Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

05 Dec, 2019

2 commits

04 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

08 Nov, 2019

1 commit

23 Sep, 2019

1 commit

26 Aug, 2019

3 commits

  • 1ee774d20   Convert CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SYS_SPI_U_BOOT_OFFS

    Signed-off-by: Hannes Schmelzer
    [trini: Expose this for SPL_SPI_SUNXI for now]
    Signed-off-by: Tom Rini

    Hannes Schmelzer
     
  • c680df7e8   mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig ... Browse Code »

    Convert CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig, update defconfigs,
    headers and whitelist.

    Please note that this symbol already was used in Kconfig
    (imply in CONFIG_NAND_ATMEL) which did not work, since this symbol was
    not available in Kconfig. This changes now with this patch and all
    boards with CONFIG_NAND_ATMEL will have BBT enabled. Which is what
    I also need on my GARDENA AT91SAM based board.

    Signed-off-by: Stefan Roese
    Cc: Eugen Hristev
    Cc: Miquel Raynal
    Cc: Gregory CLEMENT
    [trini: Rework such that the configs are unchanged to start with]
    Signed-off-by: Tom Rini

    Stefan Roese
     
  • 1bf330150   Convert CONFIG_ARCH_CPU_INIT to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_ARCH_CPU_INIT

    Signed-off-by: Adam Ford
    Acked-by: Chris Packham
    Tested-by: Felix Brack

    Adam Ford
     

02 Aug, 2019

1 commit

  • 37304aaf6   Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig ... Browse Code »
    4

    This converts the following to Kconfig:
    CONFIG_USE_PREBOOT
    CONFIG_PREBOOT

    Both are together in one commit, since otherwise the former causes kconfig
    to define the latter, which gives duplicate symbol errors.

    Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
    backslash lands in the wrong place. Similarly with socfpga_vining_fpga.

    Signed-off-by: Simon Glass

    Simon Glass
     

30 Apr, 2019

2 commits

12 Apr, 2019

1 commit

26 Mar, 2019

1 commit

  • abe66b1b5   Convert CONFIG_ENV_SPI_* to Kconfig ... Browse Code »
    24

    This converts the following to Kconfig:
    CONFIG_ENV_SPI_BUS
    CONFIG_ENV_SPI_CS
    CONFIG_ENV_SPI_MAX_HZ
    CONFIG_ENV_SPI_MODE

    Most of time these value are not needed, CONFIG_SF_DEFAULT
    with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
    to force the associated value for the environment.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

05 Feb, 2019

1 commit

  • 94f453ea3   pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig ... Browse Code »

    This patch adds DM_PCI support to the MVEBU PCIe driver. This is
    necessary, since all PCI drivers have to be moved to DM (driver model)
    until the v2019.07 release.

    To not break git bisect'ablility, this patch also moves CONFIG_PCI_MVEBU
    from config headers to the defconfig files.

    Signed-off-by: Stefan Roese
    Cc: Dirk Eibach
    Cc: Mario Six
    Cc: Chris Packham
    Cc: Phil Sutter
    Cc: Marek Behún
    Cc: VlaoMao

    Stefan Roese
     

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

04 Jun, 2018

1 commit

15 May, 2018

1 commit

17 Apr, 2018

1 commit

12 Apr, 2018

1 commit

09 Apr, 2018

1 commit

08 Apr, 2018

1 commit

14 Feb, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

13 Dec, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

26 Sep, 2017

1 commit

15 Aug, 2017

1 commit

12 Aug, 2017

2 commits

09 Aug, 2017

1 commit

08 Aug, 2017

1 commit

12 Jul, 2017

1 commit

19 Jun, 2017

1 commit

14 Mar, 2017

1 commit

28 Jan, 2017

1 commit