18 Aug, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_TWL4030_LED
CONFIG_TWL4030_INPUTThis also removes dead references to:
CONFIG_TWL4030_KEYPADSigned-off-by: Adam Ford
17 Aug, 2018
1 commit
-
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.Signed-off-by: Tom Rini
28 Apr, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_SPIThis partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver. For now, just update
the CONFIG tests. This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.Signed-off-by: Adam Ford
Signed-off-by: Tom Rini
16 Mar, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_CONS_INDEXWe have existing entries for this option in a number of places, with
different guards on them. They're also sometimes used for things not
directly inside of the serial driver. First, introduce a new symbol to
guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
need this for the serial driver, but for some other use, we can still do
it. Next, consolidate all of these into the single entry in
drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that
we can imply a correct value here to make the defconfig side of this
smaller.Signed-off-by: Adam Ford
[trini: Rework a lot of the logic here, such that I took authorship from
Adam, but kept his S-o-B line]
Signed-off-by: Tom Rini
28 Feb, 2018
1 commit
-
Enable networking command only when NET is enabled.
And remove selecting NET for CMD_NETSigned-off-by: Michal Simek
Signed-off-by: Tom Rini
06 Feb, 2018
1 commit
-
cmd/Makefile has:
ifdef CONFIG_FPGA
obj-$(CONFIG_CMD_FPGA) += fpga.o
endifwhich means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
does nothing. Let's remove that Makefile conditional and instead express
this equivalent dependency in Kconfig, so a lot of redundant# CONFIG_CMD_FPGA is not set
can be removed from board defconfigs that don't actually have an FPGA.
Signed-off-by: Tuomas Tynkkynen
23 Jan, 2018
2 commits
-
This converts the following to Kconfig:
CONFIG_TWL4030_USBSigned-off-by: Adam Ford
-
This converts the following to Kconfig:
CONFIG_USB_MUSB_HCD
CONFIG_USB_MUSB_UDC
CONFIG_USB_DAVINCI
CONFIG_USB_OMAP3
CONFIG_USB_DA8XX
CONFIG_USB_AM35XSigned-off-by: Adam Ford
31 Oct, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
28 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
15 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
14 Aug, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_OMAP3_SPISigned-off-by: Adam Ford
[trini: Minor comment tweaks]
Signed-off-by: Tom Rini
05 Aug, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_SYS_TEXT_BASEThe includes, whitelist, etc. were left for now but I don't get any
build errors or warnings on the omap3_logic_defconfig or
am3517_evm_defconfig builds I tried.Signed-off-by: Adam Ford
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHEREIn fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC
And then manual updates. This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.Signed-off-by: Simon Glass
Signed-off-by: Tom Rini
19 Jun, 2017
1 commit
-
Signed-off-by: Tom Rini
28 Apr, 2017
1 commit
-
In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs.
Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this
naming.Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim
down the arch/arm/Kconfig level.Signed-off-by: Masahiro Yamada
Reviewed-by: Tom Rini
19 Mar, 2017
1 commit
-
Today, we have cases where we wish to build all of U-Boot in Thumb2 mode for
various reasons. We also have cases where we only build SPL in Thumb2 mode due
to size constraints and wish to build the rest of the system in ARM mode. So
in this migration we introduce a new symbol as well, SPL_SYS_THUMB_BUILD to
control if we build everything or just SPL (or in theory, just U-Boot) in
Thumb2 mode.Signed-off-by: Tom Rini
Acked-by: Siarhei Siamashka
11 Jan, 2017
1 commit
-
Move (and rename) the following CONFIG options to Kconfig:
CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI)
CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS)
CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC)
CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS)
CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA)
CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI)They are the same option names as used in Linux.
This commit was created as follows:
[1] Rename the options with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g
s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g
s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g
s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g
s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g
s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g
'[2] Commit the changes
[3] Create entries in driver/mmc/Kconfig.
(copied from Linux)[4] Move the options with the following command
tools/moveconfig.py -y -r HEAD \
MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI[5] Sort and align drivers/mmc/Makefile for readability
Signed-off-by: Masahiro Yamada
Reviewed-by: Marek Vasut
04 Dec, 2016
1 commit
-
Also convert MENU while we're in here.
Signed-off-by: Tom Rini
24 Oct, 2016
4 commits
-
This converts the following to Kconfig:
CONFIG_VGA_AS_SINGLE_DEVICEOnce we migrate to driver model for video, we should be able to drop this
option.Signed-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CFB_CONSOLE_ANSISigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_IS_IN_ENV
CONFIG_CONSOLE_MUXSigned-off-by: Simon Glass
[trini: Re-order, re-migrate]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_VIDEOSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
Reviewed-by: Jagan Teki
10 Jun, 2016
1 commit
-
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.Signed-off-by: Heiko Schocher
Reviewed-by: Tom Rini
Acked-by: Viresh Kumar
Acked-by: Igor Grinberg
26 Apr, 2016
3 commits
-
Update the config.h and defconfig files for the commands that 8e3c036
converted over to KconfigSigned-off-by: Tom Rini
-
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND. Due to how we have used this historically
we need to take further care here when converting.Signed-off-by: Tom Rini
-
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove
all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default.Signed-off-by: Tom Rini
22 Nov, 2015
1 commit
-
Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py.
