11 May, 2020
2 commits
-
Update board codes and DTS files to add display relevant nodes and
configurations.
Support two video links with MIPI DSI:
1. MIPI DSI to HDMI convertor, this is default
2. RM67191 panelSigned-off-by: Ye Li
(cherry picked from commit 05498bdd53c77c5d6ead68da82cd34afde0ba17a) -
Enable CONFIG_OF_LIBFDT_OVERLAY in DDR4 NAND boot defconfig. It can
be used by u-boot to apply a dto built by OP-TEE.Signed-off-by: Ye Li
(cherry picked from commit b92aa7b47396a9bca6332556201e0b96c7c5f9c1)
27 Apr, 2020
7 commits
-
Current codes assume the OPTEE address is at the end of first DRAM bank.
Adjust the process to allow OPTEE in the middle of first bank.When OPTEE memory is removed from first bank, it may split the first bank
to two banks, so increase the CONFIG_NR_DRAM_BANKS and adjust the MMU
table for the split case.Signed-off-by: Ye Li
Signed-off-by: Silvano di Ninno
Tested-by: Silvano di Ninno
(cherry picked from commit e2a3b770ef847354ebe85c363608f27381d48adc) -
Both imx8mn/imx8mm EVK boards have eMMC 5.1 chip and support SD3.0
So we enable the HS400ES and UHS configs to enhance eMMC/SD accessSigned-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit cf83fe7dcfcb14dd633ad43ef387793a863e111a) -
dependency of CMD_NANDBCB`s default value
compiling nandbcb of imx8mm-evk depends on NAND and CMD_MTDPARTS
modify dependency of CMD_NANDBCB`s default value
Signed-off-by: Alice Guo
(cherry picked from commit 1b14e8cbefdb0f8126ceb6a85b1fd0db142328e6) -
For imx8mm, the CONFIG_CI_UDC is defined in
include/configs/imx8mm_evk.h, which leads to CONFIG_CI_UDC can not been
enabled in Kconfig, and CONFIG_DM_USB_GADGET which we need selected by
CONFIG_CI_UDC in Kconfig also can not work. So move CONFIG_CI_UDC to
defconfig files.The CONFIG_USB_GADGET_DUALSPEED is selected by CONFIG_CI_UDC in Kconfig
files too, so we don't need it to be defined in include/configs/imx8mm_evk.h
files.Signed-off-by: Sherry Sun
Reviewed-by: Ye Li
(cherry picked from commit cb33ca7a2a5052bdb7b479ae2af5169360625962) -
uuu will use fastboot command to write emmc, enable it as
default for iMX8MM EVK boardSigned-off-by: Frank Li
Signed-off-by: Ye Li
(cherry picked from commit ed6898da1c1a78dbf59ac4d6d291bc25e14c636e) -
Enable the SPL SDP for iMX8MM EVK. So that when booting from USB serial
download mode, the SPL will enter SDP to download FIT image from USB host
(uuu tool) and boot into FIT image.The SDP driver needs larger malloc pool size, so extend the SPL malloc pool
to 12KB and reduce the SPL BSS MAX to 4KB because BSS actual size is about 1KB.Signed-off-by: Ye Li
(cherry picked from commit bd9cbf66f801ac930f7e62da9ed42653fd3dc7f9) -
Update the board codes to use latest DDR script and support flexspi boot,
USB host/gadget, etc.
Also add DDR4 EVK board support for RAW NAND boot.Signed-off-by: Ye Li