13 Jun, 2018
1 commit
-
Often during debugging session it's very interesting to see
what data we were dealing with. For example what we write or read
to/from memory or peripherals.This change introduces functions that allow to dump binary
data with one simple function invocation like:
------------------->8----------------
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
------------------->8----------------which gives us the following:
------------------->8----------------
00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35 ....baudrate=115
00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e 200.bootargs=con
00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30 sole=ttyS3,11520
00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00 0n8.bootdelay=3.
00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00 bootfile=uImage.
00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39 fdtcontroladdr=9
00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72 ffb1ba0.loadaddr
00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65 =0x82000000.stde
00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 rr=serial0@e0022
00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c 000.stdin=serial
000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75 0@e0022000.stdou
000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30 t=serial0@e00220
000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00..............
...
------------------->8----------------Source of hexdump.c was copied from Linux kernel v4.7-rc2.
Signed-off-by: Alexey Brodkin
Cc: Anatolij Gustschin
Cc: Mario Six
Cc: Simon Glass
Cc: Tom Rini
Cc: Stefan Roese
07 May, 2018
1 commit
-
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.Signed-off-by: Tom Rini
23 Jan, 2018
1 commit
-
For debugging efi_loader we need the capability to print EFI
device paths. With this patch we can write:debug("device path: %pD", dp);
A possible output would be
device path: /MemoryMapped(0x0,0x3ff93a82,0x3ff93a82)
This enhancement is not available when building without EFI support
and neither in the SPL nor in the API example.A test is provided. It can be executed in the sandbox with command
ut_print.The development for EFI support in the sandbox is currently in
branch u-boot-dm/efi-working. The branch currently lacks
commit 6ea8b580f06b ("efi_loader: correct DeviceNodeToText
for media types"). Ater rebasing the aforementioned branch on
U-Boot v2018.01 the test is executed successfully.Without EFI support in the sandbox the test is simply skipped.
Suggested-by: Rob Clark
Signed-off-by: Heinrich Schuchardt
Reviewed-by: Simon Glass
Signed-off-by: Alexander Graf
13 Sep, 2017
2 commits
-
This works (roughly) the same way as linux's, but we currently always
print lower-case (ie. we just keep %pUB and %pUL for compat with linux),
mostly just because that is what uuid_bin_to_str() supports.%pUb: 01020304-0506-0708-090a-0b0c0d0e0f10
%pUl: 04030201-0605-0807-090a-0b0c0d0e0f10It will be used by a later efi_loader paths for efi variables and for
device-path-to-text protocol, and also quite useful for debug prints
of protocol GUIDs.Signed-off-by: Rob Clark
Tested-by: Heinrich Schuchardt
Reviewed-by: Simon Glass -
This is convenient for efi_loader which deals a lot with UTF-16. Only
enabled with CC_SHORT_WCHAR, leaving room to add a UTF-32 version when
CC_SHORT_WCHAR is not enabled.Signed-off-by: Rob Clark
Reviewed-by: Simon Glass
Reviewed-by: Simon Glass
21 Jan, 2017
1 commit
-
We have long had available optimized versions of the memset and memcpy
functions that are borrowed from the Linux kernel. We should use these
in normal conditions as the speed wins in many workflows outweigh the
relatively minor size increase. However, we have a number of places
where we're simply too close to size limits in SPL and must be able to
make the size vs performance trade-off in those cases.Cc: Philippe Reynes
Cc: Eric Jarrige
Cc: Heiko Schocher
Cc: Magnus Lilja
Cc: Lokesh Vutla
Cc: Chander Kashyap
Cc: Akshay Saraswat
Cc: Simon Glass
Cc: Stefan Roese
Signed-off-by: Tom Rini
Acked-by: Stefan Roese
Reviewed-by: Simon Glass
21 May, 2016
1 commit
-
Specifically tested on MIPS under QEMU (works with all combination of bit-ness and endian-ness)
Signed-off-by: Stanislav Galabov
08 Feb, 2016
1 commit
-
This patch adds U-Boot API support (used by FreeBSD loader) for MIPS platforms.
Signed-off-by: Stanislav Galabov
26 Feb, 2014
2 commits
-
Signed-off-by: Masahiro Yamada
-
Signed-off-by: Masahiro Yamada
20 Feb, 2014
6 commits
-
Signed-off-by: Masahiro Yamada
-
Now we are ready to switch over to real Kbuild.
This commit disables temporary scripts:
scripts/{Makefile.build.tmp, Makefile.host.tmp}
and enables real Kbuild scripts:
scripts/{Makefile.build,Makefile.host,Makefile.lib}.This switch is triggered by the line in scripts/Kbuild.include
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj
+build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build objWe need to adjust some build scripts for U-Boot.
