Eric Lee / smarc-uboot

29 Feb, 2020

1 commit

07 Feb, 2020

1 commit

23 Jan, 2020

1 commit

23 Dec, 2019

1 commit

05 Dec, 2019

2 commits

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

13 Nov, 2019

1 commit

27 May, 2019

2 commits

26 Mar, 2019

1 commit

  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

14 Nov, 2018

1 commit

  • cbabe7f87   configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS ... Browse Code »

    Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
    that had been enabling it turn it on by hand. This exposed that we had
    not yet migrated CMD_MTDPARTS fully, so do so now.

    Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()")
    Signed-off-by: Tom Rini

    Tom Rini
     

18 Aug, 2018

2 commits

  • 8ccf98b1c   Convert CONFIG_MISC_INIT_R to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_MISC_INIT_R

    Signed-off-by: Adam Ford
    [trini: Update the defaults logic slightly]
    Signed-off-by: Tom Rini

    Adam Ford
     
  • ca0d535ed   Migrate bootlimit to Kconfig ... Browse Code »

    Migrate boards which set bootlimit in the environment to Kconfig.

    We exclude gurnard_defconfig which includes a bootlimit=, but doesn't set
    CONFIG_BOOTCOUNT_LIMIT, so we'd fail to include a bootlimit setting
    if we migrated it.

    display5_defconfig and display5_factory_defconfig share a SYS_CONFIG_NAME,
    but only display5_defconfig enables CONFIG_BOOTCOUNT_LIMIT, so we fail to
    set bootlimit= in display5_factory_defconfig. This is okay because the
    display5_factory_defconfig doesn't need to have it set, as it is only
    meant to prepare the board in the factory.

    Environment changes for all modified configs as seen from buildman:

    boards.cfg is up to date. Nothing to do.
    Summary of 3 commits for 32 boards (8 threads, 1 job per thread)
    01: Merge git://git.denx.de/u-boot-x86
    arm: + draco etamin rastaban pxm2 display5 thuban rut
    02: Add BOOTCOUNT_BOOTLIMIT to set reboot limit
    03: Migrate bootlimit to Kconfig
    - display5_factory: bootlimit=3

    Signed-off-by: Alex Kiernan
    Reviewed-by: Lukasz Majewski

    Alex Kiernan
     

11 Jul, 2018

1 commit

15 May, 2018

1 commit

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

17 Apr, 2018

1 commit

09 Apr, 2018

2 commits

26 Feb, 2018

1 commit

  • 39bcbb774   bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR ... Browse Code »

    Migrate the users of CONFIG_SYS_BOOTCOUNT_ADDR to Kconfig. We can
    provide a default for BOOTCOUNT_AM33XX as that's a specific part of the
    RTC in use. We can also provide a default for ARCH_LS1043A and
    ARCH_LS1021A as they had been previously calculated and their symbols
    are in Kconfig. In the case of other QE-enabled platforms, they are not
    so we must update the relevant defconfig files. The previous default
    only applied in some cases, even on a specific SoC family.

    Reviewed-by: Lukasz Majewski
    Reviewed-by: Alex Kiernan
    Signed-off-by: Tom Rini

    Tom Rini
     

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

15 Feb, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Nov, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

02 Sep, 2017

1 commit

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

09 Aug, 2017

1 commit

08 Aug, 2017

1 commit

26 Jul, 2017

1 commit

25 Jul, 2017

1 commit

19 Jun, 2017

1 commit

23 May, 2017

4 commits

22 May, 2017

1 commit

  • a1dc980d8   Convert CONFIG_CMD_EEPROM et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_CMD_EEPROM
    CONFIG_CMD_EEPROM_LAYOUT
    CONFIG_EEPROM_LAYOUT_HELP_STRING

    Signed-off-by: Simon Glass
    Reviewed-by: Tom Rini
    [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
    platforms]
    Signed-off-by: Tom Rini

    Simon Glass