Signed-off-by: Thomas Chou
19 Nov, 2015
1 commit
-
Add CMD_GPIO to Kconfig and run tools/moveconfig.py .
Signed-off-by: Thomas Chou
Reviewed-by: Simon Glass
28 Sep, 2015
1 commit
-
Some boards' defconfigs are disordered. Reorder them.
Signed-off-by: Bin Meng
13 Aug, 2015
1 commit
-
Add option to set shell prompt string from menuconfig and migrate
boards globally.The migration is done as follows:
- Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
entry moved to their defconfig files.
- Boards that defined some kind of #ifdef logic which selects the
CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
right before the #ifdef logic and were left alone.
- This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
CONFIG_SYS_PROMPT was removed from all _common.h and _common.h
files. This results in a streamlined default value across platforms, and
includes the following files: spear-common, sunxi-common, mv-common,
ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
- Boards that relied on _common.h values of CONFIG_SYS_PROMPT were
not updated in their respective defconfig files under the assumption that
since they did not explicitly define a value, they're fine with whatever
the default is.
- On the other hand, boards that relied on a value defined in some
_common.h file such as woodburn_common, rpi-common,
bur_am335x_common, ls2085a_common, siemens_am33x_common, and
omap3_evm_common, had their values moved to the respective defconfig files.
- The define V_PROMPT was removed, since it is not used anywhere except for
assigning a value for CONFIG_SYS_PROMPT.Cc: Tom Rini
Cc: Masahiro Yamada
Cc: Stefano Babic
Cc: Igor Grinberg
Signed-off-by: Nikita Kiryanov
[trini: Add spring, sniper, smartweb to conversion]
Signed-off-by: Tom Rini
26 Jun, 2015
1 commit
-
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.Signed-off-by: Joe Hershberger
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini
09 Jun, 2015
1 commit
-
This patch moves the following config options to Kconfig:
CONFIG_AUTOBOOT_KEYED
CONFIG_AUTOBOOT_PROMPT
CONFIG_AUTOBOOT_DELAY_STR
CONFIG_AUTOBOOT_STOP_STR
AUTOBOOT_KEYED_CTRLCSigned-off-by: Stefan Roese
Reviewed-by: Simon Glass
[trini: Drop ip04 and pm9263 configs/ additions, those boards previously
set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over
all boards that did change. Make digsy_mtc_* string include seconds to
match others and not warn. ]
Signed-off-by: Tom Rini
Cc: Masahiro Yamada
19 Apr, 2015
1 commit
-
As mentioned in the previous commit, adding default values in each
Kconfig causes problems because it does not co-exist with the
"depends on" syntax. (Please note this is not a bug of Kconfig.)
We should not do so unless we have a special reason. Actually,
for CONFIG_DM*, we have no good reason to do so.Generally, CONFIG_DM is not a user-configurable option. Once we
convert a driver into Driver Model, the board only works with Driver
Model, i.e. CONFIG_DM must be always enabled for that board.
So, using "select DM" is more suitable rather than allowing users to
modify it. Another good thing is, Kconfig warns unmet dependencies
for "select" syntax, so we easily notice bugs.Actually, CONFIG_DM and other related options have been added
without consistency: some into arch/*/Kconfig, some into
board/*/Kconfig, and some into configs/*_defconfig.This commit prefers "select" and cleans up the following issues.
[1] Never use "CONFIG_DM=n" in defconfig files
It is really rare to add "CONFIG_FOO=n" to disable CONFIG options.
It is more common to use "# CONFIG_FOO is not set". But here, we
do not even have to do it.
Less than half of OMAP3 boards have been converted to Driver Model.
Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is
weird. Instead, add "select DM" only to appropriate boards, which
eventually eliminates "CONFIG_DM=n", etc.[2] Delete redundant CONFIGs
Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again
in configs/sandbox_defconfig.
Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and
defines it also in omap3_beagle_defconfig and devkit8000_defconfig.Signed-off-by: Masahiro Yamada
28 Mar, 2015
2 commits
-
This option has a bool type, not hex.
Fix it and enable it if CONFIG_DM is on because Driver Model always
requires malloc memory. Devices are scanned twice, before/after
relocation. CONFIG_SYS_MALLOC_F should be enabled to use malloc
memory before relocation. As it is board-independent, handle it
globally.Signed-off-by: Masahiro Yamada
Acked-by: Stephen Warren
Reviewed-by: Simon Glass
Acked-by: Robert Baldyga -
The default value of CONFIG_SYS_MALLOC_F_LEN is defined by ./Kconfig
as 0x400. Each defconfig or Kconfig need not repeat the same value.Signed-off-by: Masahiro Yamada
Acked-by: Stephen Warren
Reviewed-by: Simon Glass
Acked-by: Robert Baldyga
13 Feb, 2015
2 commits
-
Move this option to Kconfig and update all boards.
Signed-off-by: Simon Glass -
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.Signed-off-by: Simon Glass
31 Aug, 2014
1 commit
-
Becuase the board select menu in arch/arm/Kconfig is too big,
move the OMAP3 board select menu to omap3/Kconfig.Move also common settings (CONFIG_SYS_CPU="armv7" and
CONFIG_SYS_SOC="omap3Signed-off-by: Masahiro Yamada
Reviewed-by: Tom Rini