Eric Lee / smarc-uboot

06 Feb, 2020

1 commit

27 Jan, 2020

1 commit

16 Jan, 2020

1 commit

18 Aug, 2019

1 commit

  • d117f917b   global_data: Remove comment of reserved arch-specific GD flags ... Browse Code »

    With the removal of the x86 specific GD flags, there are no arch-
    specific GD flags any more. Let's remove the comment about reserving the
    upper 16 bits for arch-specific flags in the common header. This gives
    us more flexibility with the usage of the GD flags.

    As a matter of fact, we are already using more than 16 bits for common
    GD flags (with the addition of GD_FLG_WDT_READY).

    Signed-off-by: Stefan Roese
    Cc: Bin Meng
    Cc: Simon Glass
    Cc: Tom Rini
    Cc: Simon Goldschmidt
    Reviewed-by: Bin Meng
    Reviewed-by: Simon Goldschmidt
    Reviewed-by: Simon Glass

    Stefan Roese
     

31 Jul, 2019

1 commit

30 Jul, 2019

1 commit

29 Jul, 2019

1 commit

27 Jul, 2019

1 commit

20 Jul, 2019

1 commit

  • 6874cb722   watchdog: Split WDT from SPL_WDT ... Browse Code »
    12

    Use CONFIG_IS_ENABLED(WDT) to permit use of WDT in SPL without DM,
    while the full U-Boot can use rich DM/DT WDT driver.

    Signed-off-by: Marek Vasut
    Cc: Peng Fan
    Cc: Stefano Babic
    Tested-by: Heiko Schocher
    Tested-by: Suniel Mahesh

    Marek Vasut
     

17 Jul, 2019

1 commit

13 Jul, 2019

1 commit

  • 5fc7cf8c8   gpio: add gpio-hog support ... Browse Code »

    add gpio-hog support. GPIO hogging is a mechanism
    providing automatic GPIO request and configuration
    as part of the gpio-controller's driver probe function.

    for more infos see:
    doc/device-tree-bindings/gpio/gpio.txt

    Signed-off-by: Heiko Schocher
    Tested-by: Michal Simek (zcu102)
    Tested-by: Patrick Delaunay

    Heiko Schocher
     

26 Apr, 2019

1 commit

  • 06985289d   watchdog: Implement generic watchdog_reset() version ... Browse Code »
    72

    This patch tries to implement a generic watchdog_reset() function that
    can be used by all boards that want to service the watchdog device in
    U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG.

    Without this approach, new boards or platforms needed to implement a
    board specific version of this functionality, mostly copy'ing the same
    code over and over again into their board or platforms code base.

    With this new generic function, the scattered other functions are now
    removed to be replaced by the generic one. The new version also enables
    the configuration of the watchdog timeout via the DT "timeout-sec"
    property (if enabled via CONFIG_OF_CONTROL).

    This patch also adds a new flag to the GD flags, to flag that the
    watchdog is ready to use and adds the pointer to the watchdog device
    to the GD. This enables us to remove the global "watchdog_dev"
    variable, which was prone to cause problems because of its potentially
    very early use in watchdog_reset(), even before the BSS is cleared.

    Signed-off-by: Stefan Roese
    Cc: Heiko Schocher
    Cc: Tom Rini
    Cc: Michal Simek
    Cc: "Marek Behún"
    Cc: Daniel Schwierzeck
    Cc: Maxim Sloyko
    Cc: Erik van Luijk
    Cc: Ryder Lee
    Cc: Weijie Gao
    Cc: Simon Glass
    Cc: "Álvaro Fernández Rojas"
    Cc: Philippe Reynes
    Cc: Christophe Leroy
    Reviewed-by: Michal Simek
    Tested-by: Michal Simek (on zcu100)

    Stefan Roese
     

24 Apr, 2019

1 commit

  • f2100f6f7   dm: core: Change platform specific translation-offset handling ... Browse Code »

    Testing has shown that the current DM implementation of a platform /
    board specific translation offset, as its needed for the SPL on MVEBU
    platforms is buggy. The translation offset is confingured too late,
    after the driver bind functions are run. This may result in incorrect
    address translations. With the current implementation its not possible
    to configure the offset earlier, as the DM code has not run at all.

