Eric Lee / smarc-uboot

26 Aug, 2019

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    15

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

23 Jul, 2018

1 commit

07 May, 2018

1 commit

  • 83d290c56   SPDX: Convert all of our single license tags to Linux Kernel style ... Browse Code »
    60

    When U-Boot started using SPDX tags we were among the early adopters and
    there weren't a lot of other examples to borrow from. So we picked the
    area of the file that usually had a full license text and replaced it
    with an appropriate SPDX-License-Identifier: entry. Since then, the
    Linux Kernel has adopted SPDX tags and they place it as the very first
    line in a file (except where shebangs are used, then it's second line)
    and with slightly different comment styles than us.

    In part due to community overlap, in part due to better tag visibility
    and in part for other minor reasons, switch over to that style.

    This commit changes all instances where we have a single declared
    license in the tag as both the before and after are identical in tag
    contents. There's also a few places where I found we did not have a tag
    and have introduced one.

    Signed-off-by: Tom Rini

    Tom Rini
     

09 Mar, 2018

1 commit

  • b996b7d42   ARM: Drop unreferenced CONFIG_* defines named after boards ... Browse Code »

    The following config symbols are only defined once and never referenced
    anywhere else:

    CONFIG_AT91SAM9263EK
    CONFIG_AT91SAM9RLEK
    CONFIG_BARIX_IPAM390
    CONFIG_BOARD_H2200
    CONFIG_EP9301
    CONFIG_KZM_A9_GT
    CONFIG_PICOSAM
    CONFIG_PLATINUM_PICON
    CONFIG_PLATINUM_TITANIUM
    CONFIG_PM9261
    CONFIG_PM9263
    CONFIG_PM9G45
    CONFIG_SIEMENS_DRACO
    CONFIG_SIEMENS_PXM2
    CONFIG_SIEMENS_RUT
    CONFIG_SMDKC100
    CONFIG_SMDKV310
    CONFIG_STM32F4DISCOVERY

    Most of them are config symbols named after the respective boards which
    seems to have been a standard practice at some point.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    17

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Nov, 2017

1 commit

21 Oct, 2017

1 commit

  • 8daec2d9d   net: Add SMC911X driver to Kconfig, convert ... Browse Code »

    We add the various SMC91XX symbols to drivers/net/Kconfig and then this
    converts the following to Kconfig:
    CONFIG_SMC911X
    CONFIG_SMC911X_BASE
    CONFIG_SMC911X_16_BIT
    CONFIG_SMC911X_32_BIT

    Signed-off-by: Adam Ford
    [trini: Apply to the rest of the tree, re-squash old and new patch]
    Signed-off-by: Tom Rini

    Adam Ford
     

04 Sep, 2017

3 commits

  • e090579d0   include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions ... Browse Code »

    This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be
    equal to CONFIG_SYS_CBSIZE in numerous configuration files.

    We remove such definitions in two situations:

    - CONFIG_SYS_CBSIZE is otherwise not defined in the board
    configuration file, which means the default value of
    CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is
    larger.

    - CONFIG_SYS_CBSIZE is defined in the board configuration file, but
    to a value equal or less than 512. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it
    is equal or larger.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 1f20fc53b   include/configs: drop default definitions of CONFIG_SYS_MAXARGS ... Browse Code »

    Now that include/config_fallbacks.h define a sane fallback for
    CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all
    configurations that were using the default value.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 3784c789e   include/configs: remove CONFIG_SYS_CBSIZE when the default value is used ... Browse Code »

    Now that include/config_fallbacks.h define a sane fallback for
    CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all
    configurations that were using the default value.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini
    [trini: Drop from stih410-b2260.h]
    Signed-off-by: Tom Rini

    Thomas Petazzoni
     

15 Aug, 2017

1 commit

12 Aug, 2017

2 commits

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

26 Jul, 2017

1 commit

25 Jul, 2017

1 commit

23 Jul, 2017

1 commit

  • f3603b438   powerpc: Remove unneccessary #ifdefs in reginfo ... Browse Code »

    reginfo command is calling mpc8xx_reginfo(), mpc85xx_reginfo()
    or mpc86xx_reginfo() based on CONFIG_ symbol.
    As those 3 functions can't me defined at the same time, let's
    rename them print_reginfo() to avoid the #ifdefs
    The name is kept generic as it is not at all dependent on
    powerpc arch and any other arch could want to also print
    such information.

    In addition, as the Makefile compiles cmd/reginfo.c only when
    CONFIG_CMD_REGINFO is set, there is no need to enclose the U_BOOT_CMD
    definition inside a #ifdef CONFIG_CMD_REGINFO

    Lets all remove the #ifdefs around the U_BOOT_CMD as this
    file is only compiled when CONFIG_CMD_REGINFO is defined

    Finally, this is a PowerPC-only command, disable it on a number of
    non-PowerPC platforms.

