28 Jan, 2020
1 commit
-
This can be used for device tree size reduction similar as
CONFIG_OF_SPL_REMOVE_PROPS option. Some boards must pass the
built-in DTB unchanged to the kernel, thus we may not cut it
down unconditionally. Therefore enable the property removal
list option only if CONFIG_OF_DTB_PROPS_REMOVE is selected.Signed-off-by: Anatolij Gustschin
16 Jan, 2020
1 commit
-
Some features implicitly depended on MALLOC_F and OF_LIBFDT and would
fail at link-time if these features were not enabled.Signed-off-by: Sean Anderson
08 Jan, 2020
1 commit
-
If u-boot.img is a FIT image, CONFIG_OF_OVERLAY_LIST can be used to add
DT overlays to u-boot.img.Signed-off-by: Jean-Jacques Hiblot
Reviewed-by: Simon Glass
31 Oct, 2019
2 commits
-
This choice is not about SPL for which we have a separate choice.
Fixes: 95f4bbd581 ("lib: fdt: Allow LZO and GZIP DT compression in U-Boot")
Cc: Marek Vasut
Signed-off-by: Baruch Siach -
As initially this feature was implemented as a negative CONFIG and
later it was redesigned to be positive the help text should be
updated to reflect this change.This commit updates the help text to match the current implementation.
Signed-off-by: Walter Lozano
Reviewed-by: Simon Glass
12 Apr, 2019
1 commit
-
interrupt-parent property is removed already that's why there is no
reason to keep interrupts property if parent doesn't exist.Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
10 Apr, 2019
1 commit
-
Add required Kconfig symbols, Makefile bits and macro fixes in a
few places to support LZO and DT compression in U-Boot. This can
save a lot of space with multi-DTB fitImages.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Cc: Simon Glass
Cc: Tom RiniSigned-off-by: Marek Vasut
10 Feb, 2019
1 commit
-
Improve some things in the documentation of OF_PLATDATA that I found
while porting socfgpa_gen5 to it.Signed-off-by: Simon Goldschmidt
Reviewed-by: Simon Glass
17 Aug, 2018
1 commit
-
Fix typo in Kconfig description.
Signed-off-by: Michal Simek
30 Jul, 2018
1 commit
-
Remove additional trailing whitespaces in prompt reported by kconfiglib:
warning: DM_PMIC_SANDBOX (defined at drivers/power/pmic/Kconfig:133) has
leading or trailing whitespace in its prompt
warning: (defined at dts/Kconfig:204) has leading or trailing
whitespace in its promptSigned-off-by: Michal Simek
Reviewed-by: Felix Brack
11 Jul, 2018
1 commit
-
Add support for loading U-Boot on the Broadcom 7445 SoC. This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.Signed-off-by: Thomas Fitzsimmons
Cc: Stefan Roese
Cc: Tom Rini
Cc: Florian Fainelli
17 Nov, 2017
1 commit
-
Currently, pylibfdt is always compiled if swig is installed on your
machine. It is really annoying because most of targets (excepts
x86, sunxi, rockchip) do not use dtoc or binman."checkbinman" and "checkdtoc" are wrong. It is odd that the final
build stage checks if we have built necessary tools. If your platform
depends on dtoc/binman, you must be able to build pylibfdt. If swig
is not installed, it should fail immediately.I added PYLIBFDT, DTOC, BINMAN entries to Kconfig. They should be
property select:ed by platforms that need them. Kbuild will descend
into scripts/dtc/pylibfdt/ only when CONFIG_PYLIBFDT is enabled.Signed-off-by: Masahiro Yamada
Reviewed-by: Simon Glass
06 Oct, 2017
2 commits
-
u-boot can be embedded within a FIT image with multiple DTBs. It then
selects at run-time which one is best suited for the platform.
Use the same principle here for the SPL: put the DTBs in a FIT image,
compress it (LZO, GZIP, or no compression) and append it at the end of the
SPL.Signed-off-by: Jean-Jacques Hiblot
[trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the
default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c
it's unused.]