    This patch now removed the set_/get_translation_offset() calls and
    moves the translation offset into the GD variable translation_offset.
    This variable will get used when CONFIG_TRANSLATION_OFFSET is enabled.
    This option is enabled only for MVEBU on ARM32 platforms, where its
    currenty needed and configured in the SPL.

    Signed-off-by: Stefan Roese
    Cc: Pierre Bourdon
    Cc: Baruch Siach
    Cc: Simon Glass
    Cc: Heiko Schocher
    Cc: Tom Rini
    Tested-by: Pierre Bourdon
    Tested-by: Baruch Siach

    Stefan Roese
     

10 Dec, 2018

1 commit

  • f1d2bc903   lib: fdtdec: Add function re-setup the fdt more effeciently ... Browse Code »

    In some cases it may be useful to be able to change the fdt we have been
    using and use another one instead. For example, the TI platforms uses an
    EEPROM to store board information and, based on the type of board,
    different dtbs are used by the SPL. When DM_I2C is used, a first dtb must
    be used before the I2C is initialized and only then the final dtb can be
    selected.
    To speed up the process and reduce memory usage, introduce a new function
    fdtdec_setup_best_match() that re-use the DTBs loaded in memory by
    fdtdec_setup() to select the best match.

    Signed-off-by: Jean-Jacques Hiblot
    Reviewed-by: Heiko Schocher

    Jean-Jacques Hiblot
     

03 Dec, 2018

1 commit

  • 16c3da3fe   pe.h: Add characteristics defines ... Browse Code »

    This adds characteristics macros as defined by the Microsoft PE
    Format documentation [1].

    [1] https://docs.microsoft.com/zh-cn/windows/desktop/Debug/pe-format

    Signed-off-by: Bin Meng
    Reviewed-by: Heinrich Schuchardt
    Signed-off-by: Alexander Graf

    Bin Meng
     

26 Nov, 2018

2 commits

  • b0edea3c2   spl: Add support for passing handoff info to U-Boot proper ... Browse Code »

    There is some basic informaton that SPL normally wants to pass through to
    U-Boot, such as the SDRAM size and bank information.

    Mkae use of the new bloblist structure for this. Add a new 'handoff' blob
    which is set up in SPL and passed to U-Boot proper. Also adda test for
    sandbox_spl that checks that this works correctly and a new 'sb' command
    to show the information passed from SPL.

    Reviewed-by: Tom Rini
    Signed-off-by: Simon Glass

    Simon Glass
     
  • f0293d33b   bloblist: Locate bloblist in U-Boot ... Browse Code »

    Add support for locating a bloblist in U-Boot that has been set up by SPL.
    It is copied into RAM during relocation.

    Reviewed-by: Tom Rini
    Signed-off-by: Simon Glass

    Simon Glass
     

26 Sep, 2018

1 commit

  • 461f45681   Add include/asm-generic/atomic.h ... Browse Code »

    The arm, xtensa and mips version of atomic.h were already very similar
    (the mips one was a copy of xtensa). Combine these implementations
    together to produce a generic atomic.h that can be included by these
    architectures (and any others that need it in future).

    Signed-off-by: Chris Packham
    Reviewed-by: Tom Rini

    Chris Packham
     

11 Sep, 2018

1 commit

30 Jul, 2018

1 commit

  • d30ba2315   u-boot: remove driver lookup loop from env_save() ... Browse Code »
    28

    When called with ENVOP_SAVE, env_get_location() only returns the
    gd->env_load_location variable without actually checking for
    the environment location and priority.

    This behaviour causes env_save() to fall into an infinite loop when
    the low-level drv->save() call fails.

    The env_save() function should not loop through the environment
    location list but it should save the environment into the location
    stored in gd->env_load_location by the last env_load() call.

    Signed-off-by: Nicholas Faustini
    Reviewed-by: Simon Goldschmidt

    Nicholas Faustini
     

09 Jul, 2018

1 commit

  • 90c08fa03   fdt: Add device tree memory bindings ... Browse Code »
    14

    Support a default memory bank, specified in reg, as well as
    board-specific memory banks in subtree board-id nodes.

