Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

08 Jan, 2020

1 commit

04 Dec, 2019

1 commit

21 Nov, 2019

1 commit

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     

18 Oct, 2019

1 commit

02 Aug, 2019

1 commit

  • 37304aaf6   Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig ... Browse Code »
    4

    This converts the following to Kconfig:
    CONFIG_USE_PREBOOT
    CONFIG_PREBOOT

    Both are together in one commit, since otherwise the former causes kconfig
    to define the latter, which gives duplicate symbol errors.

    Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
    backslash lands in the wrong place. Similarly with socfpga_vining_fpga.

    Signed-off-by: Simon Glass

    Simon Glass
     

30 Apr, 2019

1 commit

08 Jan, 2019

1 commit

13 Dec, 2018

1 commit

  • 03fb0958c   qemu-arm: Add persistent environment support ... Browse Code »

    Currently on qemu-arm platforms environment is kept in RAM. Instead
    use pflash device 1 to provide persistent environment support across
    device reset.

    Also (optionally) provide support for persistent environment across
    qemu machine OFF/ON using following instructions:

    - Create envstore.img using qemu-img:
    qemu-img create -f raw envstore.img 64M
    - Add a pflash drive parameter to the command line:
    -drive if=pflash,format=raw,index=1,file=envstore.img

    Signed-off-by: Sumit Garg

    Sumit Garg
     

15 Nov, 2018

1 commit

14 Nov, 2018

1 commit

24 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

20 Jul, 2018

1 commit

  • b19886b94   ARM: qemu-arm: enable RTC ... Browse Code »

    QEMU provides an emulated ARM AMBA PrimeCell PL031 RTC.

    The patch sets the base address in the board include file according to the
    definition in hw/arm/virt.c of the QEMU source. It defines the Kconfig
    option for the existing driver, and enables the RTC driver in
    qemu_arm64_defconfig and qemu_arm_defconfig as well as the date command.

    We need an RTC to provide the GetTime() runtime service in the UEFI
    subsystem.

    Signed-off-by: Heinrich Schuchardt
    Reviewed-by: Tuomas Tynkkynen
    Tested-by: Tuomas Tynkkynen
    Signed-off-by: AKASHI Takahiro

    Heinrich Schuchardt
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

20 Jan, 2018

1 commit

  • ddcca7305   ARM: qemu-arm: Add support for AArch64 ... Browse Code »

    This adds support for '-machine virt' on AArch64. This is rather simple:
    we just add TARGET_QEMU_ARM_xxBIT to select a few different Kconfig
    symbols, provide the ARMv8 memory map from the board file and add a new
    defconfig based on the 32-bit defconfig.

    Signed-off-by: Tuomas Tynkkynen
    Reviewed-by: Tom Rini

    Tuomas Tynkkynen