Eric Lee / smarc-uboot

30 Mar, 2020

1 commit

23 Jan, 2020

1 commit

04 Dec, 2019

1 commit

21 Nov, 2019

1 commit

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     

26 Aug, 2019

1 commit

25 Feb, 2019

1 commit

07 Feb, 2019

1 commit

  • 6d8251783   configs: Don't use SPI_FLASH_BAR as default ... Browse Code »
    12

    Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
    don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
    4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
    renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
    not break functionality.

    Signed-off-by: Vignesh R
    Tested-by: Simon Goldschmidt
    Tested-by: Stefan Roese
    Tested-by: Horatiu Vultur
    Reviewed-by: Jagan Teki
    Tested-by: Jagan Teki #zynq-microzed

    Vignesh R
     

20 Oct, 2018

1 commit

04 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

20 May, 2018

1 commit

  • e9c891ff9   ARM: rmobile: Update V2H Blanche ... Browse Code »

    The V2H Blanche port was broken since some time. This patch updates
    the V2H Blanche port to use modern frameworks, DM, DT probing, SPL
    for the preloading and puts it on par with the M2 Porter board.

    Signed-off-by: Marek Vasut
    Cc: Nobuhiro Iwamatsu

    Marek Vasut
     

02 May, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

28 Jan, 2018

1 commit

25 Jan, 2018

1 commit

21 Oct, 2017

1 commit

  • 8daec2d9d   net: Add SMC911X driver to Kconfig, convert ... Browse Code »

    We add the various SMC91XX symbols to drivers/net/Kconfig and then this
    converts the following to Kconfig:
    CONFIG_SMC911X
    CONFIG_SMC911X_BASE
    CONFIG_SMC911X_16_BIT
    CONFIG_SMC911X_32_BIT

    Signed-off-by: Adam Ford
    [trini: Apply to the rest of the tree, re-squash old and new patch]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

12 Aug, 2017

1 commit

03 Aug, 2017

1 commit

  • 03a38a397   serial: sh: Convert to Kconfig ... Browse Code »

    Convert the SH Serial to Kconfig using tools/moveconfig.py tool
    and a bit of manual adjustment to cater for failed conversions.

    Signed-off-by: Marek Vasut
    Cc: Nobuhiro Iwamatsu
    Signed-off-by: Nobuhiro Iwamatsu

    Marek Vasut
     

26 Jul, 2017

1 commit

19 Jun, 2017

1 commit

15 May, 2017

1 commit

  • 67e09e248   blanche_defconfig: enable CONFIG_MMC ... Browse Code »

    As commit 54925327fa11 ("mmc: move CONFIG_GENERIC_MMC to Kconfig")
    addressed, this is one of the last weird defconfigs that define
    CONFIG_GENERIC_MMC without CONFIG_MMC.

    Now I took a closer look at this. Given that both CONFIG_CMD_MMC
    and CONFIG_GENERIC_MMC are set for this defconfig, CONFIG_MMC should
    be enabled.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

08 Apr, 2017

1 commit

20 Mar, 2017

1 commit

13 Feb, 2017

1 commit

  • e856bdcfb   flash: complete CONFIG_SYS_NO_FLASH move with renaming ... Browse Code »
    20

    We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
    not completed. Finish this work by the tool.

    During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
    Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
    than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
    make the code more readable. Besides, negative meaning symbols do
    not fit in obj-$(CONFIG_...) style Makefiles.

    This commit was created as follows:

    [1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

    [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

    [3] Rename the instances in defconfigs by the following:
    find . -path './configs/*_defconfig' | xargs sed -i \
    -e '/CONFIG_SYS_NO_FLASH=y/d' \
    -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

    [4] Change the conditionals by the following:
    find . -name '*.[ch]' | xargs sed -i \
    -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
    -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
    -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
    -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

    [5] Modify the following manually
    - Rename the rest of instances
    - Remove the description from README
    - Create the new Kconfig entry in drivers/mtd/Kconfig
    - Remove the old Kconfig entry from common/Kconfig
    - Remove the garbage comments from include/configs/*.h

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

31 Jan, 2017

1 commit

  • 54925327f   mmc: move CONFIG_GENERIC_MMC to Kconfig ... Browse Code »
    40

    Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.

    Let's create an entry for "config GENERIC_MMC" with "default MMC",
    then convert all macro defines in headers to Kconfig. Almost all
    of the defines will go away.

    I see only two exceptions:
    configs/blanche_defconfig
    configs/sandbox_noblk_defconfig

    They define CONFIG_GENERIC_MMC, but not CONFIG_MMC. Something
    might be wrong with these two boards, so should be checked later.

    Anyway, this is the output of the moveconfig tool.

    This commit was created as follows:

    [1] create a config entry in drivers/mmc/Kconfig

    [2] tools/moveconfig.py -r HEAD GENERIC_MMC

    [3] manual clean-up of garbage comments in doc/README.* and
    include/configs/*.h

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini

    Masahiro Yamada
     

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

10 Sep, 2016

1 commit

17 Aug, 2016

2 commits