Eric Lee / smarc-uboot

26 Jan, 2019

1 commit

18 Aug, 2018

2 commits

17 Aug, 2018

2 commits

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     
  • 0bdea7c43   CONFIG_SYS_GENERIC_BOARD: Finish migration ... Browse Code »

    While we have long since migrated to CONFIG_SYS_GENERIC_BOARD being
    enabled, we had just a few places left that still referenced or defined
    it. Update.

    Signed-off-by: Tom Rini

    Tom Rini
     

17 May, 2018

1 commit

07 May, 2018

1 commit

  • 83d290c56   SPDX: Convert all of our single license tags to Linux Kernel style ... Browse Code »
    56

    When U-Boot started using SPDX tags we were among the early adopters and
    there weren't a lot of other examples to borrow from. So we picked the
    area of the file that usually had a full license text and replaced it
    with an appropriate SPDX-License-Identifier: entry. Since then, the
    Linux Kernel has adopted SPDX tags and they place it as the very first
    line in a file (except where shebangs are used, then it's second line)
    and with slightly different comment styles than us.

    In part due to community overlap, in part due to better tag visibility
    and in part for other minor reasons, switch over to that style.

    This commit changes all instances where we have a single declared
    license in the tag as both the before and after are identical in tag
    contents. There's also a few places where I found we did not have a tag
    and have introduced one.

    Signed-off-by: Tom Rini

    Tom Rini
     

09 Apr, 2018

5 commits

16 Mar, 2018

1 commit

  • 6f6b7cfa8   Convert all of CONFIG_CONS_INDEX to Kconfig ... Browse Code »
    14

    This converts the following to Kconfig:
    CONFIG_CONS_INDEX

    We have existing entries for this option in a number of places, with
    different guards on them. They're also sometimes used for things not
    directly inside of the serial driver. First, introduce a new symbol to
    guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
    need this for the serial driver, but for some other use, we can still do
    it. Next, consolidate all of these into the single entry in
    drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that
    we can imply a correct value here to make the defconfig side of this
    smaller.

    Signed-off-by: Adam Ford
    [trini: Rework a lot of the logic here, such that I took authorship from
    Adam, but kept his S-o-B line]
    Signed-off-by: Tom Rini

    Tom Rini
     

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

08 Feb, 2018

1 commit

02 Feb, 2018

1 commit

13 Dec, 2017

2 commits

12 Oct, 2017

1 commit

11 Sep, 2017

1 commit

  • c7430d7d5   ipu_common: Let the MX6 IPU clock be calculated in run-time ... Browse Code »

    MX6Q/QP IPU operates at 264MHz and MX6DL IPU at 198MHz.

    When running a SPL target, which supports multiple MX6 variants we cannot
    properly setup the IPU clock frequency via CONFIG_IPUV3_CLK option as
    such decision is done in build-time currently.

    Remove the CONFIG_IPUV3_CLK option and let the IPU clock frequency be
    configured in run-time on mx6.

    Reported-by: Eric Nelson
    Signed-off-by: Fabio Estevam
    Reviewed-by: Eric Nelson
    Reviewed-by: Stefano Babic
    [agust: fixed #endif in cgtqmx6eval.h]
    Signed-off-by: Anatolij Gustschin

    Fabio Estevam
     

08 Sep, 2017

1 commit

  • ae3584498   usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig ... Browse Code »
    1

    CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on
    USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and
    LAN78XX options under new menu. Finally update the defconfigs that need
    CONFIG_USB_HOST_ETHER.

    Signed-off-by: Chris Packham
    Reviewed-by: Simon Glass

    Chris Packham
     

02 Sep, 2017

1 commit

  • ecad7051b   configs: Migrate all of the existing USB symbols, except fastboot ... Browse Code »
    20

    This syncs all of the currently Kconfig'd symbols out of the headers and
    into the defconfig files. This has two exceptions, first am335x_evm
    needs to be converted to DM in SPL and then it can stop undef'ing
    CONFIG_DM_USB. Leaving this as-is results in a build failure, and
    without work, run time failure. The other case is am43xx_evm.h and in
    turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB
    host mode in SPL, but still desire to have gadget mode in U-Boot proper.