Signed-off-by Tom Rini -
CONFIG_FIT_EMBED might be confused with CONFIG_OF_EMBED, rename it
MULTI_DTB_FIT as it is able to get a DTB from a FIT image containing
multiple DTBs. Also move the option to the Kconfig dedicated to the DTS
options and create a README for this feature.Signed-off-by: Jean-Jacques Hiblot
Reviewed-by: Tom Rini
Reviewed-by: Simon Glass
24 Sep, 2017
2 commits
-
In some cases, such as FreeBSD, the path to an alternative dtc needs to
be used. Rather than override the one given in the Makefile on the
command line, make this part of the build configuration.Signed-off-by: Tom Rini
-
This makes us act like the Linux Kernel does and allow for dtc to be
provided externally but otherwise we use the version of dtc that is
included in the sources. This in turn means that we can drop the
checkdtc logic. We select DTC in the cases where we will need the dtc
tool provided.Signed-off-by: Tom Rini
13 Aug, 2017
1 commit
-
For the RK3368, we want to use OF_PLATDATA in TPL, but full OF_CONTROL
in SPL: this requires the introduction of a new family of
configuration options to decouple SPL_OF_CONTROL and SPL_OF_PLATDATA
from TPL.Consequently, Makefile.spl needs to be adjusted to test for these
configuration items through the $(SPL_TPL_) macro instead of
hard-coding the SPL variant.Signed-off-by: Philipp Tomsich
Reviewed-by: Simon Glass
Reviewed-by: Tom Rini
11 Jul, 2017
1 commit
-
OF_LIST will be useable by SPL and U-boot. Therefore, update its
dependency to allow it to be enable by either SPL or U-boot specific
config option.Signed-off-by: Franklin S Cooper Jr
Reviewed-by: Tom Rini
Reviewed-by: Lokesh Vutla
Acked-by: Andrew F. Davis
01 Jun, 2017
1 commit
-
Add a Kconfig option to enable a live device tree, built at run time from
the flat tree. Also add structure definitions and a root node.Signed-off-by: Simon Glass
10 May, 2017
1 commit
-
In some boards like the Raspberry Pi the initial bootloader will pass
a DT to the kernel. When using U-Boot as such kernel, the board code in
U-Boot should be able to provide U-Boot with this, already assembled
device tree blob.This patch introduces a new config option CONFIG_OF_BOARD to use instead
of CONFIG_OF_EMBED or CONFIG_OF_SEPARATE which will initialize the DT
from a board-specific funtion instead of bundling one with U-Boot or as
a separated file. This allows boards like the Raspberry Pi to reuse the
device tree passed from the bootcode.bin and start.elf firmware
files, including the run-time selected device tree overlays.Signed-off-by: Alex Deymo
Reviewed-by: Simon Glass
05 Apr, 2017
1 commit
-
This patch replaces SPL_PINCTRL_FULL with SPL_PINCNTRL. It is to avoid removal
of pin control properties in case of SPL_PINCTRL. No impact in case of
SPL_PINCTRL_FULL as it depends on SPL_PINCTRL.Signed-off-by: Vikas Manocha
Reviewed-by: Simon Glass
23 Mar, 2017
1 commit
-
Certain boards come in different variations by way of utilizing daughter
boards, for example. These boards might contain additional chips, which
are added to the main board's busses, e.g. I2C.The device tree support for such boards would either, quite naturally,
employ the overlay mechanism to add such chips to the tree, or would use
one large default device tree, and delete the devices that are actually
not present.Regardless of approach, even on the U-Boot level, a modification of the
device tree is a prerequisite to have such modular families of boards
supported properly.Therefore, we add an option to make the U-Boot device tree (the actual
copy later used by the driver model) writeable, and add a callback
method that allows boards to modify the device tree at an early stage,
at which, hopefully, also the application of device tree overlays will
be possible.Signed-off-by: Mario Six
Reviewed-by: Simon Glass
Signed-off-by: Stefan Roese
15 Jul, 2016
1 commit
-
Add a Kconfig option to enable this feature.
Signed-off-by: Simon Glass
23 May, 2016
1 commit
-
OF_LIST can't remain empty that's why setup it up to default DTB.
