26 Mar, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_SF_DEFAULT_BUS
CONFIG_SF_DEFAULT_CS
CONFIG_SF_DEFAULT_MODE
CONFIG_SF_DEFAULT_SPEEDI use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.Signed-off-by: Patrick Delaunay
18 Aug, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_MII
CONFIG_DRIVER_TI_EMACSigned-off-by: Adam Ford
Acked-by: Jagan Teki
Acked-by: Joe Hershberger
11 Jul, 2018
1 commit
-
This patch moves CONFIG_MP to Kconfig
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
15 May, 2018
1 commit
-
The CONFIG_PHY_MARVELL has already been migrated to Kconfig (some boards
already had it in their Kconfig), but had not been moved for older
boards.Move it to the defconfigs for all boards.
Signed-off-by: Mario Six
Acked-by: Joe Hershberger
28 Apr, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_SPIThis partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver. For now, just update
the CONFIG tests. This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.Signed-off-by: Adam Ford
Signed-off-by: Tom Rini
09 Apr, 2018
4 commits
-
Migrate the CONFIG_FSL_ESDHC option to Kconfig.
Signed-off-by: Mario Six
-
Migrate the CONFIG_TSEC_ENET option to Kconfig.
Signed-off-by: Mario Six
-
Migrate the CONFIG_LAST_STAGE_INIT option to Kconfig.
Signed-off-by: Mario Six
-
Migrate the CONFIG_BOARD_EARLY_INIT_R option to Kconfig.
Signed-off-by: Mario Six
16 Mar, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_CONS_INDEXWe have existing entries for this option in a number of places, with
different guards on them. They're also sometimes used for things not
directly inside of the serial driver. First, introduce a new symbol to
guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
need this for the serial driver, but for some other use, we can still do
it. Next, consolidate all of these into the single entry in
drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that
we can imply a correct value here to make the defconfig side of this
smaller.Signed-off-by: Adam Ford
[trini: Rework a lot of the logic here, such that I took authorship from
Adam, but kept his S-o-B line]
Signed-off-by: Tom Rini
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
13 Dec, 2017
1 commit
-
Use 'imply' here liberally to avoid the combinatorial explosion of
defconfig changes in the PowerPC boards.Signed-off-by: Tuomas Tynkkynen
31 Oct, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
28 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
15 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
12 Aug, 2017
2 commits
-
This patch converts CONFIG_CMD_REGINFO to Kconfig
Signed-off-by: Christophe Leroy
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich -
This converts the following to Kconfig:
CONFIG_CMD_PCISigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
08 Aug, 2017
1 commit
-
Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHEREIn fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC
And then manual updates. This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.Signed-off-by: Simon Glass
Signed-off-by: Tom Rini
12 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_SATASigned-off-by: Simon Glass
Reviewed-by: Bin Meng
23 May, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_HASHSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
[trini: Rework slightly, enable on some boards again]
Signed-off-by: Tom Rini
22 May, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_EEPROM
CONFIG_CMD_EEPROM_LAYOUT
CONFIG_EEPROM_LAYOUT_HELP_STRINGSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
[trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
platforms]
Signed-off-by: Tom Rini
30 Apr, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_BMPSigned-off-by: Simon Glass
[trini: Add depends on LCD || DM_VIDEO || VIDEO]
Signed-off-by: Tom Rini
26 Jan, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass
24 Oct, 2016
3 commits
-
This converts the following to Kconfig:
CONFIG_VIDEO_SW_CURSORSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
[trini: Re-convert, find all the cases where this is off]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_IS_IN_ENV
CONFIG_CONSOLE_MUXSigned-off-by: Simon Glass
[trini: Re-order, re-migrate]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_VIDEOSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
Reviewed-by: Jagan Teki
12 Oct, 2016
1 commit
-
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default
in certain architectures. Migrate all config files.Signed-off-by: Lokesh Vutla
Signed-off-by: Tom Rini
20 Sep, 2016
1 commit
-
Move the config IDENT_STRING to Kconfig and migrate all boards
[sivadur: Migrate zynq boards]
Signed-off-by: Siva Durga Prasad Paladugu
[trini: Update configs, add some default to sunxi Kconfig]
Signed-off-by: Tom Rini
10 Sep, 2016
1 commit
-
In some cases we were missing CONFIG_USB=y so enable that when needed.
Reviewed-by: Masahiro Yamada
Signed-off-by: Tom Rini
05 Aug, 2016
1 commit
-
We need to ensure that CONFIG_PHYS_64BIT is configured via Kconfig so
that it is always available to the build system. Otherwise we can run
into cases where we have inconsistent sizes of certain attributes.Ravi Babu reported offset mismatch of struct dwc3 across files since
commit 95ebc253e6d4 ("types.h: move and redefine resource_size_t").
Since the commit, resource_addr_t points to phys_addr_t, whose size
is dependent on CONFIG_PHYS_64BIT for ARM architecture.I tried my best to use "select" where possible (for example, ARMv8
architecture) because I think this kind of option is generally user-
unconfigurable. However, I see some of PowerPC boards have 36BIT
defconfigs as well as 32BIT ones. I moved CONFIG_PHYS_64BIT to the
defconfigs for such boards.CONFIG_36BIT is no longer referenced, so all of the defines were
removed from CONFIG_SYS_EXTRA_OPTIONS.Fixes: 95ebc253e6d4 ("types.h: move and redefine resource_size_t")
Signed-off-by: Masahiro Yamada
Reported-by: Ravi Babu
Acked-by: Stefan Roese
Reviewed-by: Tom Rini
Reviewed-by: York Sun
10 Jun, 2016
1 commit
-
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.Signed-off-by: Heiko Schocher
Reviewed-by: Tom Rini
Acked-by: Viresh Kumar
Acked-by: Igor Grinberg
26 Apr, 2016
3 commits
-
Update the config.h and defconfig files for the commands that 8e3c036
converted over to KconfigSigned-off-by: Tom Rini
-
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND. Due to how we have used this historically
we need to take further care here when converting.Signed-off-by: Tom Rini
-
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove
all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default.Signed-off-by: Tom Rini
15 Mar, 2016
2 commits
-
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.Move these options to Kconfig and tidy up board configuration:
CONFIG_FIT
CONFIG_OF_BOARD_SETUP
CONFIG_OF_SYSTEM_SETUP
CONFIG_FIT_SIGNATURE
CONFIG_FIT_BEST_MATCH
CONFIG_FIT_VERBOSE
CONFIG_OF_STDOUT_VIA_ALIAS
CONFIG_RSAUnfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.Note: Masahiro's moveconfig.py script is amazing.
Signed-off-by: Simon Glass
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini -
Move this option to Kconfig and tidy up existing boards.
Signed-off-by: Simon Glass
25 Nov, 2015
2 commits
-
There are already Kconfig options for SPI flash drivers, but we
have not moved them from config.h to defconfig files. This commit
does this in a batch.Signed-off-by: Bin Meng
-
There are already Kconfig options for SPI drivers, but we
have not moved them from config.h to defconfig files. This
commit does this in a batch.Signed-off-by: Bin Meng