    This allows memory information to be provided in the device tree,
    rather than hard-coded in, which will make it simpler to handle
    similar devices with different memory banks, as the board-id values
    or masks can be used to match devices.

    Signed-off-by: Michael Pratt
    Signed-off-by: Simon Glass
    Reviewed-by: Vadim Bendebury

    Michael Pratt
     

03 Jun, 2018

1 commit

  • c3b11dea7   efi_loader: allow unaligned memory access ... Browse Code »

    The UEFI spec mandates that unaligned memory access should be enabled if
    supported by the CPU architecture.

    This patch adds an empty weak function unaligned_access() that can be
    overridden by an architecture specific routine.

    Signed-off-by: Heinrich Schuchardt
    Signed-off-by: Alexander Graf

    Heinrich Schuchardt
     

11 May, 2018

1 commit

  • f739fcd83   SPDX: Convert a few files that were missed before ... Browse Code »

    As part of the main conversion a few files were missed. These files had
    additional whitespace after the '*' and before the SPDX tag and my
    previous regex was too strict. This time I did a grep for all SPDX tags
    and then filtered out anything that matched the correct styles.

    Fixes: 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style")
    Reported-by: Heinrich Schuchardt
    Signed-off-by: Tom Rini

    Tom Rini
     

07 May, 2018

1 commit

  • 83d290c56   SPDX: Convert all of our single license tags to Linux Kernel style ... Browse Code »
    56

    When U-Boot started using SPDX tags we were among the early adopters and
    there weren't a lot of other examples to borrow from. So we picked the
    area of the file that usually had a full license text and replaced it
    with an appropriate SPDX-License-Identifier: entry. Since then, the
    Linux Kernel has adopted SPDX tags and they place it as the very first
    line in a file (except where shebangs are used, then it's second line)
    and with slightly different comment styles than us.

    In part due to community overlap, in part due to better tag visibility
    and in part for other minor reasons, switch over to that style.

    This commit changes all instances where we have a single declared
    license in the tag as both the before and after are identical in tag
    contents. There's also a few places where I found we did not have a tag
    and have introduced one.

    Signed-off-by: Tom Rini

    Tom Rini
     

07 Apr, 2018

1 commit

17 Feb, 2018

1 commit

  • e1caa5841   env: Fix env_load_location ... Browse Code »

    Commit 7d714a24d725 ("env: Support multiple environments") added
    static variable env_load_location. When saving environmental
    variables, this variable is presumed to have the value set before.
    In case the value was set before relocation and U-Boot runs from a
    NOR flash, this variable wasn't writable. This causes failure when
    saving the environment. To save this location, global data must be
    used instead.

    Signed-off-by: York Sun
    CC: Maxime Ripard

    York Sun
     

10 Feb, 2018

1 commit

  • 268ec6e00   efi_loader: fix building crt0 on arm ... Browse Code »

    Before the patch an undefined constant EFI_SUBSYSTEM was used in the
    crt0 code. The current version of binutils does not swallow the error.

    https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=888403

    The necessary constant IMAGE_SUBSYSTEM_EFI_APPLICATION is already
    defined in pe.h. So let's factor out asm-generic/pe.h for the
    image subsystem constants and use it in our assembler code.

    IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER does not exist in the specification
    let's use IMAGE_SUBSYSTEM_EFI_ROM instead.

    The include pe.h is only used in code maintained by Alex so let him be the
    maintainer here too.

    Reported-by: Andre Przywara
    Signed-off-by: Heinrich Schuchardt
    Tested-by: Vagrant Cascadian
    Signed-off-by: Alexander Graf

    Heinrich Schuchardt
     

04 Feb, 2018

1 commit

  • 3b73e8d06   log: Add control over log formatting ... Browse Code »

    It is useful to be able to control the output format of log records on the
    console. As a starting point, add definitions for controlling which
    elements of the log record are displayed. Use function and message as the
    default, since these are the most useful fields.

