Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

05 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

08 Oct, 2019

1 commit

23 Sep, 2019

1 commit

24 Aug, 2019

1 commit

23 Jun, 2019

1 commit

15 May, 2019

1 commit

  • 77b508d34   net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together ... Browse Code »

    Commit d397f7c45b0b ("net: phy: micrel: Separate KSZ9000 drivers from
    KSZ8000 drivers") separated the KSZ8xxx and KSZ90x1 drivers and warns
    that you shouldn't select both of them due to a device ID clash between
    the KSZ9021 and the KS8721, asserting that "it is highly unlikely for a
    system to contain both a KSZ8000 and a KSZ9000 PHY". Unfortunately
    boards like the SAMA5D3xEK do contain both types of PHY, but fortunately
    the Linux Micrel PHY driver provides a solution by using different PHY
    ID and mask values to distinguish these chips.

    This commit contains the following changes:

    - The PHY ID and mask values for the KSZ9021 and the KS8721 now match
    those used by the Linux driver.
    - The warnings about not enabling both drivers have been removed.
    - The description for PHY_MICREL_KSZ8XXX has been corrected (these are
    10/100 PHYs, not GbE PHYs).
    - PHY_MICREL_KSZ9021 and PHY_MICREL_KSZ9031 no longer select PHY_GIGE
    since this is selected by PHY_MICREL_KSZ90X1.
    - All of the relevant defconfig files have been updated now that
    PHY_MICREL_KSZ8XXX does not default to 'Y'.

    Signed-off-by: James Byrne
    Acked-by: Joe Hershberger

    James Byrne
     

05 May, 2019

1 commit

  • 623de3f08   Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SUPPORT_EMMC_BOOT

    As requested by Michal Simek , these boards
    have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated:

    xilinx_zynqmp_zc1275_revB
    xilinx_zynqmp_zc1751_xm018_dc4
    xilinx_zynqmp_zc1751_xm019_dc5
    xilinx_zynqmp_zcu100_revC
    xilinx_zynqmp_zcu102_rev1_0
    xilinx_zynqmp_zcu102_revA
    xilinx_zynqmp_zcu102_revB
    xilinx_zynqmp_zcu104_revA
    xilinx_zynqmp_zcu104_revC
    xilinx_zynqmp_zcu106_revA
    xilinx_zynqmp_zcu111_revA

    Signed-off-by: Alex Kiernan
    Acked-by: Lukasz Majewski
    Acked-by: Patrick Delaunay
    Acked-by: Ramon Fried
    Reviewed-by: Andy Shevchenko
    Tested-by: Sébastien Szymanski

    Alex Kiernan
     

30 Apr, 2019

2 commits

13 Mar, 2019

4 commits

19 Jan, 2019

1 commit

  • 2acc24fc2   Kconfig: Migrate BOUNCE_BUFFER ... Browse Code »

    The bounce buffer is used by a few drivers (most of the MMC drivers)
    to overcome limitations in their respective DMA implementation.

    This moves the configuration to Kconfig and makes it user-selectable
    (even though it will be a required feature to make those drivers
    work): the expected usage is for drivers depending on this to 'select'
    it unconditionally from their respective Kconfig (see follow-up
    patches).

    This commit includes a full migration using moveconfig.py to ensure
    that each commit compiles. To ensure bisectability we update
    dependencies of various drivers to now select BOUNCE_BUFFER when needed.

    [trini: Squash all patches to ensure bisectability]
    Signed-off-by: Tom Rini
    Signed-off-by: Philipp Tomsich
    Reviewed-by: Otavio Salvador [dw_mmc portion]
    Reviewed-by: Fabio Estevam [mxsmmc portion]
    Reviewed-by: Simon Glass [tegra portion]

    Philipp Tomsich
     

11 Jan, 2019

1 commit

08 Jan, 2019

1 commit

14 Sep, 2018

1 commit