Eric Lee / smarc-uboot

26 Mar, 2019

1 commit

  • abe66b1b5   Convert CONFIG_ENV_SPI_* to Kconfig ... Browse Code »
    24

    This converts the following to Kconfig:
    CONFIG_ENV_SPI_BUS
    CONFIG_ENV_SPI_CS
    CONFIG_ENV_SPI_MAX_HZ
    CONFIG_ENV_SPI_MODE

    Most of time these value are not needed, CONFIG_SF_DEFAULT
    with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
    to force the associated value for the environment.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

08 Feb, 2019

1 commit

07 Feb, 2019

1 commit

  • 6d8251783   configs: Don't use SPI_FLASH_BAR as default ... Browse Code »
    12

    Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
    don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
    4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
    renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
    not break functionality.

    Signed-off-by: Vignesh R
    Tested-by: Simon Goldschmidt
    Tested-by: Stefan Roese
    Tested-by: Horatiu Vultur
    Reviewed-by: Jagan Teki
    Tested-by: Jagan Teki #zynq-microzed

    Vignesh R
     

05 Feb, 2019

1 commit

  • 94f453ea3   pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig ... Browse Code »

    This patch adds DM_PCI support to the MVEBU PCIe driver. This is
    necessary, since all PCI drivers have to be moved to DM (driver model)
    until the v2019.07 release.

    To not break git bisect'ablility, this patch also moves CONFIG_PCI_MVEBU
    from config headers to the defconfig files.

    Signed-off-by: Stefan Roese
    Cc: Dirk Eibach
    Cc: Mario Six
    Cc: Chris Packham
    Cc: Phil Sutter
    Cc: Marek Behún
    Cc: VlaoMao

    Stefan Roese
     

14 Nov, 2018

1 commit

  • cbabe7f87   configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS ... Browse Code »

    Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
    that had been enabling it turn it on by hand. This exposed that we had
    not yet migrated CMD_MTDPARTS fully, so do so now.

    Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()")
    Signed-off-by: Tom Rini

    Tom Rini
     

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

23 Jul, 2018

1 commit

04 Jun, 2018

1 commit

15 May, 2018

1 commit

17 Apr, 2018

1 commit

14 Apr, 2018

1 commit

12 Apr, 2018

1 commit

09 Apr, 2018

1 commit

08 Apr, 2018

1 commit

14 Feb, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

09 Feb, 2018

1 commit

  • a5a37567c   Convert CONFIG LIB_HW_RAND to Kconfig ... Browse Code »

    config_fallbacks.h had some logic to automatically select
    LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't
    already selected. By migrating LIB_HW_RAND to Kconfig, we can
    remove this check from config_fallbacks.h and put it into Kconfig

    Signed-off-by: Adam Ford
    Reviewed-by: Lukasz Majewski
    [trini: Turn into a choice, add NET_RANDOM_ETHADDR]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

26 Sep, 2017

1 commit

02 Sep, 2017

1 commit

  • ecad7051b   configs: Migrate all of the existing USB symbols, except fastboot ... Browse Code »
    20

    This syncs all of the currently Kconfig'd symbols out of the headers and
    into the defconfig files. This has two exceptions, first am335x_evm
    needs to be converted to DM in SPL and then it can stop undef'ing
    CONFIG_DM_USB. Leaving this as-is results in a build failure, and
    without work, run time failure. The other case is am43xx_evm.h and in
    turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB
    host mode in SPL, but still desire to have gadget mode in U-Boot proper.

    Signed-off-by: Tom Rini

    Tom Rini
     

15 Aug, 2017

2 commits

12 Aug, 2017

1 commit

09 Aug, 2017

1 commit

08 Aug, 2017

1 commit

19 Jun, 2017

1 commit

23 May, 2017

1 commit

16 May, 2017

1 commit

14 Mar, 2017

1 commit

28 Jan, 2017

1 commit

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

28 Oct, 2016

1 commit

12 Oct, 2016

1 commit

27 Sep, 2016

1 commit

20 Sep, 2016

1 commit

  • 9b1b6d422   Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL" ... Browse Code »

    This reverts commit 90c08d9e08c7a108ab904f3bbdeb558081757892.

    I took a closer look at this after the commit was applied, and found
    CONFIG_SYS_MALLOC_F_LEN=0x2000 was too much. 8KB memory for SPL is
    actually too big for some boards. Perhaps 0x800 is enough, but the
    situation varies board by board.

    Let's postpone our decision until we come up with a better idea.

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Simon Glass

    Masahiro Yamada
     

17 Sep, 2016

3 commits