05 Dec, 2017
1 commit
-
Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI,
no eMMC, no build-in USB3.0 hub, no extension port pins, and no GPIO
button. USB3.0 ports are used for build-in JMicron USB to SATA bridge
and Gigabit R8152 ethernet chips. HC1 uses only passive cooling.This patch also updates Odroid's ADCmax array and reduces ADC tolerance
to 1% to ensure that XU4 and HC1 revisions are properly detected.I've tested this with XU3, XU3-lite, XU4 and HC1 boards. In case of my test
boards I got following values from ADC register: 372, 370, 1281 and 1313.Signed-off-by: Marek Szyprowski
Reviewed-by: Lukasz Majewski
Tested-by: Krzysztof Kozlowski
Signed-off-by: Minkyu Kang
02 Nov, 2015
1 commit
-
This commit adds additional file with implementation of board
detection code for Odroid-XU3/XU4.The detection depends on compatible found in fdt:
- "samsung,exynos5" - uses Exynos5 generic code
- "samsung,odroidxu3" - try detect XU3 revisionThere are few revisions of Odroid XU3/XU4, each can be detected
by checking the value of channel 9 of built-in ADC:
Rev ADC Board
0.1 0 XU3 0.1
0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT
0.3 1280 XU4 0.1The detection code depends on the ADC+10% value.
Implementation of functions:
- set_board_type() - read ADC and set type
- get_board_rev() - returns board revision: 1..3
- get_board_type() - returns board type stringAdditional functions with return values of bool:
- board_is_generic() - true if found compatible "samsung,exynos5"
but not "samsung,odroidxu3"
- board_is_odroidxu3() - true if found compatible "samsung,odroidxu3"
and one of XU3 revision.
- board_is_odroidxu4() - true if found compatible "samsung,odroidxu3"
and XU4 revision.After I2C controller init, the get_board_type() can check
if the XU3 board is a "Lite" variant, by probing chip
0x40 on I2C0 (INA231 - exists only on non-lite).
This is useful for setting fdt file name at misc_init_r().Enabled configs:
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- CONFIG_ODROID_REV_AIN
- CONFIG_REVISION_TAG
- CONFIG_BOARD_TYPESSigned-off-by: Przemyslaw Marczak
Cc: Minkyu Kang
Cc: Simon Glass
Tested-by: Anand Moon
Signed-off-by: Minkyu Kang
26 Feb, 2015
1 commit
-
This common call can be used for setting proper entities based
on dfu command arguments.
The config: CONFIG_SET_DFU_ALT_INFO, was used only for few configs,
and now it is common.The board file should implement:
- set_dfu_alt_info() functionSigned-off-by: Przemyslaw Marczak
Tested-by: Lukasz Majewski
[Test HW: Odroid U3 (Exynos 4412)]
05 Sep, 2014
2 commits
-
This change adds declaration of functions:
- set_board_type() - called at board_early_init_f()
- get_board_type() - called at checkboard()For supporting multiple board types in a one config - it is welcome
to display the current board model. This is what get_board_type()
should return.Signed-off-by: Przemyslaw Marczak
Cc: Minkyu Kang
Signed-off-by: Minkyu Kang -
This change introduces new common function:
- set_dfu_alt_info() - put dfu system and bootloader setting
into $dfu_alt_info.
functions declaration:
- char *get_dfu_alt_system(void)
- char *get_dfu_alt_boot(void)
- void set_dfu_alt_info(void)
and new config:
- CONFIG_SET_DFU_ALT_INFOThis function can be used for auto setting dfu configuration on boot.
Such feature is useful for multi board support by one u-boot binary.
Each board should define two functions:
- get_dfu_alt_system()
- get_dfu_alt_boot()Signed-off-by: Przemyslaw Marczak
Cc: Minkyu Kang
Signed-off-by: Minkyu Kang
07 May, 2014
2 commits
-
This change allows reset device environment to default without using u-boot
console, which is useful for system developers.Signed-off-by: Inha Song
Acked-by: Przemyslaw Marczak
Cc: Minkyu Kang
Signed-off-by: Minkyu Kang -
This menu option allows restore gpt.
This is usefull and no needs access to the u-boot console.
For proper operation:
- each partition uuid should be set in environment or
- CONFIG_RANDOM_UUID should be defined for automatically uuid settingAfter operation success device is going to be reset.
Signed-off-by: Przemyslaw Marczak
Cc: Minkyu Kang
Signed-off-by: Minkyu Kang
07 Feb, 2014
1 commit
-
This patch sets envs that describe board information.
The following envs are set: soc_id, soc_rev, board_rev.
Based on this information, if CONFIG_OF_LIBFDT is enabled,
the 'fdtfile' env is set as:
fdtfile=${soc_family}${soc_id}-${board}.dtbThe generated envs are intenionally not saved to persistent storage.
Signed-off-by: Piotr Wilczek
Signed-off-by: Kyungmin Park
Signed-off-by: Minkyu Kang
03 Feb, 2014
2 commits
-
This simple LCD menu allows run one of download mode on device
without writing on console or for fast and easy upgrade.This feature check user keys combination at boot:
- power key + volume up - download menu
- power key + volume down - thor mode (without menu)New configs:
- CONFIG_LCD_MENU
- CONFIG_LCD_MENU_BOARDFor proper effect this feature needs following definitions:
Power key:
- KEY_PWR_PMIC_NAME - (string) pmic which supports power key checkRegister address:
- KEY_PWR_STATUS_REG
- KEY_PWR_INTERRUPT_REGRegister power key mask:
- KEY_PWR_STATUS_MASK
- KEY_PWR_INTERRUPT_MASKGpio numbers:
- KEY_PWR_INTERRUPT_MASK
- KEY_VOL_DOWN_GPIOFunctions needs to be called:
- keys_init() - for set proper gpio direction
- check_boot_mode() - menu - main functionSigned-off-by: Przemyslaw Marczak
Signed-off-by: Minkyu Kang -
Changes:
new file:
- board/samsung/common/misc.c
depends on: CONFIG_MISC_COMMON
- move draw_logo() to misc.cconfigs: trats, trats2, universal:
- enable CONFIG_MISC_COMMON,
- enable CONFIG_MISC_INIT_R,
- add misc_init_r() and call draw_logo() in it.Signed-off-by: Przemyslaw Marczak
Signed-off-by: Minkyu Kang