Eric Lee / smarc-uboot

05 Dec, 2019

2 commits

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

26 Aug, 2019

1 commit

02 Aug, 2019

1 commit

  • 37304aaf6   Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig ... Browse Code »
    4

    This converts the following to Kconfig:
    CONFIG_USE_PREBOOT
    CONFIG_PREBOOT

    Both are together in one commit, since otherwise the former causes kconfig
    to define the latter, which gives duplicate symbol errors.

    Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
    backslash lands in the wrong place. Similarly with socfpga_vining_fpga.

    Signed-off-by: Simon Glass

    Simon Glass
     

18 May, 2019

1 commit

  • a0aba8a2e   CONFIG_SYS_[DI]CACHE_OFF: convert to Kconfig ... Browse Code »

    CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig
    parameters; only for the ARC architecture. This patch turns these two
    parameters into Kconfig items everywhere else they are found.

    All of the include/configs/* and defconfig changes in this patch are
    for arm machines only. The Kconfig changes for arc, nds32, riscv,
    and xtensa have been included since these symbols are found in code
    under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined
    include/configs/* or defconfigs for these architectures exist which
    include these symbols.

    These results have been confirmed with tools/moveconfig.py.

    Acked-by: Alexey Brodkin
    Signed-off-by: Trevor Woerner
    [trini: Re-migrate for a few more boards]
    Signed-off-by: Tom Rini

    Trevor Woerner
     

30 Apr, 2019

1 commit

12 Apr, 2019

1 commit

14 Nov, 2018

1 commit

  • cbabe7f87   configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS ... Browse Code »

    Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
    that had been enabling it turn it on by hand. This exposed that we had
    not yet migrated CMD_MTDPARTS fully, so do so now.

    Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()")
    Signed-off-by: Tom Rini

    Tom Rini
     

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

07 Aug, 2018

1 commit

17 May, 2018

1 commit

15 May, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

13 Dec, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

23 May, 2017

2 commits

16 May, 2017

1 commit

01 May, 2017

1 commit

14 Mar, 2017

1 commit

28 Jan, 2017

3 commits

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

12 Oct, 2016

1 commit

27 Sep, 2016

1 commit

20 Sep, 2016

1 commit

10 Sep, 2016

1 commit

10 Jun, 2016

1 commit

26 Apr, 2016

3 commits