    Signed-off-by: Christophe Leroy
    Signed-off-by: Tom Rini

    Christophe Leroy
     

20 Mar, 2017

1 commit

13 Feb, 2017

1 commit

  • e856bdcfb   flash: complete CONFIG_SYS_NO_FLASH move with renaming ... Browse Code »
    21

    We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
    not completed. Finish this work by the tool.

    During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
    Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
    than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
    make the code more readable. Besides, negative meaning symbols do
    not fit in obj-$(CONFIG_...) style Makefiles.

    This commit was created as follows:

    [1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

    [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

    [3] Rename the instances in defconfigs by the following:
    find . -path './configs/*_defconfig' | xargs sed -i \
    -e '/CONFIG_SYS_NO_FLASH=y/d' \
    -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

    [4] Change the conditionals by the following:
    find . -name '*.[ch]' | xargs sed -i \
    -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
    -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
    -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
    -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

    [5] Modify the following manually
    - Rename the rest of instances
    - Remove the description from README
    - Create the new Kconfig entry in drivers/mtd/Kconfig
    - Remove the old Kconfig entry from common/Kconfig
    - Remove the garbage comments from include/configs/*.h

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

28 Jan, 2017

1 commit

12 Oct, 2016

2 commits

20 Sep, 2016

1 commit

27 Aug, 2016

1 commit

  • 067716bac   ARM: Move SYS_CACHELINE_SIZE over to Kconfig ... Browse Code »

    This series moves the CONFIG_SYS_CACHELINE_SIZE. First, in nearly all
    cases we are mirroring the values used by the Linux Kernel here. Also,
    so long as (and in this case, it is true) we implement flushes in hunks
    that are no larger than the smallest implementation (and given that we
    mirror the Linux Kernel, again we are fine) it is OK to align higher.
    The biggest changes here are that we always use 64 bytes for CPU_V7 even
    if for example the underlying core is only 32 bytes (this mirrors
    Linux). Second, we say ARM64 uses 64 bytes not 128 (as found in the
    Linux Kernel) as we do not need multi-platform support (to this degree)
    and only the Cavium ThunderX 88xx series has a use for such large
    alignment.

    Cc: Albert Aribaud
    Cc: Marek Vasut
    Cc: Stefano Babic
    Cc: Prafulla Wadaskar
    Cc: Luka Perkov
    Cc: Stefan Roese
    Cc: Nagendra T S
    Cc: Vaibhav Hiremath
    Acked-by: Lokesh Vutla
    Cc: Steve Rae
    Cc: Igor Grinberg
    Cc: Nikita Kiryanov
    Cc: Stefan Agner
    Acked-by: Heiko Schocher
    Cc: Mateusz Kulikowski
    Cc: Peter Griffin
    Acked-by: Paul Kocialkowski
    Cc: Anatolij Gustschin
    Acked-by: "Pali Rohár"
    Cc: Adam Ford
    Cc: Steve Sakoman
    Cc: Grazvydas Ignotas
    Cc: Nishanth Menon
    Cc: Stephen Warren
    Cc: Robert Baldyga
    Cc: Minkyu Kang
    Cc: Thomas Weber
    Cc: Masahiro Yamada
    Cc: David Feng
    Cc: Alison Wang
    Cc: Michal Simek
    Cc: Simon Glass
    Cc: York Sun
    Cc: Shengzhou Liu
    Cc: Mingkai Hu
    Cc: Prabhakar Kushwaha
    Cc: Aneesh Bansal
    Cc: Saksham Jain
    Cc: Qianyu Gong
    Cc: Wang Dongsheng
    Cc: Alex Porosanu
    Cc: Hongbo Zhang
    Cc: tang yuantian
    Cc: Rajesh Bhagat
    Cc: Josh Wu
    Cc: Bo Shen
    Cc: Viresh Kumar
    Cc: Hannes Schmelzer
    Cc: Thomas Chou
    Cc: Joe Hershberger
    Cc: Sam Protsenko
    Cc: Bin Meng
    Cc: Christophe Ricard
    Cc: Anand Moon
    Cc: Beniamino Galvani
    Cc: Carlo Caione
    Cc: huang lin
    Cc: Sjoerd Simons
    Cc: Xu Ziyuan
    Cc: "jk.kernel@gmail.com"
    Cc: "Ariel D'Alessandro"
    Cc: Kever Yang
    Cc: Samuel Egli
    Cc: Chin Liang See
    Cc: Dinh Nguyen
    Cc: Hans de Goede
    Cc: Ian Campbell
    Cc: Siarhei Siamashka
    Cc: Boris Brezillon
    Cc: Andre Przywara
    Cc: Bernhard Nortmann
    Cc: Wolfgang Denk
    Cc: Ben Whitten
    Cc: Tom Warren
    Cc: Alexander Graf
    Cc: Sekhar Nori
    Cc: Vitaly Andrianov
    Cc: "Andrew F. Davis"
    Cc: Murali Karicheri
    Cc: Carlos Hernandez
    Cc: Ladislav Michl
    Cc: Ash Charles
    Cc: Mugunthan V N
    Cc: Daniel Allred
    Cc: Gong Qianyu
    Signed-off-by: Tom Rini
    Acked-by: Masahiro Yamada
    Acked-by: Chin Liang See
    Tested-by: Stephen Warren
    Acked-by: Paul Kocialkowski

