02 Feb, 2018
1 commit
-
This commit moves USB_FUNCTION_MASS_STORAGE config to Kconfig.
Signed-off-by: Lukasz Majewski
Reviewed-by: Jaehoon Chung
13 Dec, 2017
2 commits
-
This symbol enables some library code used by various SATA drivers,
so make this a non-user-visible symbol select'ed by the respective
drivers, and let moveconfig handle the rest.Signed-off-by: Tuomas Tynkkynen
-
Signed-off-by: Tuomas Tynkkynen
04 Oct, 2017
2 commits
-
We need to select an interface for the usb_ether gadget, and they haven't
been converted to Kconfig yet. Add a choice to make sure we have an option
selected, and convert all the users.Reviewed-by: Łukasz Majewski
Reviewed-by: Simon Glass
Signed-off-by: Maxime Ripard -
The USB Ethernet gadget option has not yet been moved to Kconfig, let's
deal with that.Reviewed-by: Łukasz Majewski
Reviewed-by: Simon Glass
Signed-off-by: Maxime Ripard
11 Sep, 2017
1 commit
-
MX6Q/QP IPU operates at 264MHz and MX6DL IPU at 198MHz.
When running a SPL target, which supports multiple MX6 variants we cannot
properly setup the IPU clock frequency via CONFIG_IPUV3_CLK option as
such decision is done in build-time currently.Remove the CONFIG_IPUV3_CLK option and let the IPU clock frequency be
configured in run-time on mx6.Reported-by: Eric Nelson
Signed-off-by: Fabio Estevam
Reviewed-by: Eric Nelson
Reviewed-by: Stefano Babic
[agust: fixed #endif in cgtqmx6eval.h]
Signed-off-by: Anatolij Gustschin
08 Sep, 2017
2 commits
-
This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig.
Update defconfigs.Signed-off-by: Chris Packham
Reviewed-by: Simon Glass -
CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on
USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and
LAN78XX options under new menu. Finally update the defconfigs that need
CONFIG_USB_HOST_ETHER.Signed-off-by: Chris Packham
Reviewed-by: Simon Glass
02 Sep, 2017
2 commits
-
- Move ANDROID_IMAGE_SUPPORT to top level Kconfig under images as it's
not strictly part of fastboot.
- Add some defaults for the fastboot buffer location and size
- Migrate all options listed in cmd/fastboot/Kconfig
- Cleanup the READMESigned-off-by: Tom Rini
-
This syncs all of the currently Kconfig'd symbols out of the headers and
into the defconfig files. This has two exceptions, first am335x_evm
needs to be converted to DM in SPL and then it can stop undef'ing
CONFIG_DM_USB. Leaving this as-is results in a build failure, and
without work, run time failure. The other case is am43xx_evm.h and in
turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB
host mode in SPL, but still desire to have gadget mode in U-Boot proper.Signed-off-by: Tom Rini
08 Aug, 2017
3 commits
-
Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger -
Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger -
These boards will now use the ksz90x1 driver instead of the mess in
ksz8xxx. This change is needed before the two drivers can be fully
separated.Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger
26 Jul, 2017
2 commits
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_SPI_FLASHSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHEREIn fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC
And then manual updates. This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.Signed-off-by: Simon Glass
Signed-off-by: Tom Rini
12 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_SATASigned-off-by: Simon Glass
Reviewed-by: Bin Meng
23 May, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_HDMIDETECTNote that we cannot do 'default y if VIDEO' because this option is only
enabled for a small subset of mx6 boards. Also this command is is not a
great implementation (it doesn't use driver model).Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
16 May, 2017
2 commits
-
The following options are migrated over fully now:
- USB_EHCI_ATMEL
- USB_EHCI_MARVELL
- USB_EHCI_MX6
- USB_EHCI_MX7
- USB_EHCI_MSM
- USB_EHCI_ZYNQ
- USB_EHCI_GENERICThis also requires fixing the depends on USB_EHCI_MARVELL as it's used
by Orion5X and Kirkwood as well.Cc: Marek Vasut
Signed-off-by: Tom Rini
Reviewed-by: Marek Vasut -
Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig.
