07 May, 2018
1 commit
-
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.Signed-off-by: Tom Rini
09 Feb, 2018
1 commit
-
config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE
based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to
Kconfig allows us to drastically shrink the logic in
config_fallbacks.hSigned-off-by: Adam Ford
[trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE]
Signed-off-by: Tom Rini
16 Oct, 2017
1 commit
-
The test and info callbacks into the partition callback struct are
used by the "part list" command on the command line. That command
is used by the distro script.With verb=1 set, "part list" thus throws a lot of warnings about
partitions it can't find when an upper layer searches for partitions.So let's reduce verbosity to bring it to the same level of noise
as the other partition targets.Signed-off-by: Alexander Graf
27 Aug, 2017
1 commit
-
When using ISO partitions with a DMA enabled block device driver
reading the ISO partition leads to unaligned DMA operations:
CACHE: Misaligned operation at range [bffb7da8, bffb85a8]Align the buffer to make sure we pass a buffer which works for
DMA operations.Signed-off-by: Stefan Agner
Reviewed-by: Bin Meng
02 Oct, 2016
2 commits
-
In both DOS and ISO partition tables the same code to create partition name
like "hda1" was repeated.Code moved to into a new function part_set_generic_name() in part.c and optimized.
Added recognition of MMC and SD types, name is like "mmcsda1".Signed-off-by: Petr Kulhavy
Reviewed-by: Tom Rini
Acked-by: Steve Rae
Reviewed-by: Simon Glass -
So far partition search by name has been supported only on the EFI partition
table. This patch extends the search to all partition tables.Rename part_get_info_efi_by_name() to part_get_info_by_name(), move it from
part_efi.c into part.c and make it a generic function which traverses all part
drivers and searches all partitions (in the order given by the linked list).For this a new variable struct part_driver.max_entries is added, which limits
the number of partitions searched. For EFI this was GPT_ENTRY_NUMBERS.
Similarly the limit is defined for DOS, ISO, MAC and AMIGA partition tables.Signed-off-by: Petr Kulhavy
Reviewed-by: Tom Rini
Acked-by: Steve Rae
23 Jul, 2016
1 commit
-
Partitions on the iso el torito partition table interpreter
only start from partition 1. So when printing out the tables,
let's also start counting at 1.Signed-off-by: Alexander Graf
19 Apr, 2016
3 commits
-
Real CD-ROMs are pretty obsolete these days. Usually people still keep
iso files around, but just put them on USB sticks or SD cards and expect
them to "just work".To support this use case with El Torito images, add support for 512 byte
sector size to the iso parsing code.Signed-off-by: Alexander Graf
-
The generic partition code treats partition 0 as "whole disk". So
we should start with partition 1 as the first partition in the iso
partition table.Signed-off-by: Alexander Graf
-
The iso partition table implementation has a few endian and 64bit
problems. Clean it up a bit to become endian and bitness safe.Signed-off-by: Alexander Graf
23 Mar, 2016
1 commit
-
One of these is causing a coverity warning. Drop these functions and use the
standard U-Boot ones instead.Reported-by: Coverity (CID: 138499)
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
15 Mar, 2016
6 commits
-
Rename these functions so that part_ is at the start. This more clearly
identifies these functions as partition functions.Signed-off-by: Simon Glass
-
To ease conversion to driver model, add helper functions which deal with
calling each block device method. With driver model we can reimplement these
functions with the same arguments.Use inline functions to avoid increasing code size on some boards.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Tested-by: Stephen Warren -
This is a device number, and we want to use 'dev' to mean a driver model
device. Rename the member.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Tested-by: Stephen Warren -
Rename three partition functions so that they start with part_. This makes
it clear what they relate to.Signed-off-by: Simon Glass
Tested-by: Stephen Warren -
We can use linker lists instead of explicitly declaring each function.
This makes the code shorter by avoiding switch() statements and lots of
header file declarations.While this does clean up the code it introduces a few code issues with SPL.
