29 Dec, 2017
1 commit
-
Secure boot is not enabled in warp imximage.cfg, add support for it.
Signed-off-by: Breno Lima
Reviewed-by: Fabio Estevam
12 Jul, 2017
2 commits
-
Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/.This change is also coherent with the structure in kernel.
Signed-off-by: Stefano Babic
CC: Fabio Estevam
CC: Akshay Bhat
CC: Ken Lin
CC: Marek Vasut
CC: Heiko Schocher
CC: "Sébastien Szymanski"
CC: Christian Gmeiner
CC: Stefan Roese
CC: Patrick Bruenn
CC: Troy Kisky
CC: Nikita Kiryanov
CC: Otavio Salvador
CC: "Eric Bénard"
CC: Jagan Teki
CC: Ye Li
CC: Peng Fan
CC: Adrian Alonso
CC: Alison Wang
CC: Tim Harvey
CC: Martin Donnelly
CC: Marcin Niestroj
CC: Lukasz Majewski
CC: Adam Ford
CC: "Albert ARIBAUD (3ADEV)"
CC: Boris Brezillon
CC: Soeren Moch
CC: Richard Hu
CC: Wig Cheng
CC: Vanessa Maegima
CC: Max Krummenacher
CC: Stefan Agner
CC: Markus Niebel
CC: Breno Lima
CC: Francesco Montefoschi
CC: Jaehoon Chung
CC: Scott Wood
CC: Joe Hershberger
CC: Anatolij Gustschin
CC: Simon Glass
CC: "Andrew F. Davis"
CC: "Łukasz Majewski"
CC: Patrice Chotard
CC: Nobuhiro Iwamatsu
CC: Hans de Goede
CC: Masahiro Yamada
CC: Stephen Warren
CC: Andre Przywara
CC: "Álvaro Fernández Rojas"
CC: York Sun
CC: Xiaoliang Yang
CC: Chen-Yu Tsai
CC: George McCollister
CC: Sven Ebenfeld
CC: Filip Brozovic
CC: Petr Kulhavy
CC: Eric Nelson
CC: Bai Ping
CC: Anson Huang
CC: Sanchayan Maity
CC: Lokesh Vutla
CC: Patrick Delaunay
CC: Gary Bisson
CC: Alexander Graf
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam
Reviewed-by: Christian Gmeiner -
CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT is not the correct method
to set I/O to 1.8. To boards that does not support vqmmc-supply,
use vs18_enable in fsl_esdhc_cfg. If regulator is supported,
use fixed 1.8V regulator for vqmmc-supply.Signed-off-by: Peng Fan
Cc: Jaehoon Chung
Cc: York Sun
Cc: Stefano Babic
26 Oct, 2016
1 commit
-
Fixed typo for doc/README.imximage on respective imximage.cfg files.
Cc: Tom Rini
Cc: Stefano Babic
Cc: Fabio Estevam
Acked-by: Peng Fan
Signed-off-by: Jagan Teki
07 Sep, 2016
1 commit
-
Since commit a13d3757f7df ("warp: Use imx_ddr_size() for calculating the
DDR size") warp board no longer boots.The reason for the breakage is that the warp board is using the DDR
configuration from mx6slevk. A fundamental difference between warp and
mx6slevk is that warp only uses one DDR chip select while mx6slevk uses two.The imx_ddr() function calculates the RAM size in runtime by reading the
values of registers MDCTL and MDMISC.So in order to fix this warp boot issue, create a imximage DDR file specific
to warp, where the MDCTL register is configured to only activates a single
chip select.Reported-by: Breno Lima
Signed-off-by: Fabio Estevam
Tested-by: Breno Lima
28 Jul, 2016
1 commit
-
imx_ddr_size() can be used to calculate the DDR size in runtime.
By using this function we no longer need to define PHYS_SDRAM_SIZE.
Signed-off-by: Fabio Estevam
06 Feb, 2016
1 commit
-
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).Signed-off-by: Bin Meng
Reviewed-by: Heiko Schocher
Reviewed-by: Simon Glass
Reviewed-by: Minkyu Kang
13 Sep, 2015
1 commit
-
Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Heiko Schocher
Cc: Christian Gmeiner
Cc: Stefan Roese
Cc: Troy Kisky
Cc: Nikita Kiryanov
Cc: "Eric Bénard"
Cc: Fabio Estevam
Cc: Tim Harvey
Cc: Marek Vasut
Cc: Markus Niebel
Cc: Otavio Salvador
Acked-by: Stefan Roese
Acked-by: Marek Vasut
Acked-by: Christian Gmeiner
Acked-by: Markus Niebel
Acked-by: Troy Kisky
Acked-by: Igor Grinberg
26 Jul, 2015
1 commit
-
Warp has a MAX77696 PMIC connected via I2C1 bus.
Add support for it.
Signed-off-by: Fabio Estevam
28 May, 2015
1 commit
-
After the mx6 config consolidation, 'save' command is no longer
recognized.Pass the full command name 'saveenv' instead.
Signed-off-by: Fabio Estevam
16 May, 2015
1 commit
-
Fix the spelling of 'successful'.
Signed-off-by: Fabio Estevam
13 Mar, 2015
1 commit
-
Provide instructions on how to upgrade U-boot in the eMMC.
Signed-off-by: Fabio Estevam
Acked-by: Otavio Salvador
02 Mar, 2015
1 commit
-
With UMS support we are able to flash the eMMC from U-boot, which is very
convenient.Add UMS support to make the eMMC flashing process easier.
Signed-off-by: Fabio Estevam
Acked-by: Otavio Salvador
23 Feb, 2015
1 commit
-
The WaRP Board is a Wearable Reference Plaform. The board features:
- Freescale i.MX6 SoloLite processor with 512MB of RAM
- Freescale FXOS8700CQ 6-axis Xtrinsic sensor
- Freescale Kinetis KL16 MCU
- Freescale Xtrinsic MMA955xL intelligent motion sensing platformThe board implements a hybrid architecture to address the evolving
needs of the wearables market. The platform consists of a main board
and an example daughtercard with the ability to add additional
daughtercards for different usage models.For more information about the project, visit:
http://www.warpboard.org/
Signed-off-by: Otavio Salvador
Reviewed-by: Marek Vasut
Acked-by: Stefano Babic