Eric Lee / smarc-uboot

26 Mar, 2019

2 commits

  • abe66b1b5   Convert CONFIG_ENV_SPI_* to Kconfig ... Browse Code »
    24

    This converts the following to Kconfig:
    CONFIG_ENV_SPI_BUS
    CONFIG_ENV_SPI_CS
    CONFIG_ENV_SPI_MAX_HZ
    CONFIG_ENV_SPI_MODE

    Most of time these value are not needed, CONFIG_SF_DEFAULT
    with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
    to force the associated value for the environment.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     
  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

07 Feb, 2019

1 commit

  • 6d8251783   configs: Don't use SPI_FLASH_BAR as default ... Browse Code »
    12

    Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
    don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
    4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
    renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
    not break functionality.

    Signed-off-by: Vignesh R
    Tested-by: Simon Goldschmidt
    Tested-by: Stefan Roese
    Tested-by: Horatiu Vultur
    Reviewed-by: Jagan Teki
    Tested-by: Jagan Teki #zynq-microzed

    Vignesh R
     

07 Dec, 2018

1 commit

  • 088d52cfa   driver/ifc: replace __ilog2 with LOG2 macro ... Browse Code »

    Replaces __ilog2 function call with LOG2 macro, required to
    use macros in global variables.

    Also, corrects the value passed in LOG2 for some PowerPC
    platforms. Minimum value that can be configured is is 64K
    for IFC IP.

    Signed-off-by: Pankit Garg
    Signed-off-by: Rajesh Bhagat
    [YS: fix white space around operator]
    Reviewed-by: York Sun

    Rajesh Bhagat
     

20 Oct, 2018

1 commit

06 Oct, 2018

1 commit

  • 6c6add602   configs: drop CONFIG_SYS_EXTRA_ENV_RELOC ... Browse Code »

    Instead of manually specifying CONFIG_SYS_EXTRA_ENV_RELOC
    for every board that needs it, it shouldn't hurt to let
    initr_reloc_global_data() always relocate gd->env_addr
    unless we know this pointer is outside the initial binary.

    To achieve this, the relocation is omitted if
    CONFIG_ENV_ADDR is defined (and ENV_IS_EMBEDDED is not).

    Signed-off-by: Simon Goldschmidt

    Simon Goldschmidt
     

28 Sep, 2018

1 commit

18 Aug, 2018

2 commits

27 Jul, 2018

1 commit

24 Jul, 2018

1 commit

23 Jul, 2018

1 commit

11 Jul, 2018

2 commits

07 May, 2018

1 commit

  • 83d290c56   SPDX: Convert all of our single license tags to Linux Kernel style ... Browse Code »
    56

    When U-Boot started using SPDX tags we were among the early adopters and
    there weren't a lot of other examples to borrow from. So we picked the
    area of the file that usually had a full license text and replaced it
    with an appropriate SPDX-License-Identifier: entry. Since then, the
    Linux Kernel has adopted SPDX tags and they place it as the very first
    line in a file (except where shebangs are used, then it's second line)
    and with slightly different comment styles than us.

    In part due to community overlap, in part due to better tag visibility
    and in part for other minor reasons, switch over to that style.

    This commit changes all instances where we have a single declared
    license in the tag as both the before and after are identical in tag
    contents. There's also a few places where I found we did not have a tag
    and have introduced one.

    Signed-off-by: Tom Rini

    Tom Rini
     

09 Apr, 2018

3 commits

16 Mar, 2018

1 commit

  • 6f6b7cfa8   Convert all of CONFIG_CONS_INDEX to Kconfig ... Browse Code »
    14

    This converts the following to Kconfig:
    CONFIG_CONS_INDEX

    We have existing entries for this option in a number of places, with
    different guards on them. They're also sometimes used for things not
    directly inside of the serial driver. First, introduce a new symbol to
    guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
    need this for the serial driver, but for some other use, we can still do
    it. Next, consolidate all of these into the single entry in
    drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that
    we can imply a correct value here to make the defconfig side of this
    smaller.

    Signed-off-by: Adam Ford
    [trini: Rework a lot of the logic here, such that I took authorship from
    Adam, but kept his S-o-B line]
    Signed-off-by: Tom Rini

    Tom Rini
     

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

15 Feb, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 Jan, 2018

1 commit

  • 541d57663   configs: Move SYS_DPAA_QBMAN to Kconfig ... Browse Code »

    The CONFIG_SYS_DPAA_QBMAN define is used by DPAA1 freescale SOCs to
    add device tree fixups that allow deep sleep in Linux. The define was
    placed in header files included by a number of boards, but was not
    explicitly documented in any of the Kconfigs. A description was added
    to the drivers/networking menuconfig and default selection for
    current SOCs that have this part

    Signed-off-by: Ahmed Mansour
    Reviewed-by: York Sun

    Ahmed Mansour
     

27 Dec, 2017

1 commit

13 Dec, 2017

2 commits

06 Nov, 2017

1 commit

04 Sep, 2017

4 commits

  • e090579d0   include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions ... Browse Code »

    This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be
    equal to CONFIG_SYS_CBSIZE in numerous configuration files.

    We remove such definitions in two situations:

    - CONFIG_SYS_CBSIZE is otherwise not defined in the board
    configuration file, which means the default value of
    CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is
    larger.

    - CONFIG_SYS_CBSIZE is defined in the board configuration file, but
    to a value equal or less than 512. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it
    is equal or larger.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 1f20fc53b   include/configs: drop default definitions of CONFIG_SYS_MAXARGS ... Browse Code »

    Now that include/config_fallbacks.h define a sane fallback for
    CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all
    configurations that were using the default value.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 432e39806   include/configs: drop default definitions of CONFIG_SYS_PBSIZE ... Browse Code »
    1

    Now that the fallback value of CONFIG_SYS_PBSIZE in
    include/config_fallbacks.h has been adjusted, remove its definition
    from a large number of board configuration files.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 3784c789e   include/configs: remove CONFIG_SYS_CBSIZE when the default value is used ... Browse Code »

    Now that include/config_fallbacks.h define a sane fallback for
    CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all
    configurations that were using the default value.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini
    [trini: Drop from stih410-b2260.h]
    Signed-off-by: Tom Rini

    Thomas Petazzoni
     

12 Aug, 2017

2 commits

09 Aug, 2017

1 commit

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

26 Jul, 2017

4 commits

  • 337cd3f21   Convert CONFIG_ENV_IS_IN_REMOTE to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_REMOTE

    Signed-off-by: Simon Glass

    Simon Glass
     
  • 91c868fe7   Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_SPI_FLASH

    Signed-off-by: Simon Glass

    Simon Glass
     
  • 85fc970d7   Convert CONFIG_ENV_IS_IN_FLASH to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_FLASH

    Signed-off-by: Simon Glass

    Simon Glass
     
  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

25 Jul, 2017

1 commit