09 Mar, 2020
1 commit
-
Enable configs to support eMMC boot.
Signed-off-by: Faiz Abbas
Signed-off-by: Lokesh Vutla
29 Feb, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
07 Feb, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
04 Feb, 2020
5 commits
-
Enable CONFIG_DA8XX_GPIO to enable GPIO support.
Signed-off-by: Faiz Abbas
Signed-off-by: Lokesh Vutla -
Enable PCA953x IO expander to control MMC/SD power lines.
Signed-off-by: Vignesh Raghavendra
Signed-off-by: Lokesh Vutla -
Enable DFU, Fastboot and USB mass storage gadget related configs
Signed-off-by: Vignesh Raghavendra
Signed-off-by: Lokesh Vutla -
Enable USB Gadget for R5 SPL, A72 SPL and A72 U-Boot to support DFU boot
Signed-off-by: Vignesh Raghavendra
Signed-off-by: Lokesh Vutla -
The current environment offset overlaps with the sysfw area and whenever
environment is saved in the redundant slot, it overwrites sysfw.itb. Fix
the offset to prevent this.Signed-off-by: Faiz Abbas
Signed-off-by: Lokesh Vutla
23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
20 Jan, 2020
4 commits
-
Enable I2C and EEPROM related configs for A72 SPL/U-Boot.
Signed-off-by: Vignesh Raghavendra
Signed-off-by: Andreas Dannenberg
Signed-off-by: Lokesh Vutla -
Add config to save and read back environment from eMMC.
Signed-off-by: Faiz Abbas
Signed-off-by: Lokesh Vutla -
Add configs for ADMA Support.
Signed-off-by: Faiz Abbas
Signed-off-by: Lokesh Vutla -
Enable USB host and device related configs.
Signed-off-by: Vignesh Raghavendra
Signed-off-by: Lokesh Vutla
09 Dec, 2019
1 commit
-
Enable configs related to DMA and Ethernet so as to support networking at
U-Boot promptSigned-off-by: Vignesh Raghavendra
Acked-by: Joe Hershberger
Reviewed-by: Grygorii Strashko
04 Dec, 2019
2 commits
-
Like in Linux, just use CONFIG_MTD to compile the MTD stack.
Signed-off-by: Miquel Raynal
Reviewed-by: Boris Brezillon -
CONFIG_MTD must be reserved for the MTD core. Like any other
subsystem, prefix the symbol by DM when it comes to DM support.Signed-off-by: Miquel Raynal
Reviewed-by: Boris Brezillon
[trini: Add Kconfig files]
Signed-off-by: Tom Rini
21 Nov, 2019
2 commits
-
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.Cc: Wolfgang Denk
Cc: Joe Hershberger
Cc: Patrick Delaunay
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Simon Goldschmidt -
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not. In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.Cc: Wolfgang Denk
Cc: Joe Hershberger
Signed-off-by: Tom Rini
12 Nov, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
08 Nov, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
24 Oct, 2019
3 commits
-
- Add Universal Flash Storage (UFS) support
-
Enable HBMC and HyperFlash in A72 SPL and A72 U-Boot
Signed-off-by: Vignesh Raghavendra
Reviewed-by: Stefan Roese -
Enable SCSI and UFS related configs.
Signed-off-by: Faiz Abbas
12 Oct, 2019
2 commits
-
Enable CONFIG_DISPLAY_CPUINFO so that cpuinfo is printed during boot.
Signed-off-by: Lokesh Vutla
-
J721E uses TISCI protocol to reset the device and does not
support PSCI reset. So disable PSCI reset.Signed-off-by: Lokesh Vutla
11 Oct, 2019
2 commits
-
The A72 U-boot can support early booting of any of the R5F or C66x
or C71x remote processors from U-boot prompt to achieve various system
usecases before booting the Linux kernel. Update the default BOOTCOMMAND
to provide an automatic and easier way to start various remote processors
through added environment variables.Signed-off-by: Jean-Jacques Hiblot
Signed-off-by: Suman Anna -
Enable R5F and DSP remoteproc drivers for j721e running on a72.
Signed-off-by: Lokesh Vutla
23 Sep, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
26 Aug, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_SYS_SPI_U_BOOT_OFFSSigned-off-by: Hannes Schmelzer
[trini: Expose this for SPL_SPI_SUNXI for now]
Signed-off-by: Tom Rini
01 Aug, 2019
1 commit
-
The K3 System Controller driver is used for loading and starting
the System Firmware, and is used only on R5 SPL. It need not be
enabled and built for the A72 U-Boot and SPL, so disable it from
the j721e_evm_a72 defconfig.While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and
CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A72 SPL.Signed-off-by: Suman Anna
27 Jul, 2019
1 commit
-
Add initial defconfig support for J721e that runs on A72.
Signed-off-by: Lokesh Vutla
[trini: Add MAINTAINERS entry]
Signed-off-by: Tom Rini