09 Nov, 2020
1 commit
-
Update kernel_size_sd variable with correct value for lx2160a.
Signed-off-by: Manish Tomar
29 Oct, 2020
1 commit
-
Enable CONFIG_MPC8XXX_GPIO for SoC LX2160A
Signed-off-by: Biwen Li
08 Sep, 2020
1 commit
-
This patch add base support for LX2162AQDS board.
LX2162AQDS board supports LX2162A family SoCs.
This patch add basic support of platform.Signed-off-by: Ioana Ciornei
Signed-off-by: Zhao Qiang
Signed-off-by: hui.song
Signed-off-by: Manish Tomar
Signed-off-by: Vikas Singh
Signed-off-by: Meenakshi Aggarwal
Signed-off-by: Priyanka Jain
01 May, 2020
2 commits
-
Update mcinitcmd and bootcmd environment variable for emmc boot.
Signed-off-by: Meenakshi Aggarwal
-
Add QSFP transceiver detection at boot time. Transceiver model,
serial number and part number are displayed if module is detected.
An environment variable used by the Cortina 40G PHY is set, forcing
the initialization based on cable type.Signed-off-by: Florin Chiculita
30 Mar, 2020
3 commits
-
MC_INIT and BOOT command currently access spi-nor flash memory directly.
As per spi-mem framework, flash memory access via absolute addresses is
no more possible. Use flash APIs to access memory instead of directly
using it.Signed-off-by: Kuldeep Singh
Reviewed-by: Priyanka Jain -
Add dhcp in supported boot_targets for lx2160.
Signed-off-by: Meenakshi Aggarwal
Signed-off-by: Priyanka Jain -
Add emmc in supported boot_targets and
Add bootcmd environment variable for emmc boot.Signed-off-by: Meenakshi Aggarwal
Reviewed-by: Priyanka Jain
04 Feb, 2020
1 commit
-
Updates the secure boot headers offsets of Kernel and other
firmware images for SD and XSPI boot sources used by
esbc_validate command.Signed-off-by: Priyanka Singh
Reviewed-by: Priyanka Jain
24 Jan, 2020
1 commit
-
Create separate "boot_scripts" and "boot_script_hdr" environment
variable for LX2160A RDB and QDS board.Signed-off-by: Meenakshi Aggarwal
Reviewed-by: Priyanka Jain
26 Dec, 2019
1 commit
-
Maximum size of secure boot header to be read from MMC is
12KB which spans across 0x20 blocks.Hence increase the mmc read size for secure boot
headers from MMC to 0x20 blocks.Signed-off-by: Udit Agarwal
Reviewed-by: Priyanka Jain
21 Nov, 2019
1 commit
-
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.Cc: Wolfgang Denk
Cc: Joe Hershberger
Cc: Patrick Delaunay
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Simon Goldschmidt
12 Sep, 2019
1 commit
-
During boot, u-boot reads MC, DPL, DPC firmware from SD card
and copies to DDR. Update DDR addresses to which these firmwares
are copied as per memory map of these firmwares on SD-card
so that isolation between the regions of various firmwares
is maintained to avoid geting overwritten.Signed-off-by: Pankaj Bansal
Signed-off-by: Priyanka Jain
19 Jun, 2019
1 commit
-
Default environment variable is more complete. Also scans for efi
binaries for example.Signed-off-by: Mian Yousaf Kaukab
Reviewed-by: Prabhakar Kushwaha
22 May, 2019
1 commit
-
commit 58c3e62040be ("armv8: lx2160ardb : Add support for LX2160ARDB
platform") brought a new boards support with redundancy in the config.h.One of them is CONFIG_CMDLINE_EDITING which is removed by this change.
Cc: Priyanka Jain
Cc: Peng Ma
Cc: Prabhakar Kushwaha
Signed-off-by: Andy Shevchenko
Reviewed-by: Prabhakar Kushwaha
15 Mar, 2019
1 commit
-
ls2088, ls1088 : minimum MC Memory size is 128 MB
lx2 : minimum MC memory size is 256 MBSigned-off-by: Meenakshi Aggarwal
Acked-by: Joe Hershberger
Reviewed-by: Prabhakar Kushwaha
19 Feb, 2019
3 commits
-
Adds esbc validate command for verification of MC and DPC
firmware, along with secure boot defconfig.Also enable distro boot.
Signed-off-by: Udit Agarwal
Signed-off-by: Peng Ma
[PK: squash "enable DM support for SATA patch" & add maintainer]
Signed-off-by: Prabhakar Kushwaha -
Add u-boot enviroments to support distro boot which scan
boot.scr from external storage devices
(e.g. SD/USB/SCSI disk) and execute autoboot scriptSigned-off-by: Priyanka Jain
Reviewed-by: Prabhakar Kushwaha -
LX2160ARDB is an evaluation board that supports LX2160A
family SoCs. This patch add base support for this board.Signed-off-by: Wasim Khan
Signed-off-by: Yogesh Gaur
Signed-off-by: Meenakshi Aggarwal
Signed-off-by: Vabhav Sharma
Signed-off-by: Sriram Dash
Signed-off-by: Rajesh Bhagat
Signed-off-by: Pankit Garg
Signed-off-by: Yinbo Zhu
Signed-off-by: Peng Ma
Signed-off-by: Chuanhua Han
Signed-off-by: Priyanka Jain
[PK: Sqaush patches from Yinbo Zhu, Peng Ma, Chuanhua Han
and re-arrange defconfig]
Signed-off-by: Prabhakar Kushwaha