For a few SoCs, imply or default y this if USB is enabled. In some
cases we had not already migrated to CONFIG_USB so do that as well.Cc: Marek Vasut
Signed-off-by: Tom Rini
Reviewed-by: Marek Vasut
15 May, 2017
1 commit
-
In order to be able to migrate the various SoC EHCI CONFIG options we
first need to finish the switch from CONFIG_USB_EHCI to
CONFIG_USB_EHCI_HCD.Cc: Marek Vasut
Signed-off-by: Tom Rini
Reviewed-by: Marek Vasut
30 Apr, 2017
2 commits
-
This converts the following to Kconfig:
CONFIG_CMD_BMPSigned-off-by: Simon Glass
[trini: Add depends on LCD || DM_VIDEO || VIDEO]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_CMD_BMODESigned-off-by: Simon Glass
[trini: Make this default y and depend on mx5/6/7]
Signed-off-by: Tom Rini
27 Jan, 2017
1 commit
-
USB Host scanning has been broken since v2016.05.
This is due to all the USB changes that happened between v2016.03
and v2016.05, especially:
2ef117fe4f usb: Remove 200 ms delay in usb_hub_port_connect_change()
a22a264ec3 usb: Change power-on / scanning timeout handlingSo we need to increase the init delay to 2s using the usb_pgood_delay
environment variable.Signed-off-by: Gary Bisson
26 Jan, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass
28 Oct, 2016
2 commits
-
Introduce CONFIG_PCI_PNP in Kconfig and move over boards' defconfig
to use that.Signed-off-by: Bin Meng
Reviewed-by: Tom Rini
[trini: Re-generate configs and include/configs/ changes]
Signed-off-by: Tom Rini -
Add 'PCI' as a menu option and migrate all existing users.
Signed-off-by: Tom Rini
Acked-by: Stephen Warren
24 Oct, 2016
6 commits
-
This converts the following to Kconfig:
CONFIG_USB_KEYBOARDSigned-off-by: Simon Glass
[trini: Fixup MPC86* configs]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINESigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_VGA_AS_SINGLE_DEVICEOnce we migrate to driver model for video, we should be able to drop this
option.Signed-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_CFB_CONSOLESigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_IS_IN_ENV
CONFIG_CONSOLE_MUXSigned-off-by: Simon Glass
[trini: Re-order, re-migrate]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_VIDEOSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
Reviewed-by: Jagan Teki
10 Sep, 2016
1 commit
-
In some cases we were missing CONFIG_USB=y so enable that when needed.
Reviewed-by: Masahiro Yamada
Signed-off-by: Tom Rini
26 Apr, 2016
3 commits
-
Update the config.h and defconfig files for the commands that 8e3c036
converted over to KconfigSigned-off-by: Tom Rini
-
A number of moveconfig.py runs have left a instances of multiple empty
lines in a row. Correct this to a single empty line.Signed-off-by: Tom Rini
-
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND. Due to how we have used this historically
we need to take further care here when converting.Signed-off-by: Tom Rini
20 Apr, 2016
4 commits
-
And also reformat defconfigs using "make savedefconfig" rule.
Signed-off-by: Sam Protsenko
-
While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some
config headers. This is also probably fixes am335x_baltos board.Signed-off-by: Sam Protsenko
-
Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and
make all UDC controllers select USB_GADGET_DUALSPEED:
- add next options to Kconfig selecting USB_GADGET_DUALSPEED:
- USB_GADGET_ATMEL_USBA
- USB_GADGET_DWC2_OTG
- USB_DWC3
- CI_UDC
- make USB_MUSB_GADGET select USB_GADGET_DUALSPEEDWhile at it, make some related fixes:
- remove DUALSPEED from configs that don't enable gadget support:
- kwb.h
- tseries.h
- add missing USB_GADGET option to next configs:
- novena_defconfig
- pcm051_rev*_defconfig
- xfi3_defconfigSigned-off-by: Sam Protsenko
-
The description was borrowed from kernel. Definitions were added to
defconfig files in a way that "make savedefconfig" generates exactly
the same file as used defconfig.Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use
2 mA (as minimal allowed by Kconfig).Signed-off-by: Sam Protsenko