29 Feb, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
05 Dec, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
21 Nov, 2019
2 commits
-
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.Cc: Wolfgang Denk
Cc: Joe Hershberger
Cc: Patrick Delaunay
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Simon Goldschmidt -
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not. In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.Cc: Wolfgang Denk
Cc: Joe Hershberger
Signed-off-by: Tom Rini
13 Nov, 2019
1 commit
-
Move this symbol to Kconfig. As part of this we can drop a UBI-specific
symbol that was a stop-gap for not having this particular symbol in
Kconfig.Signed-off-by: Tom Rini
24 Aug, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_FSL_USDHCSigned-off-by: Adam Ford
[trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list]
Signed-off-by: Tom Rini
23 Jun, 2019
1 commit
-
Converted to use fsl_esdhc_imx for i.MX platforms.
Signed-off-by: Yangbo Lu
Tested-by: Steffen Dirkwinkel
Reviewed-by: Peng Fan
Reviewed-by: Lukasz Majewski
Reviewed-by: Martyn Welch
Acked-by: Jason Liu
26 Mar, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_SF_DEFAULT_BUS
CONFIG_SF_DEFAULT_CS
CONFIG_SF_DEFAULT_MODE
CONFIG_SF_DEFAULT_SPEEDI use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.Signed-off-by: Patrick Delaunay
19 Jan, 2019
1 commit
-
The bounce buffer is used by a few drivers (most of the MMC drivers)
to overcome limitations in their respective DMA implementation.This moves the configuration to Kconfig and makes it user-selectable
(even though it will be a required feature to make those drivers
work): the expected usage is for drivers depending on this to 'select'
it unconditionally from their respective Kconfig (see follow-up
patches).This commit includes a full migration using moveconfig.py to ensure
that each commit compiles. To ensure bisectability we update
dependencies of various drivers to now select BOUNCE_BUFFER when needed.[trini: Squash all patches to ensure bisectability]
Signed-off-by: Tom Rini
Signed-off-by: Philipp Tomsich
Reviewed-by: Otavio Salvador [dw_mmc portion]
Reviewed-by: Fabio Estevam [mxsmmc portion]
Reviewed-by: Simon Glass [tegra portion]
18 Aug, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_MII
CONFIG_DRIVER_TI_EMACSigned-off-by: Adam Ford
Acked-by: Jagan Teki
Acked-by: Joe Hershberger
17 Aug, 2018
1 commit
-
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.Signed-off-by: Tom Rini
28 Apr, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_SPIThis partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver. For now, just update
the CONFIG tests. This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.Signed-off-by: Adam Ford
Signed-off-by: Tom Rini
09 Apr, 2018
1 commit
-
Migrate the CONFIG_FSL_ESDHC option to Kconfig.
Signed-off-by: Mario Six
24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
14 Feb, 2018
1 commit
-
Signed-off-by: Tuomas Tynkkynen
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
08 Sep, 2017
2 commits
-
This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig.
Update defconfigs.Signed-off-by: Chris Packham
Reviewed-by: Simon Glass -
CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on
USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and
LAN78XX options under new menu. Finally update the defconfigs that need
CONFIG_USB_HOST_ETHER.Signed-off-by: Chris Packham
Reviewed-by: Simon Glass
28 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
15 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
09 Aug, 2017
1 commit
-
Reviewed-by: Joe Hershberger
Signed-off-by: Tom Rini
08 Aug, 2017
2 commits
-
Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger -
Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_SPI_FLASHSigned-off-by: Simon Glass
22 May, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_EEPROM
CONFIG_CMD_EEPROM_LAYOUT
CONFIG_EEPROM_LAYOUT_HELP_STRINGSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
[trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
platforms]
Signed-off-by: Tom Rini
26 Jan, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass
24 Jan, 2017
1 commit
-
This option should not really be user selectable. Note that on PowerPC
we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be
conditional on that.Signed-off-by: Tom Rini
Acked-by: Masahiro Yamada (for UniPhier)
22 Jan, 2017
1 commit
-
Cc: Tom Rini
Signed-off-by: Jagan Teki
30 Dec, 2016
1 commit
-
Generated by "tools/moveconfig -s".
This will make config moves easier.
Signed-off-by: Masahiro Yamada
26 Oct, 2016
1 commit
-
- Add DEFAULT_FDT_FILE kconfig entry
- Move CONFIG_DEFAULT_FDT_FILE from include/configs to defconfigsCc: Tom Rini
Cc: Simon Glass
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
10 Sep, 2016
1 commit
-
In some cases we were missing CONFIG_USB=y so enable that when needed.
Reviewed-by: Masahiro Yamada
Signed-off-by: Tom Rini
17 Jun, 2016
1 commit
-
With updated moveconfig.py and an better default, re-generate
the migration of BOOTDELAY to the defconfig.Reviewed-by: Hans de Goede
Signed-off-by: Tom Rini
26 Apr, 2016
3 commits
-
Update the config.h and defconfig files for the commands that 8e3c036
converted over to KconfigSigned-off-by: Tom Rini
-
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND. Due to how we have used this historically
we need to take further care here when converting.Signed-off-by: Tom Rini
-
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove
all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default.Signed-off-by: Tom Rini
15 Mar, 2016
2 commits
-
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.Move these options to Kconfig and tidy up board configuration:
CONFIG_FIT
CONFIG_OF_BOARD_SETUP
CONFIG_OF_SYSTEM_SETUP
CONFIG_FIT_SIGNATURE
CONFIG_FIT_BEST_MATCH
CONFIG_FIT_VERBOSE
CONFIG_OF_STDOUT_VIA_ALIAS
CONFIG_RSAUnfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.Note: Masahiro's moveconfig.py script is amazing.
Signed-off-by: Simon Glass
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini -
Move this option to Kconfig and tidy up existing boards.
Signed-off-by: Simon Glass
25 Nov, 2015
1 commit
-
There are already Kconfig options for SPI flash drivers, but we
have not moved them from config.h to defconfig files. This commit
does this in a batch.Signed-off-by: Bin Meng