Eric Lee / smarc-uboot

05 Dec, 2019

2 commits

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

26 Aug, 2019

1 commit

30 Apr, 2019

1 commit

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

09 Apr, 2018

1 commit

28 Feb, 2018

1 commit

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

02 Feb, 2018

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

04 Oct, 2017

1 commit

  • a95aee6af   usb: gadget: Make g_dnl USB settings common ... Browse Code »

    The g_dnl USB settings for the vendor ID, product ID and manufacturer are
    actually common settings that can and should be shared by all the gadgets.

    Make them common by renaming them, and convert all the users.

    Reviewed-by: Simon Glass
    Reviewed-by: Lukasz Majewski
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

28 Aug, 2017

1 commit

15 Aug, 2017

2 commits

12 Aug, 2017

2 commits

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

04 Jun, 2017

1 commit

  • 91d27a17c   Kconfig: Migrate FS_FAT / FAT_WRITE ... Browse Code »

    Now that these symbols are in Kconfig, migrate all users. Use imply on
    a number of platforms that default to having this enabled. As part of
    this we must migrate some straglers for CMD_FAT and DOS_PARTITION.

    Signed-off-by: Tom Rini

    Tom Rini
     

28 Jan, 2017

2 commits

30 Dec, 2016

3 commits

  • 45a68fe26   mmc: move some SDHCI related options to Kconfig ... Browse Code »

    While I moved the options, I also renamed them so that they are all
    prefixed with MMC_SDHCI_.

    This commit was created in the following steps.

    [1] Rename with the following command
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e '
    s/CONFIG_MMC_SDMA/CONFIG_MMC_SDHCI_SDMA/g
    s/CONFIG_BCM2835_SDHCI/CONFIG_MMC_SDHCI_BCM2835/g
    s/CONFIG_KONA_SDHCI/CONFIG_MMC_SDHCI_KONA/g
    s/CONFIG_MV_SDHCI/CONFIG_MMC_SDHCI_MV/g
    s/CONFIG_S5P_SDHCI/CONFIG_MMC_SDHCI_S5P/g
    s/CONFIG_SPEAR_SDHCI/CONFIG_MMC_SDHCI_SPEAR/g
    '

    [2] create the Kconfig entries in drivers/mmc/Kconfig

    [3] Move the options by the following command
    tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \
    MMC_SDHCI_KONA MMC_SDHCI_MV MMC_SDHCI_S5P MMC_SDHCI_SPEAR

    [4] Sort drivers/mmc/Makefile for readability

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     
  • e1ce61fbb   mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI ... Browse Code »

    Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI.
    My motivation for the rename is, ultimately, to make all the MMC
    options prefixed with MMC_ and SDHCI options with MMC_SDHCI_,
    like Linux.

    This commit was created as follows:

    [1] Rename the config option with the following command:
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g'

    [2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig

    [3] run "tools/moveconfig.py -y MMC_SDHCI"

    [4] add "depends on MMC_SDHCI" to existing SDHCI driver entries

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     
  • 187809517   Sync defconfig files by savedefconfig ... Browse Code »

    Generated by "tools/moveconfig -s".

    This will make config moves easier.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

22 Dec, 2016

1 commit

24 Oct, 2016

1 commit

27 Sep, 2016

1 commit

  • 6828e602b   dfu: Migrate to Kconfig ... Browse Code »
    14

    Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for
    CMD_DFU (as we must have the DFU command enabled to do anything DFU).
    Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add
    options for all of the back end choices that DFU can make use of.

    Cc: Lukasz Majewski
    Signed-off-by: Tom Rini
    Acked-by: Lukasz Majewski

    Tom Rini
     

20 Jun, 2016

1 commit

  • 41598c825   autoboot: add CONFIG_AUTOBOOT to allow to not compile autoboot.c ... Browse Code »

    Since commit bb597c0eeb7e ("common: bootdelay: move CONFIG_BOOTDELAY
    into a Kconfig option"), CONFIG_BOOTDELAY is defined for all boards.

    Prior to that commit, it was allowed to unset CONFIG_BOOTDELAY to
    not compile common/autoboot.c, as described in common/Makefile:

    # This option is not just y/n - it can have a numeric value
    ifdef CONFIG_BOOTDELAY
    obj-y += autoboot.o
    endif

    It was a bit odd to enable/disable code with an integer type option,
    but it was how this option worked before that commit, and several
    boards actually unset it to opt out of the autoboot feature.

    This commit adds a new bool option, CONFIG_AUTOBOOT, and makes
    CONFIG_BOOTDELAY depend on it.

    I chose "default y" for this option because most boards use the
    autoboot. I added "# CONFIG_AUTOBOOT is not set" for the boards that
    had not set CONFIG_BOOTDELAY prior to the bad commit.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

26 Apr, 2016

2 commits

20 Apr, 2016

3 commits

26 Mar, 2016

1 commit

  • f9d0fd8a5   usb: gadget: Move CONFIG_USB_GADGET to Kconfig ... Browse Code »

    The description was borrowed from kernel. "tristate" type was changed
    to "bool" (I believe we don't support modules for u-boot yet, right?).
    CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along
    as well.

    Definitions were added to defconfig files in a way that
    "make savedefconfig" generates exactly the same file as used defconfig.

    Signed-off-by: Sam Protsenko
    [trini: Add zynq_zc702 conversion]
    Signed-off-by: Tom Rini

    Sam Protsenko
     

28 Sep, 2015

1 commit