I moved the options, I also renamed them so that they are all
    prefixed with MMC_SDHCI_.

    This commit was created in the following steps.

    [1] Rename with the following command
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e '
    s/CONFIG_MMC_SDMA/CONFIG_MMC_SDHCI_SDMA/g
    s/CONFIG_BCM2835_SDHCI/CONFIG_MMC_SDHCI_BCM2835/g
    s/CONFIG_KONA_SDHCI/CONFIG_MMC_SDHCI_KONA/g
    s/CONFIG_MV_SDHCI/CONFIG_MMC_SDHCI_MV/g
    s/CONFIG_S5P_SDHCI/CONFIG_MMC_SDHCI_S5P/g
    s/CONFIG_SPEAR_SDHCI/CONFIG_MMC_SDHCI_SPEAR/g
    '

    [2] create the Kconfig entries in drivers/mmc/Kconfig

    [3] Move the options by the following command
    tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \
    MMC_SDHCI_KONA MMC_SDHCI_MV MMC_SDHCI_S5P MMC_SDHCI_SPEAR

    [4] Sort drivers/mmc/Makefile for readability

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     
  • e1ce61fbb   mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI ... Browse Code »

    Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI.
    My motivation for the rename is, ultimately, to make all the MMC
    options prefixed with MMC_ and SDHCI options with MMC_SDHCI_,
    like Linux.

    This commit was created as follows:

    [1] Rename the config option with the following command:
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g'

    [2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig

    [3] run "tools/moveconfig.py -y MMC_SDHCI"

    [4] add "depends on MMC_SDHCI" to existing SDHCI driver entries

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     
  • 187809517   Sync defconfig files by savedefconfig ... Browse Code »

    Generated by "tools/moveconfig -s".

    This will make config moves easier.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

05 Dec, 2016

1 commit

  • fc47cf9d0   arm: exynos: i2c: Convert exynos boards to use DM_I2C ... Browse Code »

    Three boards are still not converting to use DM_I2C. They are also using
    the old PMIC framework. Rather than removing them, add #ifdefs to allow
    them to continue to build. This will give the maintainers a little more
    time to decide whether to convert them or not.

    Signed-off-by: Simon Glass
    Acked-by: Heiko Schocher

    Simon Glass
     

24 Oct, 2016

2 commits

27 Sep, 2016

1 commit

  • 6828e602b   dfu: Migrate to Kconfig ... Browse Code »
    14

    Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for
    CMD_DFU (as we must have the DFU command enabled to do anything DFU).
    Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add
    options for all of the back end choices that DFU can make use of.

    Cc: Lukasz Majewski
    Signed-off-by: Tom Rini
    Acked-by: Lukasz Majewski

    Tom Rini
     

20 Sep, 2016

1 commit

25 May, 2016

1 commit

  • 36aa89377   arm: exynos: realign the code to allow support for newer 64-bit platforms ... Browse Code »

    The existing Exynos 32-bit platform support needs to be realigned in
    order to support newer 64-bit Exynos platforms. The driver model will
    be utlized for drivers on the 64-bit Exynos platforms and so some of
    the older platform support code would not be required for the newer
    64-bit Exynos platforms.

    Cc: Minkyu Kang
    Signed-off-by: Thomas Abraham
    Reviewed-by: Simon Glass
    Signed-off-by: Minkyu Kang

    Thomas Abraham
     

26 Apr, 2016

3 commits

20 Apr, 2016

2 commits