04 Sep, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
18 Aug, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_MII
CONFIG_DRIVER_TI_EMACSigned-off-by: Adam Ford
Acked-by: Jagan Teki
Acked-by: Joe Hershberger
17 Aug, 2018
1 commit
-
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.Signed-off-by: Tom Rini
28 Apr, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_SPIThis partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver. For now, just update
the CONFIG tests. This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.Signed-off-by: Adam Ford
Signed-off-by: Tom Rini
09 Apr, 2018
1 commit
-
Migrate the CONFIG_FSL_ESDHC option to Kconfig.
Signed-off-by: Mario Six
24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
14 Feb, 2018
1 commit
-
Signed-off-by: Tuomas Tynkkynen
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
29 Dec, 2017
2 commits
-
Currently the MX6SL option is selected via CONFIG_SYS_EXTRA_OPTIONS,
but it is better to select it directly via Kconfig.Signed-off-by: Breno Lima
Reviewed-by: Fabio Estevam
Reviewed-by: Peng Fan -
In order to provide a consistent user experience for imx board users,
remove the custom CONFIG_BOOTDELAY values from defconfig files, so that
all boards can use the default two second delay.Signed-off-by: Fabio Estevam
Reviewed-by: Lukasz Majewski
31 Oct, 2017
1 commit
-
When CONFIG_DM_MMC=y, CONFIG_BLK should be selected, otherwise the
SD/eMMC card cannot be used.Also, select CONFIG_DM_USB=y when CONFIG_USB=y to avoid build failure.
Tested on mx6slevk, mx7dsabresd and mx6ullevk.
Signed-off-by: Fabio Estevam
Reviewed-by: Jaehoon Chung
Tested-by: Adam Ford
Tested-by: Sébastien Szymanski
Tested-by: Jagan Teki
Reviewed-by: Jagan Teki
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
08 Sep, 2017
2 commits
-
This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig.
Update defconfigs.Signed-off-by: Chris Packham
Reviewed-by: Simon Glass -
CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on
USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and
LAN78XX options under new menu. Finally update the defconfigs that need
CONFIG_USB_HOST_ETHER.Signed-off-by: Chris Packham
Reviewed-by: Simon Glass
28 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
17 Aug, 2017
1 commit
-
Now that the driver supports it, move these boards over to use driver
model fully for MMC.Signed-off-by: Simon Glass
15 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
08 Aug, 2017
1 commit
-
Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_SPI_FLASHSigned-off-by: Simon Glass
30 Apr, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_BMODESigned-off-by: Simon Glass
[trini: Make this default y and depend on mx5/6/7]
Signed-off-by: Tom Rini
21 Mar, 2017
3 commits
-
Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO
enabled. So needs to enable them together.DM FEC and SPI are not enabled, but they use gpio in board code.
So use gpio_request first to request the gpio, because DM_GPIO
is enabled.Signed-off-by: Peng Fan
Cc: Stefano Babic -
Introduce device tree support.
dts from kernel commit c4f3f22edd Merge tag 'linux-kselftest-4.11-rc1'Signed-off-by: Peng Fan
Cc: Stefano Babic -
Use SPI_BOOT instead of SYS_BOOT_SPINOR.
Signed-off-by: Peng Fan
Cc: Stefano Babic
26 Jan, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass
10 Sep, 2016
1 commit
-
In some cases we were missing CONFIG_USB=y so enable that when needed.
Reviewed-by: Masahiro Yamada
Signed-off-by: Tom Rini
17 Jun, 2016
1 commit
-
With updated moveconfig.py and an better default, re-generate
the migration of BOOTDELAY to the defconfig.Reviewed-by: Hans de Goede
Signed-off-by: Tom Rini
26 Apr, 2016
3 commits
-
Update the config.h and defconfig files for the commands that 8e3c036
converted over to KconfigSigned-off-by: Tom Rini
-
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND. Due to how we have used this historically
we need to take further care here when converting.Signed-off-by: Tom Rini
-
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove
all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default.Signed-off-by: Tom Rini
15 Mar, 2016
1 commit
-
Move this option to Kconfig and tidy up existing boards.
Signed-off-by: Simon Glass
25 Nov, 2015
1 commit
-
There are already Kconfig options for SPI flash drivers, but we
have not moved them from config.h to defconfig files. This commit
does this in a batch.Signed-off-by: Bin Meng
19 Nov, 2015
1 commit
-
Add CMD_GPIO to Kconfig and run tools/moveconfig.py .
Signed-off-by: Thomas Chou
Reviewed-by: Simon Glass
02 Sep, 2015
1 commit
-
Move TARGET_xx Kconfig option based on mx6 to arch/arm/cpu/armv7/mx6/Kconfig.
Add enable "CONFIG_ARCH_MX6" for boards based on mx6.
Then we can choose target boards using "make ARCH=arm menuconfig"
with ARCH_MX6 defined.If using original way, we have no chance to enable ARCH_MX6 when
"make menuconfig". Even define CONFIG_ARCH_MX6=y in xx_defconfig,
kconfig will complains "arch/../configs/platinum_titanium_defconfig:3:
warning: override: TARGET_PLATINUM_TITANIUM changes choice state"Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Heiko Schocher
Cc: Tim Harvey
Cc: Eric Bénard
Cc: Fabio Estevam
Cc: Eric Nelson
Cc: Marek Vasut
Cc: Christian Gmeiner
Cc: Stefan Roese
Cc: Soeren Moch
Cc: Otavio Salvador
Acked-by: Stefano Babic
Acked-by: Soeren Moch
Acked-by: Otavio Salvador
Acked-by: Christian Gmeiner
26 Jun, 2015
2 commits
-
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.Signed-off-by: Joe Hershberger
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini -
Some archs/boards specify their own default by pre-defining the config
which causes the Kconfig system to mix up the order of the configs in
the defconfigs... This will cause merge pain if allowed to proliferate.Remove the configs that behave this way from the archs.
A few configs still remain, but that is because they only exist as
defaults and do not have a proper Kconfig entry. Those appear to be:SPIFLASH
DISPLAY_BOARDINFOSigned-off-by: Joe Hershberger
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
Signed-off-by: Tom Rini
01 Jun, 2015
1 commit
-
This also selects CONFIG_NET for any CONFIG_CMD_NET board.
Remove the imx default for CONFIG_NET.
This moves the config that was defined by 60296a8 (commands: add more
command entries in Kconfig).Signed-off-by: Joe Hershberger
13 May, 2015
1 commit
-
In order to reduce merge conflicts and to maintain the simplest possible
defconfig files, we should be using the savedefconfig feature of Kconfig
every time a new feature is added. This keeps the defconfig settings to
a minimum (only those things not default) and keeps them in the same
order as the Kconfig options.Signed-off-by: Joe Hershberger
Cc: Masahiro Yamada
Acked-by: Stephen Warren
Cc: Tom Rini
23 Mar, 2015
1 commit
-
This patch is to support reading temperature for mx6slevk board.
Signed-off-by: Peng Fan
31 Dec, 2014
1 commit
-
Add spi nor boot support for mx6slevk board.
Signed-off-by: Peng Fan
Reviewed-by: Jagannadha Sutradharudu Teki