09 Aug, 2019
3 commits
-
Update the configs on iMX8QM MEK board to enable PCIE IMX DM driver.
Users can use "pci enum" command to enumerate the devices.Signed-off-by: Ye Li
-
When CI_UDC DM driver is enabled in SPL, it must enable EHCI host. Then when
building SPL DM USB host, the usb_hub.c requires to enable SPL ENV.
The imx8qxp fspi config save ENV in MMC due to fspi can't write when running with M4.
But MMC driver is not enabled in fspi SPL, so the build was broken.
Fix the issue by adding CONFIG_SPL_ENV_IS_NOWHERE to all defconfig with SPL ENV
is enabled.Signed-off-by: Ye Li
-
Enable the configs of usb2 so that both usb2 and usb3 gadget
drivers are now supported on imx8 plaform. And add
CONFIG_USB_PORT_AUTO to support usb port autodetect function
for SDP/fastboot.Signed-off-by: Sherry Sun
28 Jun, 2019
1 commit
-
Add CONFIG_DM_USB_GADGET and CONFIG_SPL_DM_USB_GADGET flag on i.MX8QM
and QXP to support DM USB gadget driver.Signed-off-by: Sherry Sun
24 May, 2019
6 commits
-
As the M4 use different DDR memory size in normal android/car2 and car
image, use different defconfig for car2 to decrease DDR memory
reservation. So memory reserved for each M4 core is 8MB in car2 and
normal android image. it's 32MB for car image.Change-Id: Idf608f539cd614a154c78e3a1af28eff1da5c1f2
Signed-off-by: Zhang Bo
Signed-off-by: Ye Li -
Enable the SPL SDP driver and FASTBOOT driver in MEK board defconfigs
Signed-off-by: Ye Li
-
Update MEK SPL configs to enable SPL NOR support and change ENV to
SD as default.Signed-off-by: Ye Li
Reviewed-by: Peng Fan -
To support booting from SD/eMMC and flexspi from SPL, update relevant
configurations, like SPL base address, runtime memory address, SPL
load offset, etc.Also enable relevant SPL driver for SD/eMMC boot and flexspi boot,
remove useless driver to save SPL size.Signed-off-by: Ye Li
-
Added default environment for hdp loading.
Added hdp loading as default for iMX8QM ARM2 and MEK boards.Signed-off-by: Oliver Brown
(cherry picked from commit 432e5b4347841095c3b5a8a0d106f35deadd006e)
(cherry picked from commit cb78a32fa8eb8c37932be003ebe4fa1f8c46c1d5) -
Add board codes and defconfig file for iMX8QM MEK board. Support
peripherals: UART, USB host, Flexspi, SD/eMMC, ENET, LVDS display,
i2c.Signed-off-by: Ye Li