    Signed-off-by: Tom Rini

    Tom Rini
     

08 Aug, 2017

3 commits

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

12 Jul, 2017

2 commits

  • 552a848e4   imx: reorganize IMX code as other SOCs ... Browse Code »

    Change is consistent with other SOCs and it is in preparation
    for adding SOMs. SOC's related files are moved from cpu/ to
    mach-imx/.

    This change is also coherent with the structure in kernel.

    Signed-off-by: Stefano Babic

    CC: Fabio Estevam
    CC: Akshay Bhat
    CC: Ken Lin
    CC: Marek Vasut
    CC: Heiko Schocher
    CC: "Sébastien Szymanski"
    CC: Christian Gmeiner
    CC: Stefan Roese
    CC: Patrick Bruenn
    CC: Troy Kisky
    CC: Nikita Kiryanov
    CC: Otavio Salvador
    CC: "Eric Bénard"
    CC: Jagan Teki
    CC: Ye Li
    CC: Peng Fan
    CC: Adrian Alonso
    CC: Alison Wang
    CC: Tim Harvey
    CC: Martin Donnelly
    CC: Marcin Niestroj
    CC: Lukasz Majewski
    CC: Adam Ford
    CC: "Albert ARIBAUD (3ADEV)"
    CC: Boris Brezillon
    CC: Soeren Moch
    CC: Richard Hu
    CC: Wig Cheng
    CC: Vanessa Maegima
    CC: Max Krummenacher
    CC: Stefan Agner
    CC: Markus Niebel
    CC: Breno Lima
    CC: Francesco Montefoschi
    CC: Jaehoon Chung
    CC: Scott Wood
    CC: Joe Hershberger
    CC: Anatolij Gustschin
    CC: Simon Glass
    CC: "Andrew F. Davis"
    CC: "Łukasz Majewski"
    CC: Patrice Chotard
    CC: Nobuhiro Iwamatsu
    CC: Hans de Goede
    CC: Masahiro Yamada
    CC: Stephen Warren
    CC: Andre Przywara
    CC: "Álvaro Fernández Rojas"
    CC: York Sun
    CC: Xiaoliang Yang
    CC: Chen-Yu Tsai
    CC: George McCollister
    CC: Sven Ebenfeld
    CC: Filip Brozovic
    CC: Petr Kulhavy
    CC: Eric Nelson
    CC: Bai Ping
    CC: Anson Huang
    CC: Sanchayan Maity
    CC: Lokesh Vutla
    CC: Patrick Delaunay
    CC: Gary Bisson
    CC: Alexander Graf
    CC: u-boot@lists.denx.de
    Reviewed-by: Fabio Estevam
    Reviewed-by: Christian Gmeiner

    Stefano Babic
     
  • 3bf926c0d   Convert CONFIG_CMD_SATA to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_CMD_SATA

    Signed-off-by: Simon Glass
    Reviewed-by: Bin Meng

    Simon Glass
     

04 Jun, 2017

1 commit

  • 91d27a17c   Kconfig: Migrate FS_FAT / FAT_WRITE ... Browse Code »

    Now that these symbols are in Kconfig, migrate all users. Use imply on
    a number of platforms that default to having this enabled. As part of
    this we must migrate some straglers for CMD_FAT and DOS_PARTITION.

    Signed-off-by: Tom Rini

    Tom Rini
     

01 Jun, 2017

1 commit

  • 221a949eb   Kconfig: Finish migration of hashing commands ... Browse Code »

    Currently these (board agnostic) commands cannot be selected using
    menuconfig and friends. Fix this the obvious way. As part of this,
    don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v'
    and "we have a hashing command" as this makes the Kconfig logic odd.

