Eric Lee / smarc-uboot

10 Jan, 2020

2 commits

21 Nov, 2019

1 commit

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     

24 May, 2019

1 commit

  • 88449833d   configs: remove CONFIG_SYS_DSPI_XX references ... Browse Code »

    This patch removes CONFIG_SYS_DSPI_XX options from
    include/configs "m68k" .h board files, since CTAR
    registers are now set with default values in the cf_spi
    driver initialization, and configurable by devicetree.

    Note, these options cannot be totally removed from the
    whitelist, since still used from boards using fsl_dspi.c
    (mostly arm-based boards).

    Reviewed-by: Simon Glass
    Signed-off-by: Angelo Dureghello

    Angelo Dureghello
     

26 Mar, 2019

2 commits

  • abe66b1b5   Convert CONFIG_ENV_SPI_* to Kconfig ... Browse Code »
    24

    This converts the following to Kconfig:
    CONFIG_ENV_SPI_BUS
    CONFIG_ENV_SPI_CS
    CONFIG_ENV_SPI_MAX_HZ
    CONFIG_ENV_SPI_MODE

    Most of time these value are not needed, CONFIG_SF_DEFAULT
    with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
    to force the associated value for the environment.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     
  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

27 Nov, 2018

1 commit

  • 35f9d9bdd   spi: Zap CONFIG_HARD_SPI ... Browse Code »

    In legacy CONFIG_HARD_SPI initalizing spi_init code, which
    was removed during dm conversion cleanup.

    So remove the dead instances of CONFIG_HARD_SPI, and related
    code.

    Signed-off-by: Jagan Teki

    Jagan Teki
     

06 Aug, 2018

1 commit

23 Jul, 2018

1 commit

07 May, 2018

1 commit

  • 83d290c56   SPDX: Convert all of our single license tags to Linux Kernel style ... Browse Code »
    56

    When U-Boot started using SPDX tags we were among the early adopters and
    there weren't a lot of other examples to borrow from. So we picked the
    area of the file that usually had a full license text and replaced it
    with an appropriate SPDX-License-Identifier: entry. Since then, the
    Linux Kernel has adopted SPDX tags and they place it as the very first
    line in a file (except where shebangs are used, then it's second line)
    and with slightly different comment styles than us.

    In part due to community overlap, in part due to better tag visibility
    and in part for other minor reasons, switch over to that style.

    This commit changes all instances where we have a single declared
    license in the tag as both the before and after are identical in tag
    contents. There's also a few places where I found we did not have a tag
    and have introduced one.

    Signed-off-by: Tom Rini

    Tom Rini
     

09 Apr, 2018

1 commit

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

14 Feb, 2018

1 commit

20 Jan, 2018

1 commit

  • e6e5ecc5e   m68k: Drop unreferenced CONFIG_* defines ... Browse Code »

    The following config symbols are only defined once and never referenced
    anywhere else:

    CONFIG_AMCORE
    CONFIG_ASTRO5373L
    CONFIG_M52277EVB
    CONFIG_M5253DEMO
    CONFIG_M5253EVBE
    CONFIG_M5275EVB
    CONFIG_M54418TWR
    CONFIG_STMARK2

    Most of them are config symbols named after the respective boards which
    seems to have been a standard practice at some point.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

06 Nov, 2017

1 commit

18 Aug, 2017

1 commit

  • a373024e7   m68k: add board stmark2, mcf5441x based ... Browse Code »

    Sysam stmark2 board is a generic and fully (hw and sw) open board, with
    a mcf54415 Coldfire CPU, 128MB of DDR2, 16MB of SPI flash and SD card
    as non volatile memories, and a wifi module included on-board.
    The board is actually used mainly for Coldfire custodian testing activity
    related to the mcf5441x Coldfire family.

    For further information please see: http://sysam.it/cff_stmark2.html

    Signed-off-by: Angelo Dureghello
    ---

    Changes in v2:
    - remove CMD_REGINFO
    - add board information in commit message

    Angelo Dureghello