Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

05 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

08 Nov, 2019

1 commit

23 Sep, 2019

1 commit

26 Aug, 2019

2 commits

02 Aug, 2019

1 commit

  • 37304aaf6   Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig ... Browse Code »
    4

    This converts the following to Kconfig:
    CONFIG_USE_PREBOOT
    CONFIG_PREBOOT

    Both are together in one commit, since otherwise the former causes kconfig
    to define the latter, which gives duplicate symbol errors.

    Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
    backslash lands in the wrong place. Similarly with socfpga_vining_fpga.

    Signed-off-by: Simon Glass

    Simon Glass
     

27 May, 2019

1 commit

  • 0a60da960   arm: mvebu: controlcenterdc: Update config ... Browse Code »

    Several drivers used by the ControlCenterDC board were converted to DM
    upstream. But the board had not been using these drivers yet.

    Update the board's config file to reflect these changes and use the DM
    version of these drivers. No further device tree updates are necessary,
    since the devices in question are already present in the device tree.

    This especially fixes the three compile warnings about CONFIG_DM_MMC,
    CONFIG_DM_USB, and CONFIG_AHCI for the ControlCenterDC board.

    Signed-off-by: Mario Six
    Signed-off-by: Stefan Roese

    Mario Six
     

30 Apr, 2019

2 commits

26 Mar, 2019

3 commits

05 Feb, 2019

1 commit

  • 94f453ea3   pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig ... Browse Code »

    This patch adds DM_PCI support to the MVEBU PCIe driver. This is
    necessary, since all PCI drivers have to be moved to DM (driver model)
    until the v2019.07 release.

    To not break git bisect'ablility, this patch also moves CONFIG_PCI_MVEBU
    from config headers to the defconfig files.

    Signed-off-by: Stefan Roese
    Cc: Dirk Eibach
    Cc: Mario Six
    Cc: Chris Packham
    Cc: Phil Sutter
    Cc: Marek Behún
    Cc: VlaoMao

    Stefan Roese
     

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

04 Jun, 2018

1 commit

15 May, 2018

1 commit

29 Apr, 2018

1 commit

12 Apr, 2018

1 commit

09 Apr, 2018

2 commits

08 Apr, 2018

1 commit

14 Feb, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

13 Dec, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

26 Sep, 2017

1 commit

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

12 Aug, 2017

2 commits

  • 0941f597a   Convert CONFIG_CMD_SCSI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_CMD_SCSI

    Also update the Makefile to use CONFIG_CMD_SCSI instead of CONFIG_SCSI to
    enable the command, fixing an earlier error.

    Signed-off-by: Simon Glass
    Reviewed-by: Bin Meng
    Reviewed-by: Philipp Tomsich
    [trini: Rework to default y if SCSI, drop cl-som-am57x which did not use
    CMD_SCSI for real]
    Signed-off-by: Tom Rini

    Simon Glass
     
  • 6500ec7a5   Convert CONFIG_CMD_PCI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_CMD_PCI

    Signed-off-by: Simon Glass
    Reviewed-by: Bin Meng
    Reviewed-by: Philipp Tomsich

    Simon Glass
     

11 Aug, 2017

1 commit

09 Aug, 2017

1 commit

08 Aug, 2017

1 commit

01 Aug, 2017

1 commit

26 Jul, 2017

1 commit