26 Mar, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_SF_DEFAULT_BUS
CONFIG_SF_DEFAULT_CS
CONFIG_SF_DEFAULT_MODE
CONFIG_SF_DEFAULT_SPEEDI use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.Signed-off-by: Patrick Delaunay
22 Feb, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
21 Feb, 2019
2 commits
-
Migrate USB_EHCI_TEGRA from headers to Kconfig
Signed-off-by: Peter Robinson
Cc: Tom Warren
Cc: Stephen Warren
Cc: Marek Vasut
Cc: Marcel Ziswiler
Cc: Peter.Chubb@data61.csiro.au
Cc: Lucas Stach
Cc: Stefan Agner
Cc: Alban Bedel
Cc: Allen Martin
Signed-off-by: Tom Warren -
Migrate SYS_I2C_TEGRA from headers to Kconfig
Signed-off-by: Peter Robinson
Cc: Tom Warren
Cc: Stephen Warren
Cc: Heiko Schocher
Cc: Marcel Ziswiler
Cc: Peter.Chubb@data61.csiro.au
Cc: Lucas Stach
Cc: Stefan Agner
Cc: Alban Bedel
Cc: Allen Martin
Signed-off-by: Tom Warren
08 Jan, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
04 Sep, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
17 Aug, 2018
1 commit
-
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.Signed-off-by: Tom Rini
07 Jul, 2018
1 commit
-
To build U-Boot on a Nyan Big Chromebook the docs outline adjusting the Tegra124
defined CONFIG_SYS_TEXT_BASE but this has since been moved to individual config
files. We should have the default required for U-Boot chain loading on the
chromebook as the default CONFIG_SYS_TEXT_BASE and update the docs to remove
this now non required step.Signed-off-by: Peter Robinson
Reviewed-by: Simon Glass
Signed-off-by: Tom Warren
04 Jun, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
17 Apr, 2018
1 commit
-
We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot
could load distro images that usually get shipped as iso images. These images
usually come with a board agnostic boot environment.However, there is very little point in having ISO support enabled (for anyone
really) in SPL, as the whole idea of SPL is to load U-Boot proper which again
is board specific. So the fact that we enable ISO support in U-Boot proper does
not mean at all that we want ISO support in U-Boot SPL.Hence, let's remove the Kconfig dependency. Along the way, let's also clean up
all those default configs that disabled SPL ISO support.Signed-off-by: Alexander Graf
09 Apr, 2018
1 commit
-
Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig.
Signed-off-by: Mario Six
[trini: Re-run migration]
Signed-off-by: Tom Rini
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
06 Feb, 2018
1 commit
-
cmd/Makefile has:
ifdef CONFIG_FPGA
obj-$(CONFIG_CMD_FPGA) += fpga.o
endifwhich means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
does nothing. Let's remove that Makefile conditional and instead express
this equivalent dependency in Kconfig, so a lot of redundant# CONFIG_CMD_FPGA is not set
can be removed from board defconfigs that don't actually have an FPGA.
Signed-off-by: Tuomas Tynkkynen
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
04 Oct, 2017
1 commit
-
The g_dnl USB settings for the vendor ID, product ID and manufacturer are
actually common settings that can and should be shared by all the gadgets.Make them common by renaming them, and convert all the users.
Reviewed-by: Simon Glass
Reviewed-by: Lukasz Majewski
Signed-off-by: Maxime Ripard
08 Sep, 2017
2 commits
-
This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig.
Update defconfigs.Signed-off-by: Chris Packham
Reviewed-by: Simon Glass -
CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on
USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and
LAN78XX options under new menu. Finally update the defconfigs that need
CONFIG_USB_HOST_ETHER.Signed-off-by: Chris Packham
Reviewed-by: Simon Glass
15 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
29 Jul, 2017
2 commits
-
Change these board to use a live device tree after relocation.
