Eric Lee / smarc-uboot

29 Feb, 2020

1 commit

04 Feb, 2020

1 commit

  • 7d9dbeafe   configs: am57xx_evm: Enable Android commands ... Browse Code »

    Enable Android commands that will be needed for Android 10 boot flow
    implementation, for all AM57x variants. Commands enabled:

    1. 'abootimg':
    - CONFIG_CMD_ABOOTIMG=y
    2. 'ab_select':
    - CONFIG_ANDROID_AB=y
    - CONFIG_CMD_AB_SELECT=y
    3. 'avb':
    - CONFIG_LIBAVB=y
    - CONFIG_AVB_VERIFY=y
    - CONFIG_CMD_AVB=y

    While at it, resync defconfig files with "make savedefconfig".

    Signed-off-by: Sam Protsenko
    Signed-off-by: Lokesh Vutla

    Sam Protsenko
     

23 Jan, 2020

1 commit

16 Jan, 2020

1 commit

11 Jan, 2020

1 commit

  • b84acf105   dtimg/am57xx_evm_defconfig: Rename dtimg to adtimg ... Browse Code »

    Rename the existing 'dtimg' command to 'adtimg', in order to:
    - Suggest the Android origins and scope
    - Be consistent with the upcoming 'abootimg' command (naming
    suggested by Simon [*])

    The change in _not_ backward compatible, but its benefits outweigh its
    downsides, given that we don't expect active users of 'dtimg' today.

    Perform the rename in several steps:
    1. Rename *.c file and Kconfig symbol. This should allow
    'git log --follow' to properly track the history of 'adtimg.c'
    2. 's/dtimg/adtimg/g' in the internal namespace of 'adtimg.c'

    ELF comparison [**] before and after shows no functional change.

    [*] https://patchwork.ozlabs.org/patch/1182212/#2291600
    [**] diff -u
    Signed-off-by: Eugeniu Rosca
    Reviewed-by: Simon Glass
    Reviewed-by: Sam Protsenko

    Eugeniu Rosca
     

05 Dec, 2019

2 commits

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

13 Nov, 2019

1 commit

08 Nov, 2019

1 commit

23 Sep, 2019

1 commit

26 Aug, 2019

1 commit

01 Aug, 2019

2 commits

05 May, 2019

1 commit

  • 623de3f08   Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SUPPORT_EMMC_BOOT

    As requested by Michal Simek , these boards
    have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated:

    xilinx_zynqmp_zc1275_revB
    xilinx_zynqmp_zc1751_xm018_dc4
    xilinx_zynqmp_zc1751_xm019_dc5
    xilinx_zynqmp_zcu100_revC
    xilinx_zynqmp_zcu102_rev1_0
    xilinx_zynqmp_zcu102_revA
    xilinx_zynqmp_zcu102_revB
    xilinx_zynqmp_zcu104_revA
    xilinx_zynqmp_zcu104_revC
    xilinx_zynqmp_zcu106_revA
    xilinx_zynqmp_zcu111_revA

    Signed-off-by: Alex Kiernan
    Acked-by: Lukasz Majewski
    Acked-by: Patrick Delaunay
    Acked-by: Ramon Fried
    Reviewed-by: Andy Shevchenko
    Tested-by: Sébastien Szymanski

    Alex Kiernan
     

30 Apr, 2019

2 commits

26 Mar, 2019

1 commit

  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

09 Feb, 2019

1 commit