If it is empty u-boot.img is created without FDT partition:
For example:
./tools/mkimage -f auto -A arm -T firmware -C none -O u-boot -a
0x8000000 -e 0 -n "U-Boot 2016.05-rc3 ..." -E -b -d u-boot-nodtb.bin u-boot.img
Can't set 'timestamp' property for '' node (FDT_ERR_NOSPACE)
FIT description: Firmware image with one or more FDT blobs
Created: Wed May 4 15:02:52 2016
Image 0 (firmware@1)
Description: U-Boot 2016.05-rc3-00080-gff2e12ae22a8-dirty for zynqmp
board
Created: Wed May 4 15:02:52 2016
Type: Firmware
Compression: uncompressed
Data Size: unavailable
Architecture: ARM
Load Address: 0x08000000
Default Configuration: 'conf@1'
Configuration 0 (conf@1)
Description: unavailable
Kernel: unavailableAnd then image like this doesn't contain description and link to FDT and
can't boot.Signed-off-by: Michal Simek
Reviewed-by: Tom Rini
15 Mar, 2016
2 commits
-
When building a FIT, more than one device tree can be included. The board
can select (at run-time) the one that it wants.Add a Kconfig option to allow the list of devices trees (supported by the
board) to be specified.When using SPL_LOAD_FIT, build u-boot.img in FIT format instead of the
legacy image format. Include all the listed device tree files in this FIT.Signed-off-by: Simon Glass
-
This option has no meaning without OF_CONTROL, so add a dependency.
Signed-off-by: Simon Glass
25 Feb, 2016
1 commit
-
These two properties are necessary for SPL to get clocks from DT.
Note:
For now, only clock look-up by index is supported (clk_get_by_index()
function), so "clock-names" is never parsed in U-Boot. However, we
may want to support something like clk_get_by_name() in the future,
so let's keep "clock-names" as well as "clocks".Signed-off-by: Masahiro Yamada
03 Oct, 2015
1 commit
-
This comment from README.fdt-control did not end up in the Kconfig, which
is what most people will see. Add it with a few tweaks.Signed-off-by: Simon Glass
Acked-by: Michal Simek
17 Sep, 2015
1 commit
-
These properties are necessary to use full-featured pinctrl drivers
in SPL.Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
31 Aug, 2015
1 commit
-
This should depend on SPL_OF_CONTROL (it is not equivalent to
SPL && OF_CONTROL).Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
19 Aug, 2015
1 commit
-
As we discussed a couple of times, negative CONFIG options make our
life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ...
and here is another one.Now, there are three boards enabling OF_CONTROL on SPL:
- socfpga_arria5_defconfig
- socfpga_cyclone5_defconfig
- socfpga_socrates_defconfigThis commit adds CONFIG_SPL_OF_CONTROL for them and deletes
CONFIG_SPL_DISABLE_OF_CONTROL from the other boards to invert
the logic.Signed-off-by: Masahiro Yamada
Reviewed-by: Tom Rini
Reviewed-by: Simon Glass
22 Jul, 2015
1 commit
-
The SPL device tree size must be minimised to save memory. Only include
properties that are needed by SPL - this is determined by the presence
of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of
unused properties from the nodes that remain.Signed-off-by: Simon Glass
23 Apr, 2015
1 commit
-
Some boards cannot support device tree due to lack of memory. Add an option
to allow these boards to continue to work (and even use driver model).
This is a 'negative' option since most boards are expected to support device
tree in SPL.Signed-off-by: Simon Glass
25 Feb, 2015
1 commit
-
Now CONFIG_SPL_BUILD is not defined in Kconfig, so
"!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant.Signed-off-by: Masahiro Yamada
28 Oct, 2014
1 commit
-
Signed-off-by: Robert P. J. Day
25 Sep, 2014
2 commits
-
This option specifies the default Device Tree used for the run-time
configuration of U-Boot.Signed-off-by: Masahiro Yamada
Cc: Simon Glass
Cc: Stephen Warren
Cc: Minkyu Kang
Cc: Michal Simek -
This commit moves:
CONFIG_OF_CONTROL
CONFIG_OF_SEPARATE
CONFIG_OF_EMBED
CONFIG_OF_HOSTFILEBecause these options are currently not supported for SPL,
the "Device Tree Control" menu does not appear in the SPL
configuration.Note:
zynq-common.h should be adjusted so as not to change the
default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME.Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
Cc: Stephen Warren
Cc: Minkyu Kang
Acked-by: Michal Simek