01 Jun, 2017
1 commit
-
Currently these (board agnostic) commands cannot be selected using
menuconfig and friends. Fix this the obvious way. As part of this,
don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v'
and "we have a hashing command" as this makes the Kconfig logic odd.Signed-off-by: Daniel Thompson
[trini: Re-apply, add imply for a few cases, run moveconfig.py, also
migrate CRC32_VERIFY]
Signed-off-by: Tom Rini
24 May, 2017
1 commit
23 May, 2017
18 commits
-
trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't
get Kconfig errors on platforms without SPL, ie sandbox (without SPL).Signed-off-by: Tom Rini
-
The original commit for the MCF54418TWR ColdFire development board
support defined a 'CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN'
which obviously has a rogue 'CONFIG_SYS_NO_FLASH' embedded in the
intended 'CONFIG_SYS_FAULT_ECHO_LINK_DOWN' define.Signed-off-by: Lothar Waßmann
-
This converts the following to Kconfig:
CONFIG_CMD_LZMADECSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_LZMASigned-off-by: Simon Glass
-
This is not used in U-Boot. Drop it.
Signed-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_KGDBSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_IRQSigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_CMD_JFFS2Signed-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_IOTRACESigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_IOLOOPSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_IOSigned-off-by: Simon Glass
-
This option is not used in U-Boot. Drop it.
Signed-off-by: Simon Glass
-
This option is not used in U-Boot. Drop it.
Signed-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_IMMAPAlso move this command out of the cmd/ directory since it is
PowerPC-specific.Signed-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_IDESigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_HDMIDETECTNote that we cannot do 'default y if VIDEO' because this option is only
enabled for a small subset of mx6 boards. Also this command is is not a
great implementation (it doesn't use driver model).Signed-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_CMD_HD44760Also drop CONFIG_CMD_HD44780 which appears to be a typo.
Signed-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_HASHSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
[trini: Rework slightly, enable on some boards again]
Signed-off-by: Tom Rini
22 May, 2017
20 commits
-
This converts the following to Kconfig:
CONFIG_CMD_GSCSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_GETTIMESigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_CMD_FUSESigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_FPGA_LOADBP
CONFIG_CMD_FPGA_LOADFS
CONFIG_CMD_FPGA_LOADMK
CONFIG_CMD_FPGA_LOADPSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_FPGADSigned-off-by: Simon Glass
-
This option is not used by any board. Drop it.
Signed-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_FDCSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_ETHSWAlso enable it for sandbox to increase build coverage.
Signed-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_ESBC_VALIDATESigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_CMD_ERRATASigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_CMD_ENV_FLAGSSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_ENV_CALLBACKSigned-off-by: Simon Glass
-
This option is not used in U-Boot. Drop it.
Signed-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_ENTERRCMSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_EEPROM
CONFIG_CMD_EEPROM_LAYOUT
CONFIG_EEPROM_LAYOUT_HELP_STRINGSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
[trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
platforms]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_CMD_EECONFIGSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CMD_ECCTESTSigned-off-by: Simon Glass
-
This is only used by one board and always set to 0x51. Drop this option.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
Reviewed-by: Heiko Schocher -
Now that dtt is gone, this is not used. Drop it.
Signed-off-by: Simon Glass
Reviewed-by: Heiko Schocher
Reviewed-by: Tom Rini -
This subsystem is quite old. It has been replaced with a driver-model
version (UCLASS_THERMAL). Boards are free to convert to that if required,
but here is a removal patch that could be applied in the meantime.Signed-off-by: Simon Glass
Reviewed-by: Heiko Schocher
Reviewed-by: Tom Rini