Eric Lee / smarc-uboot

04 Dec, 2019

2 commits

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

26 Aug, 2019

1 commit

  • c680df7e8   mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig ... Browse Code »

    Convert CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig, update defconfigs,
    headers and whitelist.

    Please note that this symbol already was used in Kconfig
    (imply in CONFIG_NAND_ATMEL) which did not work, since this symbol was
    not available in Kconfig. This changes now with this patch and all
    boards with CONFIG_NAND_ATMEL will have BBT enabled. Which is what
    I also need on my GARDENA AT91SAM based board.

    Signed-off-by: Stefan Roese
    Cc: Eugen Hristev
    Cc: Miquel Raynal
    Cc: Gregory CLEMENT
    [trini: Rework such that the configs are unchanged to start with]
    Signed-off-by: Tom Rini

    Stefan Roese
     

23 Jun, 2019

1 commit

30 Apr, 2019

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

09 Apr, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

29 Dec, 2017

1 commit

  • b47b70531   imx: Unify CONFIG_BOOTDELAY ... Browse Code »

    In order to provide a consistent user experience for imx board users,
    remove the custom CONFIG_BOOTDELAY values from defconfig files, so that
    all boards can use the default two second delay.

    Signed-off-by: Fabio Estevam
    Reviewed-by: Lukasz Majewski

    Fabio Estevam
     

21 Oct, 2017

2 commits

  • 8daec2d9d   net: Add SMC911X driver to Kconfig, convert ... Browse Code »

    We add the various SMC91XX symbols to drivers/net/Kconfig and then this
    converts the following to Kconfig:
    CONFIG_SMC911X
    CONFIG_SMC911X_BASE
    CONFIG_SMC911X_16_BIT
    CONFIG_SMC911X_32_BIT

    Signed-off-by: Adam Ford
    [trini: Apply to the rest of the tree, re-squash old and new patch]
    Signed-off-by: Tom Rini

    Adam Ford
     
  • 0a9ef4515   Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_NAND_MXC
    CONFIG_NAND_OMAP_GPMC
    CONFIG_NAND_OMAP_GPMC_PREFETCH
    CONFIG_NAND_OMAP_ELM
    CONFIG_SPL_NAND_AM33XX_BCH
    CONFIG_SPL_NAND_SIMPLE
    CONFIG_SYS_NAND_BUSWIDTH_16BIT

    Signed-off-by: Adam Ford
    Reviewed-by: Heiko Schocher
    [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues,
    add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

30 Apr, 2017

2 commits

30 Dec, 2016

1 commit

26 Oct, 2016

1 commit

10 Jun, 2016

1 commit

26 Apr, 2016

3 commits

15 Mar, 2016

1 commit

26 Jun, 2015

1 commit

01 Jun, 2015

2 commits

13 May, 2015

1 commit

  • bd328eb38   Clean all defconfigs with savedefconfig ... Browse Code »

    In order to reduce merge conflicts and to maintain the simplest possible
    defconfig files, we should be using the savedefconfig feature of Kconfig
    every time a new feature is added. This keeps the defconfig settings to
    a minimum (only those things not default) and keeps them in the same
    order as the Kconfig options.

    Signed-off-by: Joe Hershberger
    Cc: Masahiro Yamada
    Acked-by: Stephen Warren
    Cc: Tom Rini

    Joe Hershberger
     

30 Jul, 2014

1 commit

  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada