26 Feb, 2018
1 commit
-
Migrate the users of CONFIG_SYS_BOOTCOUNT_ADDR to Kconfig. We can
provide a default for BOOTCOUNT_AM33XX as that's a specific part of the
RTC in use. We can also provide a default for ARCH_LS1043A and
ARCH_LS1021A as they had been previously calculated and their symbols
are in Kconfig. In the case of other QE-enabled platforms, they are not
so we must update the relevant defconfig files. The previous default
only applied in some cases, even on a specific SoC family.Reviewed-by: Lukasz Majewski
Reviewed-by: Alex Kiernan
Signed-off-by: Tom Rini
23 Feb, 2018
1 commit
-
A number of platforms include config_distro_defaults.h but do not enable
CONFIG_DISTRO_DEFAULTS. As they plainly intended to, set that flag and
re-sync config files.Signed-off-by: Tom Rini
15 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTCOUNT_LIMITSigned-off-by: Lukasz Majewski
Tested-by: Alex Kiernan
Reviewed-by: Hannes Schmelzer
Acked-by: Hannes Schmelzer
11 Feb, 2018
2 commits
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
25 Jan, 2018
1 commit
-
Currently, socfpga_common.h does not allow configurations without
network support. This is because CONFIG_CMD_PXE is defined in this
file and distro mode has DHCP hard-coded as available.Fix this by moving CONFIG_CMD_PXE and CONFIG_MENU to the defconfigs
and by making DHCP optional in BOOT_TARGET_DEVICES(func).Signed-off-by: Simon Goldschmidt
09 Jan, 2018
1 commit
-
Enable CONFIG_CMD_PART item, as default environment requires it
and complains this command in unknown.Signed-off-by: Andrey Zhizhikin
06 Nov, 2017
1 commit
-
We move all instances of CONFIG_MTDIDS_DEFAULT and
CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files.
There's a few cases here where we need to expand upon what was in the
header file.Tested-by: Adam Ford #omap3_logic
Signed-off-by: Tom Rini
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
28 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
15 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
09 Aug, 2017
1 commit
-
Reviewed-by: Joe Hershberger
Signed-off-by: Tom Rini
26 Jul, 2017
2 commits
-
This converts the following to Kconfig:
CONFIG_FPGA_SOCFPGASigned-off-by: Tien Fong Chee
Reviewed-by: Ley Foon Tan
Reviewed-by: Dinh Nguyen -
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_SPI_FLASHSigned-off-by: Simon Glass
01 May, 2017
1 commit
-
Signed-off-by: Tom Rini
14 Apr, 2017
1 commit
-
This removes the default environment from the sr1500 header
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.This board has no upstream devicetree in the kernel source,
so set to socfpga_cyclone5_sr1500.dtb.Signed-off-by: Dalon Westergreen
Acked-by: Marek Vasut--
Changes in v2:
- Remove unneeded CONFIG_BOOTFILE
- set devicetree name to match socfpga_{fpga model}_{board model}.dts
pattern
26 Jan, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass
11 Jan, 2017
1 commit
-
This commit was created as follows:
[1] Rename the option with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e 's/CONFIG_DWMMC/CONFIG_MMC_DW/g'[2] create the entry for MMC_DW in drivers/mmc/Kconfig
(the prompt and help were copied from Linux)[3] run "tools/moveconfig.py -y MMC_DW"
[4] add "depends on MMC_DW" to the MMC_DW_ROCKCHIP entry
[5] Clean-up doc/README.socfpga by hand
Signed-off-by: Masahiro Yamada
Reviewed-by: Marek Vasut
24 Oct, 2016
4 commits
-
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_INFO_QUIETSigned-off-by: Simon Glass
[trini: Make this default n, re-run the migration]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINESigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_ENV_OVERWRITESigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_IS_IN_ENV
CONFIG_CONSOLE_MUXSigned-off-by: Simon Glass
[trini: Re-order, re-migrate]
Signed-off-by: Tom Rini
12 Oct, 2016
1 commit
-
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default
in certain architectures. Migrate all config files.Signed-off-by: Lokesh Vutla
Signed-off-by: Tom Rini
27 Sep, 2016
1 commit
-
move the UBI config options into Kconfig.
Signed-off-by: Heiko Schocher
Reviewed-by: Simon Glass
Reviewed-by: Andrew F. Davis
Reviewed by: Evgeni Dobrev
20 Sep, 2016
1 commit
-
This reverts commit 90c08d9e08c7a108ab904f3bbdeb558081757892.
I took a closer look at this after the commit was applied, and found
CONFIG_SYS_MALLOC_F_LEN=0x2000 was too much. 8KB memory for SPL is
actually too big for some boards. Perhaps 0x800 is enough, but the
situation varies board by board.Let's postpone our decision until we come up with a better idea.
Signed-off-by: Masahiro Yamada
Reviewed-by: Simon Glass
17 Sep, 2016
1 commit
-
Move the SPL settings into common/spl where most of the SPL code is kept.
Signed-off-by: Simon Glass
10 Sep, 2016
1 commit
-
move VERSION_VARIABLE from board config file into a
Kconfig option.Signed-off-by: Heiko Schocher
09 Sep, 2016
1 commit
-
Signed-off-by: Tom Rini
07 Sep, 2016
1 commit
-
If both SPL_DM and SPL_OF_CONTROL are enabled, SPL needs to bind
several devices, but CONFIG_SYS_MALLOC_F_LEN=0x400 is apparently
not enough. Increase the default to 0x2000 for the case. This
will be helpful for shorter defconfigs.Signed-off-by: Masahiro Yamada
Reviewed-by: Stefan Roese
Reviewed-by: Simon Glass
08 Aug, 2016
1 commit
-
This option controls how long it should be paused before entering
the auto-boot mode. The default value from Kconfig should be fine
except socfpga_vining_fpga_defconfig.Signed-off-by: Masahiro Yamada
10 Jun, 2016
1 commit
-
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.Signed-off-by: Heiko Schocher
Reviewed-by: Tom Rini
Acked-by: Viresh Kumar
Acked-by: Igor Grinberg
02 Jun, 2016
1 commit
-
Enable both features to reduce the SPL size by 6 kiB.
Signed-off-by: Marek Vasut
Cc: Chin Liang See
Cc: Dinh Nguyen
Cc: Pavel Machek
Cc: Stefan Roese
17 May, 2016
1 commit
-
This patch moves all appearances of CONFIG_SYS_I2C_DW from the config
header to the defconfig files.Signed-off-by: Stefan Roese
Cc: Heiko Schocher
Cc: Alexey Brodkin
26 Apr, 2016
3 commits
-
Update the config.h and defconfig files for the commands that 8e3c036
converted over to KconfigSigned-off-by: Tom Rini
-
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND. Due to how we have used this historically
we need to take further care here when converting.Signed-off-by: Tom Rini
-
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove
all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default.Signed-off-by: Tom Rini
12 Apr, 2016
1 commit
-
"buildman" tool revealed that USB_GADGET was enabled by mistake for this
board in process of moving that option to Kconfig. Remove it to bring
things back to correct state.Signed-off-by: Sam Protsenko
Acked-by: Stefan Roese
10 Apr, 2016
1 commit
-
CONFIG_SPI_FLASH_BAR was deleted from socfpga_common.h
and placed in socfpga_*_defconfig because it is Kconfig symbol.Signed-off-by: Denis Bakhvalov
Reported-by: Denis Bakhvalov
Cc: Marek Vasut
Acked-by: Marek Vasut
26 Mar, 2016
1 commit
-
The description was borrowed from kernel. "tristate" type was changed
to "bool" (I believe we don't support modules for u-boot yet, right?).
CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along
as well.Definitions were added to defconfig files in a way that
"make savedefconfig" generates exactly the same file as used defconfig.Signed-off-by: Sam Protsenko
[trini: Add zynq_zc702 conversion]
Signed-off-by: Tom Rini
21 Mar, 2016
1 commit
-
This patch makes the following changes to the SR1500 board port:
- Update defconfig to support SPI NOR (use make savedefconfig).
- Increase SPI speed to a maximum of 100MHz for faster system
bootup.
- Change environment location, so that its not between SPL and
main U-Boot. This way the combined SPL / U-Boot image can
be used for updates.Signed-off-by: Stefan Roese
Cc: Marek Vasut