08 Jan, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
04 Dec, 2018
1 commit
-
Bundle DTBs for R8A7795, R8A7796 ULCB variants into single U-Boot
build and let U-Boot choose between them based on the CPU model.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
03 Dec, 2018
1 commit
-
Enable the HS400 support code on H3, M3W, M3N Salvator-X(S)
and ULCB boards as well as E3 Ebisu board.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
19 Oct, 2018
1 commit
-
This patch removes 'console=' argument, because kernel uses
stdout-path as parameter.Signed-off-by: Hiroyuki Yokoyama
04 Sep, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
17 Apr, 2018
1 commit
-
Enable fitImage support to be on the right side of the millenium.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
14 Apr, 2018
1 commit
-
Drop the CONFIG_MMC_RENESAS_TUNING symbol from Gen3 configs.
This symbol is no longer used after the Matsushita SDHI driver,
instead the renesas-sdhi driver uses CONFIG_MMC_HS200_SUPPORT
to discern whether the tuning support should be compiled in.Signed-off-by: Marek Vasut
Cc: Tom Rini
Cc: Nobuhiro Iwamatsu
--
V2: Submit this on top of configs which are actually in mainline
12 Apr, 2018
2 commits
-
Enable the HS200 on RCar Gen3 platforms, since the SDHI core supports it.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu -
Since the Renesas SDHI has it's own custom driver sharing the
common code with Uniphier one, adjust the Kconfig entries.Signed-off-by: Marek Vasut
Cc: Jaehoon Chung
Cc: Masahiro Yamada
24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
16 Feb, 2018
1 commit
-
Enable support for applying DT overlays on Gen3. This is convenient
for handling extra additional hardware, like ie. the Kingfisher.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
25 Jan, 2018
1 commit
-
Pull out u-boot extras into dtsi files to make synchronization of DTS
from Linux kernel as easy as a simple copy. All the U-Boot extras are
now in *-u-boot.dts* files instead.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
30 Nov, 2017
5 commits
-
Rework the ULCB CPLD driver and make it into a sysreset driver,
since that is what the ULCB CPLD driver is mostly for.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu -
Stop using the old ad-hoc SH I2C driver and use the new RCar IIC
driver instead. The SH I2C driver should be deprecated and removed
eventually.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu -
Mark the PRR as u-boot,dm-pre-reloc in all Gen3 board DTs as it is
needed very early and turn on the CONFIG_SYSCON to allow the PRR
driver to bind as a syscon uclass.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu -
Enable the XHCI support on all boards.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu -
Enable the Micrel KSZ90x1 driver on ULCB, since the board is populated
with KSZ9031 and without this driver, the PHY cannot be operated.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
11 Oct, 2017
2 commits
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
04 Oct, 2017
1 commit
-
Enable pinconf since it's now implemented and used in the DTs.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
28 Sep, 2017
3 commits
-
Enable the PFC pinmux and GPIO drivers and disable the SH GPIO combo
driver. This allows the drivers to obtain pinmux and GPIO configuration
from DT rather than hard-coding it in board files.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
Regulators are needed for the MMC framework to let it toggle the SD power.
Enable DM regulator support and support for fixed and GPIO regulator.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu -
The UniPhier SD driver handles the same Matsushita IP as is used
in the Renesas RCar SoCs, yet the driver is significantly better
than the SH SDHI one. Switch over to the Uniphier driver.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
24 Sep, 2017
2 commits
-
This command is convenient for manipulating the GPIOs, so enable it.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
Just move those config options from macros to configs.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
13 Sep, 2017
1 commit
-
Enable the EHCI generic driver, which is superior to ad-hoc SoC specific one.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
08 Sep, 2017
1 commit
-
Disable CONFIG_ARCH_FIXUP_FDT_MEMORY to prevent U-Boot from modifying
the memory {} nodes in the DT passed to the Linux kernel. The R8A779x
DT contains multiple memory {} nodes, while U-Boot only modifies the
first one and stuffs all the memory entries into it, which is wrong.
Disabling CONFIG_ARCH_FIXUP_FDT_MEMORY is the least intrusive way to
fix the issue this close to the release, while the real fix is to
extend the fdt_fixup_memory_banks() to handle multiple memory nodes
in DT.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
26 Aug, 2017
2 commits
-
Enable the MMC and USB DM on the board since it's the modern method
and now supported by the drivers.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
The HUSH parser was disabled somewhere along the way, reenable it.
Signed-off-by: Marek Vasut
Cc: Alexandru Gagniuc
Cc: Joe Hershberger
Signed-off-by: Nobuhiro Iwamatsu
16 Aug, 2017
1 commit
-
At present we support multiple environment drivers but there is not way to
select between them at run time. Also settings related to the position and
size of the environment area are global (i.e. apply to all locations).Until these limitations are removed we cannot really support more than one
environment location. Adjust the location to be a choice so that only one
can be selected. By default the environment is 'nowhere', meaning that the
environment exists only in memory and cannot be saved.Also expand the help for the 'nowhere' option and move it to the top since
it is the default.Signed-off-by: Simon Glass
[trini: Move all of the imply logic to default X if Y so it works again]
Signed-off-by: Tom Rini
15 Aug, 2017
1 commit
-
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.Signed-off-by: Sam Protsenko
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini
03 Aug, 2017
5 commits
-
This updates defconfig of R-Car Gen3 to keep with the latest Kconfig.
Signed-off-by: Nobuhiro Iwamatsu
-
Convert the SH Serial to Kconfig using tools/moveconfig.py tool
and a bit of manual adjustment to cater for failed conversions.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
Since there is now a clock driver for RCar Gen3, enable it on this board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
Since the DTs are now in place, enable OF control so that they get
bundled into the U-Boot.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
Add initial support for the R8A7795 and R8A7796 based ULCB board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu