29 Feb, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
07 Feb, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
07 Jan, 2020
1 commit
-
The SPL does not have DM enabled and therefor still needs to use the
hardware watchdog interface provided by the imx-watchdog driver.Fixes: broken reset command after f2929d11a639 ("watchdog: imx: Use
immediate reset bits for expire_now")Signed-off-by: Claudius Heine
05 Dec, 2019
2 commits
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
-
MTD must be enabled when there is a SPI NOR flash using the
SPI_FLASH_MTD config entry.Signed-off-by: Miquel Raynal
Reviewed-by: Boris Brezillon
21 Nov, 2019
2 commits
-
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.Cc: Wolfgang Denk
Cc: Joe Hershberger
Cc: Patrick Delaunay
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Simon Goldschmidt -
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not. In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.Cc: Wolfgang Denk
Cc: Joe Hershberger
Signed-off-by: Tom Rini
13 Nov, 2019
1 commit
-
Move this symbol to Kconfig. As part of this we can drop a UBI-specific
symbol that was a stop-gap for not having this particular symbol in
Kconfig.Signed-off-by: Tom Rini
08 Nov, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
04 Nov, 2019
1 commit
-
Signed-off-by: Claudius Heine
08 Oct, 2019
1 commit
-
move WATCHDOG_TIMEOUT_MSECS to Kconfig and fix
all board defconfigs.Signed-off-by: Heiko Schocher
Reviewed-by: Stefan Roese
Acked-by: Lukasz Majewski
Acked-by: Martyn Welch
Signed-off-by: Stefan Roese
23 Sep, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
26 Aug, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_SYS_SPI_U_BOOT_OFFSSigned-off-by: Hannes Schmelzer
[trini: Expose this for SPL_SPI_SUNXI for now]
Signed-off-by: Tom Rini
24 Aug, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_FSL_USDHCSigned-off-by: Adam Ford
[trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list]
Signed-off-by: Tom Rini
20 Jul, 2019
3 commits
-
This patch enables DM I2C for DHCOM i.MX6 PDK2 boards and
removes non DM I2C code. The I2C EEPROM with ethaddr (MAC)
is defined in the device tree. Use UCLASS_I2C_EEPROM
to find the device by fixed hardware path and read the ethaddr.Tested with DHCOM i.MX6dl and DHCOM i.MX6q.
Signed-off-by: Ludwig Zenz
Reviewed-by: Marek Vasut -
Configure fitImage for U-Boot with a device tree for imx6 quad/dual
and duallite/solo. This enables to support the imx6 derivates
quad/dual/duallite/solo with a single binary.Signed-off-by: Ludwig Zenz
Reviewed-by: Marek Vasut -
Enable DM support for regulators and fixed regulator driver and
convert USB Vbus control over to the regulators defined in DT.Signed-off-by: Marek Vasut
Cc: Ludwig Zenz
Cc: Stefano Babic
Tested-by: Ludwig Zenz
23 Jun, 2019
1 commit
-
Converted to use fsl_esdhc_imx for i.MX platforms.
Signed-off-by: Yangbo Lu
Tested-by: Steffen Dirkwinkel
Reviewed-by: Peng Fan
Reviewed-by: Lukasz Majewski
Reviewed-by: Martyn Welch
Acked-by: Jason Liu
21 Jun, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
11 Jun, 2019
7 commits
-
Enable DM SPI and SF support on DHCOM iMX6 PDK2.
Convert board code to match the DM support.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Ludwig Zenz
Cc: Stefano Babic -
Enable DM USB host support on DHCOM iMX6 PDK2.
Convert board code to match the DM support.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Ludwig Zenz
Cc: Stefano Babic -
Enable DM SATA support on DHCOM iMX6 PDK2.
Convert board code to match the DM support.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Ludwig Zenz
Cc: Stefano Babic -
Enable DM block and DM MMC support on DHCOM iMX6 PDK2.
Convert board code to match the DM support.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Ludwig Zenz
Cc: Stefano Babic -
Enable DM GPIO support on DHCOM iMX6 PDK2 and fix up board code
where applicable.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Ludwig Zenz
Cc: Stefano Babic -
Enable DM pin control support on DHCOM iMX6 PDK2.
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Ludwig Zenz
Cc: Stefano Babic -
Import DHCOM iMX6 PDK2 device tree from Linux 5.1.1 b724e9356404 .
Enable DT control in full U-Boot .Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Ludwig Zenz
Cc: Stefano Babic
27 May, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
30 Apr, 2019
2 commits
-
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing
values.Signed-off-by: Simon Goldschmidt
[trini: Re-run migration]
Signed-off-by: Tom Rini -
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
26 Mar, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_SF_DEFAULT_BUS
CONFIG_SF_DEFAULT_CS
CONFIG_SF_DEFAULT_MODE
CONFIG_SF_DEFAULT_SPEEDI use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.Signed-off-by: Patrick Delaunay
19 Jan, 2019
1 commit
-
The bounce buffer is used by a few drivers (most of the MMC drivers)
to overcome limitations in their respective DMA implementation.This moves the configuration to Kconfig and makes it user-selectable
(even though it will be a required feature to make those drivers
work): the expected usage is for drivers depending on this to 'select'
it unconditionally from their respective Kconfig (see follow-up
patches).This commit includes a full migration using moveconfig.py to ensure
that each commit compiles. To ensure bisectability we update
dependencies of various drivers to now select BOUNCE_BUFFER when needed.[trini: Squash all patches to ensure bisectability]
Signed-off-by: Tom Rini
Signed-off-by: Philipp Tomsich
Reviewed-by: Otavio Salvador [dw_mmc portion]
Reviewed-by: Fabio Estevam [mxsmmc portion]
Reviewed-by: Simon Glass [tegra portion]
08 Jan, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
22 Oct, 2018
1 commit
-
Move this option to Kconfig and tidy up the config file of eight
boards which use it.Signed-off-by: Xiaoliang Yang
18 Aug, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_MII
CONFIG_DRIVER_TI_EMACSigned-off-by: Adam Ford
Acked-by: Jagan Teki
Acked-by: Joe Hershberger
17 Aug, 2018
1 commit
-
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.Signed-off-by: Tom Rini
23 Jul, 2018
1 commit
-
In preparation for delivery bottlenecks, enable support for GigaDevice, Macronix, and Winbond nor flash chips.
Signed-off-by: Ludwig Zenz
04 Jun, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
28 Apr, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_SPIThis partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver. For now, just update
the CONFIG tests. This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.Signed-off-by: Adam Ford
Signed-off-by: Tom Rini
12 Apr, 2018
1 commit
-
Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all
configurations using it to Kconfig.Signed-off-by: Marek Vasut
Cc: Tom Rini