    Signed-off-by: Simon Glass

    Simon Glass
     

28 Jan, 2018

1 commit

  • 9c3264ce4   atomic-long: Fix warnings on arm64 ... Browse Code »

    Several inline functions in this file reference undefined functions in
    U-Boot. For example:

    atomic-long.h:73:9: warning: implicit declaration of function
    'atomic64_sub_and_test'
    atomic-long.h:80:9: warning: implicit declaration of function
    'atomic64_dec_and_test'
    atomic-long.h:87:9: warning: implicit declaration of function
    'atomic64_inc_and_test'

    Handle this the same as the 32 bit build by wrapping these functions in
    a __UBOOT__ check.

    Signed-off-by: Bradley Bolen

    Bradley Bolen
     

27 Jan, 2018

1 commit

  • 1d4460871   env: Initialise all the environments ... Browse Code »

    Since we want to have multiple environments, we will need to initialise
    all the environments since we don't know at init time what drivers might
    fail when calling load.

    Let's init all of them, and only consider for further operations the ones
    that have not reported any errors at init time.

    Reviewed-by: Simon Glass
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

08 Dec, 2017

3 commits

03 Oct, 2017

1 commit

  • d4150ca6d   Provide a generic io.h & address mapping functions ... Browse Code »

    Most architectures currently supported by U-Boot use trivial
    implementations of map_to_physmem & virt_to_phys which simply cast a
    physical address to a pointer for use a virtual address & vice-versa.
    This results in a lot of duplicate implementations of these mapping
    functions.

    The set of functions provided by different architectures also differs,
    with some having implementations of phys_to_virt & others not. A later
    patch will make use of phys_to_virt in architecture-neutral code, and so
    requires that it be provided for all architectures.

    This patch introduces an asm-generic/io.h which provides generic
    implementations of address mapping functions, allowing the duplication
    of them between architectures to be removed. Once architectures are
    converted to make use of this generic header it will also ensure that
    all of phys_to_virt, virt_to_phys, map_physmem & unmap_physmem are
    provided. The 2 families of functions differ in that map_physmem may
    create dynamic mappings whilst phys_to_virt may not & therefore is more
    limited in scope but doesn't require information such as a length &
    flags.

    This patch doesn't convert any architectures to make use of this generic
    header - later patches in the series will do so.

    Signed-off-by: Paul Burton
    Cc: Albert Aribaud
    Cc: Alexey Brodkin
    Cc: Angelo Dureghello
    Cc: Bin Meng
    Cc: Daniel Schwierzeck
    Cc: Macpaul Lin
    Cc: Michal Simek
    Cc: Nobuhiro Iwamatsu
    Cc: Thomas Chou
    Cc: Wolfgang Denk
    Acked-by: Angelo Dureghello
    Tested-by: Angelo Dureghello
    Reviewed-by: Simon Glass
    Reviewed-by: Daniel Schwierzeck

    Paul Burton
     

19 Sep, 2017

1 commit

  • 5e44489bc   efi_loader: rename __efi_hello_world_* ... Browse Code »

    In scripts/Makefile.lib we build section including helloworld.efi.
    This allows to load the EFI binary with command 'bootefi hello'.

    scripts/Makefile.lib contains explicit references to strings
    containing helloworld and hello_world. This makes it impossible
    to generalize the coding to accomodate additional built in
    EFI binaries.

    Let us rename the variables __efi_hello_world_* to
    __efi_helloworld_*.

    Signed-off-by: Heinrich Schuchardt
    Signed-off-by: Alexander Graf

    Heinrich Schuchardt
     

16 Aug, 2017

1 commit

  • 00caae6d4   env: Rename getenv/_f() to env_get() ... Browse Code »

    We are now using an env_ prefix for environment functions. Rename these
    two functions for consistency. Also add function comments in common.h.

    Quite a few places use getenv() in a condition context, provoking a
    warning from checkpatch. These are fixed up in this patch also.

    Suggested-by: Wolfgang Denk
    Signed-off-by: Simon Glass

    Simon Glass
     

15 Aug, 2017

1 commit

27 Jul, 2017

1 commit

  • f1896c45c   spl: make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN ... Browse Code »
    20

    Some platforms have very limited SRAM to run SPL code, so there may
    not be the same amount space for a malloc pool before relocation in
    the SPL stage as the normal U-Boot stage.

    Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
    so the size of pre-relocation malloc pool can be configured memory
    space independently.