But smaller amount of modification is preferable.Additionally, we need to fix compiler flags which are
locally added or removed.In Kbuild, it is not allowed to change CFLAGS locally.
Instead, ccflags-y, asflags-y, cppflags-y,
CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o
are prepared for that purpose.Signed-off-by: Masahiro Yamada
Tested-by: Gerhard Sittig -
This commit changes the working directory
where the build process occurs.Before this commit, build process occurred under the source
tree for both in-tree and out-of-tree build.That's why we needed to add $(obj) prefix to all generated
files in makefiles like follows:
$(obj)u-boot.bin: $(obj)u-bootHere, $(obj) is empty for in-tree build, whereas it points
to the output directory for out-of-tree build.And our old build system changes the current working directory
with "make -C " syntax when descending into the
sub-directories.On the other hand, Kbuild uses a different idea
to handle out-of-tree build and directory descending.The build process of Kbuild always occurs under the output tree.
When "O=dir/to/store/output/files" is given, the build system
changes the current working directory to that directory and
restarts the make.Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj="
syntax for descending into sub-directories.
(We can write it like "make $(obj)=" with a shorthand.)
This means the current working directory is always the top
of the output directory.Signed-off-by: Masahiro Yamada
Tested-by: Gerhard Sittig -
This commit moves some flags which are used
under examples/ directory only.Signed-off-by: Masahiro Yamada
-
This commit moves suffix rules from config.mk
to scripts/Makefile.build, which will allow us
to switch smoothly to real Kbuild.Note1:
post/lib_powerpc/fpu/Makefile has
its own rule to compile C sources.
We need to tweak it to keep the same behavior.Note2:
There are two file2 with the same name:
arch/arm/lib/crt0.S and eamples/api/crt0.S.
To keep the same build behavior,
examples/api/Makefile also has to be treaked.Signed-off-by: Masahiro Yamada
-
Signed-off-by: Masahiro Yamada
25 Nov, 2013
2 commits
-
All objects under api/ and examples/api/ directories are selected
by CONFIG_API.
So we can move CONFIG_API switch to the top Makefile.In order to use CONFIG_API, the definition of SUBDIR_EXAMPLES-y
must be moved after "sinlude $(obj)include/autoconf.mk".Signed-off-by: Masahiro Yamada
-
Signed-off-by: Masahiro Yamada
05 Nov, 2013
1 commit
-
This fixes building time.c when unreferenced functions are added.
Signed-off-by: Rob Herring
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
22 Oct, 2011
1 commit
-
The examples/api is not configured with USE_PRIVATE_LIBGCC. This makes
building examples/api break on certain boards that do not/cannot use the
public libgcc.Nevertheless, this patch has to also touch the top-level Makefile to fix
this problem because the current top-level Makefile does not specify
libgcc as a prerequisite of examples/api, and explicitly builds
examples/api _before_ libgcc.For testing this patch, I added the following to configs/seaboard.h and
ran demo.bin on a Seaboard.+#define CONFIG_API
+#define CONFIG_SYS_MMC_MAX_DEVICE 2
+#define CONFIG_CMD_NET
+#define CONFIG_NET_MULTISigned-off-by: Che-Liang Chiou
Acked-by: Mike Frysinger
22 Apr, 2010
1 commit
-
As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.Signed-off-by: Stefan Roese
Acked-by: Wolfgang Denk
Acked-by: Detlev Zundel
Acked-by: Kim Phillips
Cc: Peter Tyser
Cc: Anatolij Gustschin
13 Apr, 2010
2 commits
-
Now that the other architecture-specific lib directories have been
moved out of the top-level directory there's not much reason to have the
'_generic' suffix on the common lib directory.Signed-off-by: Peter Tyser
-
Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk
This change is intended to clean up the top-level directory structure
and more closely mimic Linux's directory organization.Signed-off-by: Peter Tyser
05 Dec, 2009
1 commit
-
According to the PPC reference implementation the udelay() function is
responsible for resetting the watchdog timer as frequently as needed.
Most other architectures do not meet that requirement, so long-running
operations might result in a watchdog reset.This patch adds a generic udelay() function which takes care of
resetting the watchdog before calling an architecture-specific
__udelay().Signed-off-by: Ingo van Lil
27 Jul, 2009
1 commit
-
Signed-off-by: Wolfgang Denk
21 Jul, 2009
1 commit
-
Also add a rule to remove demo.bin which was previously leftover
after a "make clean"Signed-off-by: Peter Tyser