Signed-off-by: Simon Glass
Tested-by: Marcel Ziswiler
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren -
Convert this PMIC driver to driver model and fix up other users. The
regulator and GPIO functions are now handled by separate drivers.Update nyan-big to work correct. Three boards will need to be updated by
the maintainers: apalis-tk1, cei-tk1-som. Also the TODO in the code re
as3722_sd_set_voltage() needs to be completed.Signed-off-by: Simon Glass
Reviewed-by: Lukasz Majewski
Tested-by: Marcel Ziswiler
Tested-on: Jetson-TK1
Tested-by: Stephen Warren
26 Jul, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
12 Jul, 2017
2 commits
-
Enable full bootstage support so we can time SPL and U-Boot.
Signed-off-by: Simon Glass
Tested-by: Marcel Ziswiler
Tested-on: Beaver, Jetson-TK1 -
Enable this to allow debugging when the serial UART driver is
misconfigured.Signed-off-by: Simon Glass
Tested-by: Marcel Ziswiler
Tested-on: Beaver, Jetson-TK1
10 Jun, 2017
1 commit
-
Enable this so we can roughly measure CPU performance. Also enable the
cache command to allow for timing.Signed-off-by: Simon Glass
01 Jun, 2017
1 commit
-
Enable CONFIG_DM_MMC_OPS and CONFIG_BLK for all Tegra devices. This moves
Tegra to use driver model fully for MMC.Signed-off-by: Simon Glass
16 May, 2017
1 commit
-
Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig.
For a few SoCs, imply or default y this if USB is enabled. In some
cases we had not already migrated to CONFIG_USB so do that as well.Cc: Marek Vasut
Signed-off-by: Tom Rini
Reviewed-by: Marek Vasut
30 Apr, 2017
2 commits
-
This converts the following to Kconfig:
CONFIG_CMD_BMPSigned-off-by: Simon Glass
[trini: Add depends on LCD || DM_VIDEO || VIDEO]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_PMIC_AS3722Signed-off-by: Simon Glass
28 Jan, 2017
3 commits
-
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
24 Jan, 2017
1 commit
-
This option should not really be user selectable. Note that on PowerPC
we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be
conditional on that.Signed-off-by: Tom Rini
Acked-by: Masahiro Yamada (for UniPhier)
22 Jan, 2017
1 commit
-
Cc: Tom Rini
Signed-off-by: Jagan Teki
04 Dec, 2016
1 commit
-
A number of platforms had been using the distro default feature before
it was moved to Kconfig but did not enable the new Kconfig option when
it was enabled. This caused a regression in terms of features and this
introduces breakage when more things move to Kconfig.Signed-off-by: Tom Rini
24 Oct, 2016
2 commits
-
This converts the following to Kconfig:
CONFIG_SYS_STDIO_DEREGISTERThis option should never be enabled in SPL, so use
CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER) when checking the option.Signed-off-by: Simon Glass
[trini: Re-sync]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_IS_IN_ENV
CONFIG_CONSOLE_MUXSigned-off-by: Simon Glass
[trini: Re-order, re-migrate]
Signed-off-by: Tom Rini
12 Oct, 2016
2 commits
-
These two options go together and it is best to do the conversion in one
step. So enable DM_MMC_OPS by default if DM_MMC is enabled.Signed-off-by: Simon Glass
-
To speed up conversion to CONFIG_BLK, enable it by default when DM_MMC is
enabled.Signed-off-by: Simon Glass
27 Sep, 2016
1 commit
-
Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for
CMD_DFU (as we must have the DFU command enabled to do anything DFU).
Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add
options for all of the back end choices that DFU can make use of.Cc: Lukasz Majewski
Signed-off-by: Tom Rini
Acked-by: Lukasz Majewski
10 Sep, 2016
1 commit
-
In some cases we were missing CONFIG_USB=y so enable that when needed.
Reviewed-by: Masahiro Yamada
Signed-off-by: Tom Rini