    Signed-off-by: Daniel Thompson
    [trini: Re-apply, add imply for a few cases, run moveconfig.py, also
    migrate CRC32_VERIFY]
    Signed-off-by: Tom Rini

    Daniel Thompson
     

23 May, 2017

1 commit

  • 7a01f3c6f   Convert CONFIG_CMD_HDMIDETECT to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_CMD_HDMIDETECT

    Note that we cannot do 'default y if VIDEO' because this option is only
    enabled for a small subset of mx6 boards. Also this command is is not a
    great implementation (it doesn't use driver model).

    Signed-off-by: Simon Glass
    Reviewed-by: Tom Rini

    Simon Glass
     

22 May, 2017

1 commit

30 Apr, 2017

2 commits

20 Mar, 2017

3 commits

  • 02ccab190   Merge branch 'master' of git://www.denx.de/git/u-boot-imx ... Browse Code »

    Signed-off-by: Tom Rini

    Conflicts:
    configs/bk4r1_defconfig
    configs/colibri_vf_defconfig
    configs/pcm052_defconfig
    include/configs/colibri_vf.h
    include/configs/pcm052.h

    Tom Rini
     
  • f40574e2d   Kconfig: Migrate CONFIG_BAUDRATE ... Browse Code »

    Move this in to Kconfig with a default of 115200.

    Signed-off-by: Philipp Tomsich
    [trini: Run moveconfig.py, reword commit slightly]
    Signed-off-by: Tom Rini

    Philipp Tomsich
     
  • 9af131e35   colibri_imx7/colibri_imx6/apalis_imx6: limit bootm memory ... Browse Code »

    Limit memory used for relocation of FDT or initrd. This is
    required to make sure that relocated artifacts are within lowmem.
    If fdt_high or initrd_high are not set, U-Boot automatically
    relocates artifacts to the end of memory. But this area won't
    be part of lowmem and hence will not be accessible by the kernel
    during early boot.

    With VM split set to 2G/2G (i.MX default), only the 2GB Apalis
    iMX6 is affected by that issue. With VM split set to 3G/1G (ARM
    default) also modules with 1GB of memory are affected. With the
    latter the amount of lowmem will be 760MiB.

    The value must also not exceed available memory! Use a safe value
    of 512MiB for Apalis and 256MiB for Colibri.

    Signed-off-by: Stefan Agner
    Acked-by: Marcel Ziswiler

    Stefan Agner
     

19 Mar, 2017

1 commit

  • 3a649407a   arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD ... Browse Code »
    20

    Today, we have cases where we wish to build all of U-Boot in Thumb2 mode for
    various reasons. We also have cases where we only build SPL in Thumb2 mode due
    to size constraints and wish to build the rest of the system in ARM mode. So
    in this migration we introduce a new symbol as well, SPL_SYS_THUMB_BUILD to
    control if we build everything or just SPL (or in theory, just U-Boot) in
    Thumb2 mode.

    Signed-off-by: Tom Rini
    Acked-by: Siarhei Siamashka

    Tom Rini
     

13 Feb, 2017

1 commit

  • e856bdcfb   flash: complete CONFIG_SYS_NO_FLASH move with renaming ... Browse Code »
    20

    We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
    not completed. Finish this work by the tool.

    During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
    Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
    than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
    make the code more readable. Besides, negative meaning symbols do
    not fit in obj-$(CONFIG_...) style Makefiles.

    This commit was created as follows:

    [1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

    [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

    [3] Rename the instances in defconfigs by the following:
    find . -path './configs/*_defconfig' | xargs sed -i \
    -e '/CONFIG_SYS_NO_FLASH=y/d' \
    -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

    [4] Change the conditionals by the following:
    find . -name '*.[ch]' | xargs sed -i \
    -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
    -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
    -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
    -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

    [5] Modify the following manually
    - Rename the rest of instances
    - Remove the description from README
    - Create the new Kconfig entry in drivers/mtd/Kconfig
    - Remove the old Kconfig entry from common/Kconfig
    - Remove the garbage comments from include/configs/*.h

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada