11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
06 Feb, 2018
1 commit
-
cmd/Makefile has:
ifdef CONFIG_FPGA
obj-$(CONFIG_CMD_FPGA) += fpga.o
endifwhich means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
does nothing. Let's remove that Makefile conditional and instead express
this equivalent dependency in Kconfig, so a lot of redundant# CONFIG_CMD_FPGA is not set
can be removed from board defconfigs that don't actually have an FPGA.
Signed-off-by: Tuomas Tynkkynen
08 Dec, 2017
1 commit
-
The A33-OLinuXino defconfig was using the default CONS_INDEX value for
A33, which actually points to the R_UART, which is routed to the GPIO
header without proper pull-ups or diodes. The board has a separate
header for UART0, which are routed to pins PB0 and PB1. This header
is properly marked and is likely the first pins any user would try
to get a console.Fix CONS_INDEX in the defconfig so the console appears on UART0.
Fixes: ca5c37026be4 ("sunxi: Add support for A33-OLinuXino board")
Signed-off-by: Chen-Yu Tsai
Acked-by: Maxime Ripard
Reviewed-by: Jagan Teki
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
02 Sep, 2017
1 commit
-
This syncs all of the currently Kconfig'd symbols out of the headers and
into the defconfig files. This has two exceptions, first am335x_evm
needs to be converted to DM in SPL and then it can stop undef'ing
CONFIG_DM_USB. Leaving this as-is results in a build failure, and
without work, run time failure. The other case is am43xx_evm.h and in
turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB
host mode in SPL, but still desire to have gadget mode in U-Boot proper.Signed-off-by: Tom Rini
28 Jan, 2017
3 commits
-
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
09 Sep, 2016
1 commit
-
Signed-off-by: Tom Rini
03 Sep, 2016
1 commit
-
A33-OLinuXino is A33 development board designed by Olimex LTD.
It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector,
headphone and mic jacks, connector for LiPo battery and optional
4GB NAND Flash.It has two 40-pin headers. One for LCD panel, and one for
additional modules. Also there is CSI/DSI connector.The dts files are identical to the ones submitted to the upstream kernel.
Signed-off-by: Stefan Mavrodiev
Reviewed-by: Hans de Goede
Signed-off-by: Hans de Goede