SPL never needs to print partition information since this all happens from
commands. SPL mostly doesn't need to obtain information about a partition
either, except in a few cases. Add these cases so that the code will be
dropped from each partition driver when not needed. This avoids code bloat.I think this is still a win, since it is not a bad thing to be explicit
about which features are used in SPL. But others may like to weigh in.Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
Tested-by: Stephen Warren -
Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Tested-by: Stephen Warren
15 Jan, 2016
1 commit
-
With format-security errors turned on, GCC picks up the use of sprintf with
a format parameter not being a string literal.Simple uses of sprintf are also converted to use strcpy.
Signed-off-by: Ben Whitten
Acked-by: Wolfgang Denk
Reviewed-by: Tom Rini
14 Jan, 2016
1 commit
-
This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.Signed-off-by: Stephen Warren
Reviewed-by: Tom Rini
15 Oct, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
16 Jul, 2013
1 commit
-
With CONFIG_SYS_64BIT_LBA, lbaint_t gets defined as a 64-bit type,
which is required to represent block numbers for storage devices that
exceed 2TiB (the block size usually is 512B), e.g. recent hard drivesWe now use lbaint_t for partition offset to reflect the lbaint_t change,
and access partitions beyond or crossing the 2.1TiB limit.
This required changes to signature of ext4fs_devread(), and type of all
variables relatives to block sector.ext2/ext4 fs uses logical block represented by a 32 bit value. Logical
block is a multiple of device block sector. To avoid overflow problem
when calling ext4fs_devread(), we need to cast the sector parameter.Signed-off-by: Frédéric Leroy
02 May, 2013
1 commit
-
For ISO we check the block size of the device if this is != the CD sector
size we assume that the device has no ISO partition.Signed-off-by: Egbert Eich
15 Mar, 2013
1 commit
-
This set of ifdefs is used in a number of places. Move its definition
somewhere common so it doesn't have to be repeated.Signed-off-by: Stephen Warren
Acked-by: Simon Glass
Acked-by: Tom Rini
Signed-off-by: Tom Warren
22 Jun, 2012
1 commit
-
This driver is unused and obsolete.
Signed-off-by: Marek Vasut
Cc: Wolfgang Denk
Cc: unsik Kim
10 Aug, 2009
1 commit
-
Remove bogus newline character that got added to the .name field of
the disk_partition_t structure.Signed-off-by: Wolfgang Denk
04 Apr, 2009
1 commit
-
Mflash is fusion memory device mainly targeted consumer eletronic and
mobile phone.
Internally, it have nand flash and other hardware logics and supports
some different operation (ATA, IO, XIP) modes.IO mode is custom mode for the host that doesn't have IDE interface.
(Many mobile targeted SoC doesn't have IDE bus)This driver support mflash IO mode.
Followings are brief descriptions about IO mode.
1. IO mode based on ATA protocol and uses some custom command. (read
confirm, write confirm)
2. IO mode uses SRAM bus interface.Signed-off-by: unsik Kim
18 Feb, 2009
1 commit
-
Move the CONFIG_XXX out of the part_XXX.c file and into Makefile to
avoid pointless compiles.Signed-off-by: Mike Frysinger
21 May, 2008
1 commit
-
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.Signed-off-by: Wolfgang Denk
27 Mar, 2008
1 commit
-
- add the SATA framework
- add the SATA command lineSigned-off-by: Dave Liu
10 Jul, 2007
1 commit
-
Signed-off-by: Jon Loeliger
04 Jul, 2007
1 commit
-
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)Signed-off-by: Jon Loeliger
13 Oct, 2005
1 commit
25 Feb, 2005
1 commit
30 Jun, 2003
1 commit
-
(autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
28 Jun, 2003
1 commit
-
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
19 Nov, 2002
1 commit
-
Add code for AmigaOne board
(preliminary merge to U-Boot, still WIP)* Patch by Jon Diekema, 12 Nov 2002:
- Adding URL for IEEE OUI lookup
- Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
being defined.
- In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
root-on-nfs macros are designed to switch how the default boot
method gets defined.
03 Nov, 2002
1 commit