    Signed-off-by: Andy Yan
    Reviewed-by: Tom Rini
    Acked-by: Philipp Tomsich
    Reviewed-by: Philipp Tomsich
    [fixed up commit-message:]
    Signed-off-by: Philipp Tomsich

    Andy Yan
     

09 Jul, 2017

1 commit

  • 907208c45   powerpc: Partialy restore core of mpc8xx ... Browse Code »
    14

    CS Systemes d'Information (CSSI) manufactures 8xx boards for
    critical communication systems. Those boards have been
    running U-Boot since 2010 and will have to be maintained
    until at least 2027.

    commit 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f
    ("powerpc, 8xx: remove support for 8xx") orphaned those boards
    by removing support for the mpc8xx CPU.

    This commit partially restores support for the 8xx, with the
    following limitations:
    - Restores support for MPC866 and MPC885 only
    - Does not restore IDE, PCMCIA, I2C, USB
    - Does not restore examples
    - Does not restore POST
    - Does not restore Ethernet on SCC
    - Does not restore console on SCC
    - Does not restore bedbug and kgdb support

    As the 866 and 885 do not support the following features,
    they are not restored either:
    - VIDEO / LCD
    - RTC clock

    The CPM uCODE patch is not restored either, because:
    - 866 and 885 already have support for I2C and SPI relocation
    without a uCODE patch
    - relocation of SMC, I2C or SPI is only needed for using SCCs
    for Ethernet or QMC

    The dynamic setup/calculation of clocks is removed, we
    expect the target being use with the clock and PLPRCR register
    defined in the configuration.
    All the clock settings for 8xx prior to 866 is removed as
    well as we now only support 866 and 885.

    This code is mature and addresses mature boards. Therefore
    all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif'
    is unneeded.

    The following files are not restored by this patch:

    - arch/powerpc/cpu/mpc8xx/bedbug_860.c
    - arch/powerpc/cpu/mpc8xx/fec.h
    - arch/powerpc/cpu/mpc8xx/kgdb.S
    - arch/powerpc/cpu/mpc8xx/plprcr_write.S
    - arch/powerpc/cpu/mpc8xx/scc.c
    - arch/powerpc/cpu/mpc8xx/upatch.c
    - arch/powerpc/cpu/mpc8xx/video.c
    - arch/powerpc/include/asm/status_led.h
    - arch/powerpc/lib/ide.c
    - arch/powerpc/lib/ide.h
    - doc/README.MPC866
    - drivers/pcmcia/mpc8xx_pcmcia.c
    - drivers/rtc/mpc8xx.c
    - drivers/usb/gadget/mpc8xx_udc.c
    - drivers/video/mpc8xx_lcd.c
    - examples/standalone/test_burst.c
    - examples/standalone/test_burst.h
    - examples/standalone/test_burst_lib.S
    - examples/standalone/timer.c
    - include/mpc823_lcd.h
    - include/usb/mpc8xx_udc.h
    - post/cpu/mpc8xx/Makefile
    - post/cpu/mpc8xx/cache.c
    - post/cpu/mpc8xx/cache_8xx.S
    - post/cpu/mpc8xx/ether.c
    - post/cpu/mpc8xx/spr.c
    - post/cpu/mpc8xx/uart.c
    - post/cpu/mpc8xx/usb.c
    - post/cpu/mpc8xx/watchdog.c

    Some of the restored files are not located in a proper location.
    In order to keep traceability of the changes, they will be
    moved to their correct location and moved to Kconfig in a
    followup patch.

    This patch also declares CSSI as point of contact for the update
    of the 8xx platform, as those boards are the only ones still
    being maintained on the 8xx area. A later patch will add
    those boards to the tree.

    Signed-off-by: Christophe Leroy

    Christophe Leroy
     

07 Jul, 2017

1 commit

  • daab59ac0   avr32: Retire AVR32 for good ... Browse Code »

    AVR32 is gone. It's already more than two years for no support in Buildroot,
    even longer there is no support in GCC (last version is heavily patched 4.2.4).

    Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

    There is no good point to keep this support in U-Boot either.

    Reviewed-by: Simon Glass
    Reviewed-by: Tom Rini
    Reviewed-by: Heiko Schocher
    Signed-off-by: Andy Shevchenko

    Andy Shevchenko