Eric Lee / smarc-uboot

02 Sep, 2020

1 commit

25 Jun, 2020

1 commit

  • d7c428010   configs: ls1043aqds: Configure QSPI related configs ... Browse Code »

    LS1043A-QDS has "s25fl128s" flash of size 16M with 64K sector size.
    The board requires few spi-flash related configs to be updated in TFA
    and QSPI _defconfigs.

    Following are the changes:
    - Define/Update CONFIG_ENV_ADDR
    - Unset CONFIG_SPI_FLASH_BAR
    - Correct CONFIG_ENV_SECT_SIZE
    - Enable CONFIG_SYS_RELOC_GD_ENV_ADDR

    Signed-off-by: Kuldeep Singh

    Kuldeep Singh
     

01 May, 2020

1 commit

30 Mar, 2020

1 commit

23 Jan, 2020

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

22 Aug, 2019

1 commit

27 May, 2019

1 commit

30 Apr, 2019

1 commit

03 Mar, 2019

1 commit

19 Feb, 2019

1 commit

08 Jan, 2019

1 commit

14 Nov, 2018

1 commit

27 Sep, 2018

1 commit

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 Jul, 2018

1 commit

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

09 Apr, 2018

1 commit

23 Feb, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Nov, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

2 commits

08 Aug, 2017

1 commit

26 Jul, 2017

1 commit

01 May, 2017

1 commit

25 Apr, 2017

1 commit

10 Mar, 2017

1 commit

  • 285226785   Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigs ... Browse Code »

    In some cases this is absolutely required, so select this for some secure
    features. This also requires migration of RSA_FREESCALE_EXP

    Cc: Ruchika Gupta
    Cc: Poonam Aggrwal
    Cc: Naveen Burmi
    Cc: Po Liu
    Cc: Shengzhou Liu
    Cc: Priyanka Jain
    Cc: Sumit Garg
    Cc: Shaohui Xie
    Cc: Chunhe Lan
    Cc: Feng Li
    Cc: Alison Wang
    Cc: Mingkai Hu
    Cc: York Sun
    Cc: Saksham Jain
    Cc: Prabhakar Kushwaha
    Signed-off-by: Tom Rini

    Tom Rini
     

28 Jan, 2017

2 commits

24 Jan, 2017

1 commit

22 Jan, 2017

1 commit

19 Jan, 2017

1 commit

05 Jan, 2017

1 commit

04 Dec, 2016

1 commit

  • bfb380b30   cmd: move CMD_PXE to Kconfig ... Browse Code »

    Currently, CMD_PXE is forcibly enabled in config_distro_defaults.h, so
    that general purpose distributions can rely on it being defined. This
    header is included, under conditions or not, by various archs or
    famillies of archs / SoCs.

    However, it is very possible that boards based on those SoCs will not
    have a physical ethernet connector at all, even if the have a MAC; for
    example, the Nanopi Neo AIR (sunxi H3) does not. It is also possible
    that network booting is absolutely not necessary for a device.

    However, it is not possible to disable the PXE command, as it is
    forcibly enabled and is non-configurable.

    But it turns out we already have a config option to build a distro-ready
    image, in the name of DISTRO_DEFAULTS.

    Move CMD_PXE out of the hard-coded config_distro_defaults.h into a
    Kconfig option, that gets selected by DISTRO_DEFAULTS when it is set.

    Signed-off-by: "Yann E. MORIN"
    Cc: Joe Hershberger
    [trini: Make it select MENU, run moveconfig.py]
    Signed-off-by: Tom Rini

    Yann E. MORIN