Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

21 Nov, 2019

2 commits

  • 32a238df7   configs: Resync with savedefconfig ... Browse Code »

    Rsync all defconfig files using moveconfig.py

    Signed-off-by: Tom Rini

    Tom Rini
     
  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     

26 Aug, 2019

1 commit

11 Jun, 2019

1 commit

  • cd7e76ffb   toradex apalis/colibri: extend CONFIG_SYS_MALLOC_F_LEN ... Browse Code »

    Extend size of the malloc() pool for use before relocation, from 0x400
    (default one) to 0x2000 (CONFIG_SYS_MALLOC_F_LEN=0x2000),
    as adding of DM_FLAG_PRE_RELOC flag to simple-bus driver introduced a
    regression on multiple boards, because of more intensive usage of malloc()
    pool and therefore a broken boot as the size of pool isn't sufficient.

    Fixes: 3a7c45f6a7 ("simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus")
    Signed-off-by: Igor Opaniuk
    Reviewed-by: Bin Meng

    Igor Opaniuk
     

18 May, 2019

1 commit

  • a0aba8a2e   CONFIG_SYS_[DI]CACHE_OFF: convert to Kconfig ... Browse Code »

    CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig
    parameters; only for the ARC architecture. This patch turns these two
    parameters into Kconfig items everywhere else they are found.

    All of the include/configs/* and defconfig changes in this patch are
    for arm machines only. The Kconfig changes for arc, nds32, riscv,
    and xtensa have been included since these symbols are found in code
    under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined
    include/configs/* or defconfigs for these architectures exist which
    include these symbols.

    These results have been confirmed with tools/moveconfig.py.

    Acked-by: Alexey Brodkin
    Signed-off-by: Trevor Woerner
    [trini: Re-migrate for a few more boards]
    Signed-off-by: Tom Rini

    Trevor Woerner
     

30 Apr, 2019

1 commit

20 Oct, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

17 Apr, 2018

1 commit

09 Apr, 2018

2 commits

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

2 commits

26 Jul, 2017

1 commit

13 Feb, 2017

1 commit

  • e856bdcfb   flash: complete CONFIG_SYS_NO_FLASH move with renaming ... Browse Code »
    20

    We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
    not completed. Finish this work by the tool.

    During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
    Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
    than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
    make the code more readable. Besides, negative meaning symbols do
    not fit in obj-$(CONFIG_...) style Makefiles.

    This commit was created as follows:

    [1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

    [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

    [3] Rename the instances in defconfigs by the following:
    find . -path './configs/*_defconfig' | xargs sed -i \
    -e '/CONFIG_SYS_NO_FLASH=y/d' \
    -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

    [4] Change the conditionals by the following:
    find . -name '*.[ch]' | xargs sed -i \
    -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
    -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
    -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
    -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

    [5] Modify the following manually
    - Rename the rest of instances
    - Remove the description from README
    - Create the new Kconfig entry in drivers/mtd/Kconfig
    - Remove the old Kconfig entry from common/Kconfig
    - Remove the garbage comments from include/configs/*.h

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

23 Nov, 2016

3 commits

12 Oct, 2016

1 commit

10 Sep, 2016

1 commit

26 Apr, 2016

3 commits

16 Mar, 2016

1 commit

  • ed980b8c6   efi_loader: hook up in build environment ... Browse Code »

    Now that we have all the bits and pieces ready for EFI payload loading
    support, hook them up in Makefiles and KConfigs so that we can build.

    Signed-off-by: Alexander Graf
    Reviewed-by: Simon Glass
    Tested-by: Simon Glass
    [trini: Enable only when we of OF_LIBFDT, disable on kwb and colibri_pxa270]
    Signed-off-by: Tom Rini

    Alexander Graf
     

15 Mar, 2016

1 commit

26 Jun, 2015

1 commit

01 Jun, 2015

1 commit

30 Jul, 2014

1 commit

  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada