Eric Lee / smarc-uboot

01 Feb, 2019

3 commits

08 Jan, 2019

1 commit

14 Nov, 2018

1 commit

18 Aug, 2018

1 commit

04 Jun, 2018

1 commit

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

17 Apr, 2018

2 commits

  • 34b3722e3   configs: Resync with savedefconfig ... Browse Code »

    Rsync all defconfig files using moveconfig.py

    Signed-off-by: Tom Rini

    Tom Rini
     
  • 4f67b93fb   part: Disable CONFIG_SPL_ISO_PARTITION by default ... Browse Code »

    We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot
    could load distro images that usually get shipped as iso images. These images
    usually come with a board agnostic boot environment.

    However, there is very little point in having ISO support enabled (for anyone
    really) in SPL, as the whole idea of SPL is to load U-Boot proper which again
    is board specific. So the fact that we enable ISO support in U-Boot proper does
    not mean at all that we want ISO support in U-Boot SPL.

    Hence, let's remove the Kconfig dependency. Along the way, let's also clean up
    all those default configs that disabled SPL ISO support.

    Signed-off-by: Alexander Graf

    Alexander Graf
     

14 Apr, 2018

1 commit

09 Apr, 2018

2 commits

08 Apr, 2018

1 commit

07 Apr, 2018

1 commit

23 Feb, 2018

1 commit

21 Oct, 2017

1 commit

  • 0a9ef4515   Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_NAND_MXC
    CONFIG_NAND_OMAP_GPMC
    CONFIG_NAND_OMAP_GPMC_PREFETCH
    CONFIG_NAND_OMAP_ELM
    CONFIG_SPL_NAND_AM33XX_BCH
    CONFIG_SPL_NAND_SIMPLE
    CONFIG_SYS_NAND_BUSWIDTH_16BIT

    Signed-off-by: Adam Ford
    Reviewed-by: Heiko Schocher
    [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues,
    add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

30 Sep, 2017

1 commit

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

14 Aug, 2017

1 commit

08 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

25 Jul, 2017

1 commit

19 Jun, 2017

1 commit

04 Jun, 2017

1 commit

  • 91d27a17c   Kconfig: Migrate FS_FAT / FAT_WRITE ... Browse Code »

    Now that these symbols are in Kconfig, migrate all users. Use imply on
    a number of platforms that default to having this enabled. As part of
    this we must migrate some straglers for CMD_FAT and DOS_PARTITION.

    Signed-off-by: Tom Rini

    Tom Rini
     

28 Apr, 2017

2 commits

14 Mar, 2017

1 commit

28 Jan, 2017

4 commits

24 Jan, 2017

1 commit

22 Jan, 2017

1 commit

11 Jan, 2017

1 commit

  • 1d2c0506d   mmc: move more driver config options to Kconfig ... Browse Code »

    Move (and rename) the following CONFIG options to Kconfig:

    CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI)
    CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS)
    CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC)
    CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS)
    CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA)
    CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI)

    They are the same option names as used in Linux.

    This commit was created as follows:

    [1] Rename the options with the following command:

    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e '
    s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g
    s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g
    s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g
    s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g
    s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g
    s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g
    '

    [2] Commit the changes

    [3] Create entries in driver/mmc/Kconfig.
    (copied from Linux)

    [4] Move the options with the following command
    tools/moveconfig.py -y -r HEAD \
    MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI

    [5] Sort and align drivers/mmc/Makefile for readability

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Marek Vasut

    Masahiro Yamada
     

24 Oct, 2016

1 commit

15 Oct, 2016

1 commit

02 Oct, 2016

1 commit

  • b39a9ade5   Kconfig: Separate AM33XX SOC config from target board config ... Browse Code »

    The config option AM33XX is used in several boards and should be
    defined as a stand-alone option for this SOC. We break this out
    from target boards that use this SoC and common headers then enable
    AM33XX on in all the boards that used these targets to eliminate any
    functional change with this patch.

    This is similar to what has already been done in
    9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig")
    and is done for the same reasons.

    Signed-off-by: Andrew F. Davis
    Acked-by: Lokesh Vutla
    Reviewed-by: Tom Rini

    Andrew F. Davis