    Tom Rini
     

02 Jul, 2016

1 commit

  • 2fbb8462b   autoboot: remove CONFIG_ZERO_BOOTDELAY_CHECK ... Browse Code »

    As the help message of CONFIG_BOOTDELAY says, CONFIG_BOOTDELAY=-2
    means the autoboot with no delay, with no abort check even if
    CONFIG_ZERO_BOOTDELAY_CHECK is defined.

    To sum up, the autoboot behaves as follows:

    [1] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=y
    autoboot with no delay, but you can abort it by key input

    [2] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
    autoboot with no delay, with no check for abort

    [3] CONFIG_BOOTDELAY=-1
    disable autoboot

    [4] CONFIG_BOOTDELAY=-2
    autoboot with no delay, with no check for abort

    As you notice, [2] and [4] come to the same result, which means we
    do not need CONFIG_ZERO_BOOTDELAY_CHECK. We can control all the
    cases only by CONFIG_BOOTDELAY, like this:

    [1] CONFIG_BOOTDELAY=0
    autoboot with no delay, but you can abort it by key input

    [2] CONFIG_BOOTDELAY=-1
    disable autoboot

    [3] CONFIG_BOOTDELAY=-2
    autoboot with no delay, with no check for abort

    This commit converts the logic as follow:
    CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
    --> CONFIG_BOOTDELAY=-2

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Stefan Roese
    Acked-by: Igor Grinberg
    Reviewed-by: Simon Glass
    Acked-by: Vladimir Zapolskiy
    Reviewed-by: Heiko Schocher
    Acked-by: Christian Riesch
    Acked-by: Hannes Schmelzer

    Masahiro Yamada
     

10 Jun, 2016

1 commit

26 Apr, 2016

2 commits

15 Mar, 2016

1 commit

31 Jan, 2016

1 commit

  • 3709844f2   armv7: add cacheline sizes where missing ... Browse Code »

    Some armv7 targets are missing a cache line size declaration.
    In preparation for "arm: cache: Implement cache range check for v7"
    patch, add these declarations with the appropriate value for
    the target's SoC or CPU.

    Signed-off-by: Albert ARIBAUD
    Reviewed-by: Tom Rini

    Albert ARIBAUD
     

25 Oct, 2015

1 commit

  • 09f3ca3dd   arm, powerpc: select SYS_GENERIC_BOARD ... Browse Code »
    1

    We have finished Generic Board conversion for ARM and PowerPC, i.e.
    all the boards have been converted except OpenRISC, SuperH, SPARC,
    which have not supported Generic Board framework yet.

    Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro
    defines in include/configs/*.h.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

21 Oct, 2015

1 commit

13 Aug, 2015

1 commit

  • 181bd9dc6   kconfig: add config option for shell prompt ... Browse Code »
    105

    Add option to set shell prompt string from menuconfig and migrate
    boards globally.

    The migration is done as follows:
    - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
    entry moved to their defconfig files.
    - Boards that defined some kind of #ifdef logic which selects the
    CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
    right before the #ifdef logic and were left alone.
    - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
    CONFIG_SYS_PROMPT was removed from all _common.h and _common.h
    files. This results in a streamlined default value across platforms, and
    includes the following files: spear-common, sunxi-common, mv-common,
    ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
    - Boards that relied on _common.h values of CONFIG_SYS_PROMPT were
    not updated in their respective defconfig files under the assumption that
    since they did not explicitly define a value, they're fine with whatever
    the default is.
    - On the other hand, boards that relied on a value defined in some
    _common.h file such as woodburn_common, rpi-common,
    bur_am335x_common, ls2085a_common, siemens_am33x_common, and
    omap3_evm_common, had their values moved to the respective defconfig files.
    - The define V_PROMPT was removed, since it is not used anywhere except for
    assigning a value for CONFIG_SYS_PROMPT.

    Cc: Tom Rini
    Cc: Masahiro Yamada
    Cc: Stefano Babic
    Cc: Igor Grinberg
    Signed-off-by: Nikita Kiryanov
    [trini: Add spring, sniper, smartweb to conversion]
    Signed-off-by: Tom Rini

    Nikita Kiryanov
     

26 Jun, 2015

1 commit

13 Feb, 2015

2 commits

23 Oct, 2014

1 commit